Professional Documents
Culture Documents
TA202A: Quiz 4
Q.1
The micrometer scales are in metric system. The least count of the micrometer is 0.01 mm. What is the reading
in mm in the micrometer?
6.54
Q.2
A shaft has dimensions 40.0−0.010
−0.025
mm. The tolerance provided in mm is
0.015
Q.3
The micrometer scales are in metric system. The least count of the micrometer is 0.01 mm. What is the reading
9.83
Q.4
In a hole and pin assembly, the hole dimensions are specified as 20.0+0.040 mm and the pin dimensions are
+0.020
specified as 20.0+0.005
−0.008
mm. What is the minimum clearance in the assembly in mm?
0.015
Q.5
See the vernier caliper below. The scales are in metric system. The least count of the caliper is 0.1 mm. What is
the reading displayed in mm?
https://hello.iitk.ac.in/ta202a22/#/quiz/221 1/4
4/19/22, 8:43 AM TA202A: Manufacturing Processes Ii
Q.6
See the vernier caliper below. The scales are in metric system. The least count of the caliper is 0.1 mm. What is
the reading displayed in mm?
https://hello.iitk.ac.in/ta202a22/#/quiz/221 2/4
4/19/22, 8:43 AM TA202A: Manufacturing Processes Ii
Q.7
Suggest if the following statement is true:
An object has a true dimension of 30.00 mm. A measurement device takes three readings from the object A, B and
C as given:
A: 24.31
B: 31.17
C.34.50
Both imprecise and inaccurate
None of the above
Imprecise
Inaccurate
Q.8
See the image below:
https://hello.iitk.ac.in/ta202a22/#/quiz/221 3/4
4/19/22, 8:43 AM TA202A: Manufacturing Processes Ii
−−−−−−−−−−−−−
H = (R + r) + √2D(R + r) − D
2
−−−−−−
H = D + √r2 + R2
H = (R + r) + (D + r)
−−− −−−−
H 2
= (R + r) + √D − R
2
Q.9
A shaft has a dimension 20.0+0.05
−0.01
mm and it is to be fit in a hole with dimension 20.0+0.10
+0.07
mm. What is the
allowance in mm ?
0.08
0.11
0.05
0.02
Q.10
A hole is of dimension Ø 9.0+0.015
+0.0
mm. The corresponding shaft is of dimension Ø 9.0+0.001
+0.010
mm. The resulting
assembly has
Interference fit
Transition fit
loose fit
slide fit
SAVE
SUBMIT
https://hello.iitk.ac.in/ta202a22/#/quiz/221 4/4