Professional Documents
Culture Documents
, LTD
福建省向宝能源科技有限公司
Pre-assembled in factory
Components Details
Advantage 2: Slide Slot Fixing Design (Take maintenance into consideration)
Landscape Layout Portrait Layout
Advantage:
The bottom of the portrait beam is fixed with the leg on both sides with Portrait
Beam Clamp Kit, so the contact surface between them becomes larger, it is
stable even when pulled out by an earthquake or strong wind.
Rail Rail Splice Kit Mid Clamp Kit End Clamp Kit Rail Rail Splice Kit Mid Clamp Kit End Clamp Kit Disadvantage:Higher Cost
NEWSUNPOWER Design
Advantage:Cheaper
Disadvantage:
① As shown in the picture, the groove under the portrait beam is easily broken when a
Legs/Diagonal force is applied from the bottom to the top if Typhoon comes.
Rail Clamp Kit Portrait Beam Portrait Beam Clamp Kit Draw Bars Leg Base Kit ② If the bolts are loosened after installation, the maintenance of the bolts under the
Others Design portrait beam will be very difficult.
Connection Details
Landscape Layout Portrait Layout Advantage 3: Tested and Verified as High Strength
Structure Type
Appropriate load tests are performed on Clamp Kit, Rail and other fixing components.
W type N type A type 2N type
The strengths are all within the allowable range for various design loads and within allowable physical strengths after
testing and verification.
Material AL60005-T5
Mid Clamp Kit End Clamp Kit Mid Clamp Kit End Clamp Kit
Surface Treatment Anodized 10~12μm
Layout Landscape/Portrait
Rail and Portrait Beam and Legs/Diagonal Draw Bars Foundation Ground Screw/Concrete Base
Portrait Legs/Diagonal and Ground Screw
Beam Grounding Clip,Rail End Cap,Inverter Fixing
Draw Bars Optional items
Members,Fence,Weedproof Mat
P11 P12
FUJIAN NEWSUNPOWER ENERGY TECH. CO., LTD
福建省向宝能源科技有限公司
Slope Land Salt Land HeavySnow Strong Wind 10yrs 25yrs Slope Land Salt Land HeavySnow Strong Wind 10yrs 25yrs
Warranty Lifespan Warranty Lifespan
Portrait
Layout
Advantage 1: Advantage 2:
Convenient installation and safe operation No limit on panels thickness
Advantage 1: Advantage 2:
Suitable for projects in heavy snow districts, with high Suitable for any thickness solar panels
Easy to handle with the slopes Adjustable ground screw test verified ground clearance and large tilt angle required. No need to keep stocks for various size of clamps,
For such projects, the routine work of panels installa- makes installation efficiency!
Drawings show slopes with A strength test performed on the joint to confirm tion from the top is dangerous and requires a lot of
East-West & North-South orientations the design load within the allowable stress range. time and effort.
With back locking rail clamp kit, the installation is
98 more convenient and safer from the back side.
6796
Advantage 3: Advantage 4:
CR13 330 6600
104 1684*4 0*2
4300 860 20
4-1002 4092 412
28
10°
315
400
0
160 17
755
25
1120
5°
2-504
2900
For traditional fixing solution, 4 rows x 1 column are Using traditional mid/end clamp kits to fasten panels on the
10°
2-2900
200
254
1800
200
2910
531
fixed at 10 points. top, snow is likely to hang on the clamp kits and rail channels,
2899 600 2-2856
For back locking method, 4 rows x 1 column are fixed while using back locking rail clamp kits, the panels are aligned
at 16 points, so it can be fixed much more firmly. neatly and there are no gaps, which can solve the problem of
snow blockage.
Advantage 3: Advantage 4:
North-south direction adjustable East-west direction adjustable
Adjustable Ground Screw allows height differences to 0-30 degrees adjustable from East to West is allowed
With Accumulated Snow Snow Slide Off
be adjusted for slopes without land leveling. for slopes without land leveling.
Tradtional Clamps Back Locking Clamps
P13 P14
FUJIAN NEWSUNPOWER ENERGY TECH. CO., LTD
福建省向宝能源科技有限公司
Mounting Solution for Frameless Panels Mounting System for Bifacial Panels
① Maximize solar panel power generation rate. ② Using with bifacial solar panels, electricity can be
Applicable for panels both in landscape and portrait generated from both frontside and backside.
orientation.
③ More and lengthened mid/end clamp kits adopted ④ Installed with reflective weed-proof sheets will
to protect and fix the panels better. make better outcome further.
Project Show
10yrs 25yrs
Warranty Lifespan
Panel & Mid Clamp Kit Panel & End Clamp Kit
m
80m
EPDM
Applicable for 4~8mm、6~10mm frameless panels
Length:80mm
Contact Surface
Width:14.5mm
With rotective rubber made of EPDM material setted in the sides of the clamps,
Safeguard to avoid the clamps direct contacting with solar panels
Serrated rubbers realize firmer and safer fixing
P15 P16