Professional Documents
Culture Documents
gehealthcare.com
Technical
Publication
5161957-100
Revision 4
REV 4 5161957-100
• 本维修手册仅提供英文版本。
警告 • 如果维修服务提供商需要非英文版本,客户需自行提供翻译服务。
(ZH-CN)
• 未详细阅读和完全理解本维修手册之前,不得进行维修。
• 忽略本警告可能对维修人员,操作员或患者造成触电、机械伤害或其他形式的伤害。
a
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
b
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
c
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
• このサービスマニュアルには英語版しかありません。
• サービスを担当される業者が英語以外の言語を要求される場合、翻訳作業はその業
(JA) 者の責任で行うものとさせていただきます。
• このサービスマニュアルを熟読し理解せずに、装置のサービスを行わないでくださ
い。
• この警告に従わない場合、サービスを担当される方、操作員あるいは患者さんが、
感電や機械的又はその他の危険により負傷する可能性があります。
d
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
e
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
f
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
g
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
警告 • 本服務手冊僅提供英文版本。
(ZH-HK) • 倘若客戶的服務供應商需要英文以外之服務手冊,客戶有責任提供翻譯服務。
• 除非已參閱本服務手冊及明白其內容,否則切勿嘗試維修設備。
• 不遵從本警告或會令服務供應商、網絡供應商或病人受到觸電、機械性或其他
的危險。
警告 • 本維修手冊僅有英文版。
(ZH-TW) • 若客戶的維修廠商需要英文版以外的語言,應由客戶自行提供翻譯服務。
• 請勿試圖維修本設備,除非 您已查閱並瞭解本維修手冊。
• 若未留意本警告,可能導致維修廠商、操作員或病患因觸電、機械或其他危險
而受傷。
DAMAGE IN TRANSPORTATION
All packages should be closely examined at time of delivery. If damage is apparent write “Damage In Shipment” on ALL
copies of the freight or express bill BEFORE delivery is accepted or “signed for” by a GE representative or hospital receiving
agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event,
within 14 days after receipt, and the contents and containers held for inspection by the carrier. A transportation company
will not pay a claim for damage if an inspection is not requested within this 14 day period.
To file a report:
Fill out a report on http://egems.med.ge.com/edq/home.jsp
Contact the local service coordinator.
h
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Discard used batteries according to the manufacturer’s
instructions.
i
CT/e, ProSpeed AI/FI Series
CT/e, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
j
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
REVISION HISTORY
REV Date Primary Reason for Change
1 01/18/07 Initial release.
3 04/14/08 Added a note for software V/R2.00 is only for CTe systems (NPDAS).
4 03/03/10 Added four Languagewarnings for HongKong, Taiwan, Croatian and Slovenian.
Updated material list for Twin Linux. (Sec. 2)
Updated wiring diagram for Twin Linux PC865. (Sec. 2)
Updated upgrade procedure for the Host Video Cable replacement, DBPCI II Board replacement and BIOS setting. (Sec. 3)
Added information for rating plate attachment and product locator card delivery. (Sec. 4)
A
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
blank
B
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
TABLE OF CONTENTS
SECTION PAGE
i
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
ii
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 2 5161957-100
SECTION 1 - INTRODUCTION
1-1 PURPOSE
The O2 to Linux OC Upgrade Kit is intended to be used on the installed base of CT/e, ProSpeed AI/FI Series (O2
system) and CT/e Dual, ProSpeed AII/FII Series (O2 system) scanner. According to the following procedures the
O2 console can be upgraded to Linux console.
A steering guide is shown in Section 1-2.
The materials of the upgrade kit are listed in Section 2.
1-1
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 2 5161957-100
Upgrade Procedures
BIOS Setup
Install Software and Options
Configure System and Protocols
Full Calibrate System
1-2
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Table 2-1 Material List of Upgrade Kit for Single Slice (5166686)
ITEM PART NO. DESCRIPTION QTY.
2 2369472 PC Holder A 2
3 2369473 PC Holder B 2
4 2369474 Strap 2
5 N9408HR Screw 4
22 5144980 OS SW HP8200 1
ProSpeed, CT/e Xtreme Series SW V/
23 5196209* 1
R2.00
*: Software V/R2.00 (5196209) is ONLY for CTe Systems (NPDAS) where the O2 to Linux Computer Upgrade
has been performed. Do not upgrade software version for Be1 systems (CTe systems with MDAS and GDAS)
into this upgrade system.
2-1
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
2 2369472 PC Holder A 2
3 2369473 PC Holder B 2
4 2369474 Strap 2
5 N9408HR Screw 4
20 5126711 CTT 1.8.12 ,Prospeed II, cte dual Xtreme Series Core OS 1
21 5126713 Prospeed II, CTe Dual Xtreme Series Application Software VR4.00 1
2-2
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
2-3
CT/e, ProSpeed AI/FI Series
5161957-100
O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
CT/e Dual, ProSpeed AII/FII Series
THERMO CABLE1
0RQLWRU$*3*UDSKLFV
150
CARD
.H\ERDUG -
86%
- 133 3($.(5Z3$1(/
-
REAR CN1 w/PANEL
OC Wiring Diagram of Single Slice PC865 Linux System
- PERIPHERAL 40
3'8 - 134 135 136
-
J1
-
7*3WR*DQWU\ - FRONT PNL
-
% ([WVSHDNHU %
- -
ZLWK$PS 138
-
HDD
- SATA0
SATA
SATA0 SATA SYS/IMG
BRACKET
SATA1 SATA1
- SATA HDD
143
205 RAWDATA
-
Audio
SCSI-IDE
47 Adapter E-IDE
SCSI DVD-RAM
REAR CN2 w/PANEL
140 J13
& 0RXVH - - NPSC &
142 J14
(WKHUQHW - - 139
$8;6HULDO - - 147
152
$8;6HULDO - -
2-4
Security Key
$8;6HULDO - -
$8;6HULDO - -
$XGLRRXW
$XGLRLQ
6&6,
-
-
-
-
48 141
' '
BP CONTROLLER
SCSI CARD
Sound Card
6ODYH0RQLWRU - -
VSPL
DBPCI
CARD
49
0RQLWRU -
45
w/PANEL
DASIFN2
145
'$6 -
- 1 2 3 4 5 6 7
-
( PCI BACKPLANE (
1(67
9
&RQQHFWRU3DQHO
ᷛ䆄5(9 47< ᬍऩো)=1R ㅒᄫ0$'(%< ᮹ᳳ'$7( ᦣ 䗄'(6&5,37,21
ৡ ⿄
*(+:0(',&$/6<67(06 7,7/(
2&7DEOH$66<
Illustration 2-2
䆒䅵'(6,*1(5 ↨՟6&$/(
) ᅵḌ&+(&.(5
᭛ӊҷো'2&12 )
GE HEALTHCARE
ᅵ5(&+(&.(5
ᷛᅵ67$1'$5' 6&+
ᡍޚ$33529$/ 6KHHWRI
REV 4
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
2-5
CT/e, ProSpeed AI/FI Series
5161957-100
O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
CT/e Dual, ProSpeed AII/FII Series
THERMO CABLE1
0RQLWRU$*3*UDSKLFV
150
CARD
.H\ERDUG -
86%
- 133 3($.(5Z3$1(/
-
REAR CN1 w/PANEL
- PERIPHERAL 40
3'8 -
OC Wiring Diagram of Dual Slice PC865 Linux System
140 J13
0RXVH - - NPSC
& 142 154 J14 &
(WKHUQHW - - 139
$8;6HULDO - - 147
152
$8;6HULDO - -
2-6
Security Key
$8;6HULDO - -
$8;6HULDO - -
$XGLRRXW
$XGLRLQ
6&6,
-
-
-
-
-
-
-
-
-
48 141
BP CONTROLLER
' '
SCSI CARD
NPRS
NPRS
NPRS
NPRS
DBPCI2 (0)
Sound Card
6ODYH0RQLWRU - -
VSPL
NPRIF
CARD
49
ethernet
0RQLWRU -
NPRM
5
6
7
8
45
NPRS
NPRS
NPRS
NPRS
w/PANEL
DASIFN2
145
'$6 -
- 1 2 3 4 5 6 7
4
3
2
1
-
PCI BACKPLANE
( 153 (
1(67
9
&RQQHFWRU3DQHO
ᷛ䆄5(9 47< ᬍऩো)=1R ㅒᄫ0$'(%< ᮹ᳳ'$7( ᦣ 䗄'(6&5,37,21
Illustration 2-4
ৡ ⿄
*(+:0(',&$/6<67(06 7,7/(
2&7DEOH$66<
䆒䅵'(6,*1(5 ↨՟6&$/(
GE HEALTHCARE
) ᅵḌ&+(&.(5
᭛ӊҷো'2&12 )
ᅵ5(&+(&.(5 6&+
ᷛᅵ67$1'$5'
ᡍޚ$33529$/ 6KHHWRI
REV 4
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
NOTICE
Since Irix system state can not be restored to Linux system, so all the related information
(such as: options, configurations, protocols, etc...) should be written down in advance for
later reconfig.
All the Irix option keys should be prepared by Linux option keys, Irix 3D option has been re-
placed by Linux Volume Analysis option, for other detailed information, please contact ap-
plication specialist and sales people.
Entire upgrade time needs 8 hours, this is up to different engineers.
3-1 PREPARATION
1. Verify that the contents of this upgrade kit are correct according to the Material List (see Section 2).
2. Save Patient Images.
3. Record camera data (for the system with camera only).
4. Record Options Information.
a. On the desktop menu, click on List Option button located on the upper right of the screen.
Option list will appear.
b. Click on the current Irix system “Installed option” and check if the corresponding Linux option keys are ready
on hand.
c. Click Quit to return to the desktop menu.
5. Write down all the configuration and protocols information for later use.
6. Click on Shutdown on the desktop menu.
7. Few seconds later, the message “Okay to power off the system now. Press any key to restart.” appears.
8. Press the Power button on Front of OC to power off.
3-1
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
WARNING
THE ELECTRICAL SHOCK HAZARD!
IF THE SYSTEM HAS UPS ASSY, MAKE SURE YOU TURN OFF THE UPS POWER BEFORE
YOU ACCESS THE OPERATOR CONSOLE.
CAUTION
FOLLOW ALL ELECTRO-STATIC DISCHARGE PROCEDURES. ALWAYS USE ESD WRIST
STRAP AND GROUNDING CORDS. THE USE OF A GROUND MONITOR IS SUGGESTED.
3-2
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
SCSI Bay
ple
xam
E SCSI Dust Cover
SCSI Bay
OC Host Cover
OC Host Cover Screws (x6)
3-3
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Screws (x2)
SCSI
Cable
Host
Video Power Cable
Ethernet
Serial
(x2)
Bit3 Cable
3-4
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Audio
Connectors
Host PC Support
Screws (x2)
Host PC
Support
8. Install four PC holders and two straps to the new Host PC Support (2369471-2). (Illustration 3-4)
9. Place the Host PC865 (5189991) on the Host PC Support, fasten the four PC holders and tighten the two straps
to fix the Host PC865.
Strap (x2)
3-5
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Serial 2 Ethernet
Mouse
Host Video
Keyboard (VGA)
NOTICE
For Twin Linux System: Replace the Video Cable (2156297-2, Host PC VGA <-> VSPL) with
the new Video Cable (2304737-2, Host PC DVI <-> VSPL).
3-6
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Power Cable
Note: Connect the SATA Cable and Power Cable connectors to the front
panel of the Host Computer by fastening tightly screws.
3-7
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Signal Cable
Blank connector
C5 C7
F1
J1
J
F2
F 8
J 2
13
F3
14
J 3
F4 TH3
J 4
F5
J 5
F6
J
J
J 6
F 9
F 7
17
16
J 7
Signal Cable
(to Peripheral Assy J 8
J9 J10
, J13)
TH4
HDD Cable (to Raw HDD SCSI Cable (to SCSI Card, 2249079_J16)
, 2242275_J17)
3-8
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
SCSI Card
J5
J2
J1
8. Check the jumper setting of the SCSI DVD-RAM Drive if ID set as 1. (Illustration 3-11)
9. Respectively connect the two Power Cable connectors to the DVD-RAM Drive and the Adapter.
JP2 (disable)
(remove the block)
Power Cable
for Adapter
ID=1
Power Cable
for DVD-RAM Drive
10. Install the SCSI DVD-RAM Drive to the Peripheral Assy of the OC by screwing the DVD-RAM mounting screws.
11. Connect the SCSI Signal Cable and Power Cable to the SCSI DVD-RAM Drive.
12. Install the two new HDDs to the Peripheral Assy of the OC by screwing the HDD mounting screws.
13. Connect the Signal Cables and Power Cables to the HDDs according to Table 3-1.
IMPORTANT NOTE: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
When connect the SATA Cables, be sure that the upper HDD is connected to the upper con-
nector (SATA 0). Otherwise System Disk and Image Disk may be mixed up during next HDD
replacement and software loading will result in losing image.
------------------------------------------------------------------------
3-9
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
7 DBPCI v v v v
8 (down) NPRIF v v v
Left View
1 2 3 4
Screw (x2)
c. Remove the Serial Panel Assy (2265429) by unscrewing its two screws. (See Illustration 3-12)
3-10
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Power Cable
NPRIF NPRM
NPR Cable (X2) Ground Cable
3-11
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Audio Card
Multi-port
Serial Card
SCSI Card
BP Controller
Card
DBPCI
3-12
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Rear Fan
(x2)
RearCN1
DASIFN
RearCN2
FRONT PANEL
Speaker
J13
J5
J12
Serial 4
Serial #3
J12
J6
Serial 2
J9
J4
TGP
J14
Serial 3
Serial #2
J8
J11
J5
Serial 1
OUT
J7
J3
J6
Serial 2
IN
Serial #1
J10
J4
PDU
J15
Serial 1
Serial #0
PWR
J2
J9
J3
FOOT-SW
J16
Ethernet
Ethernet
J8
J2
KEYBOARD
DBPCI
J1
J17
Mouse
Mouse
J7
J1
3-13
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Out
In
11. Connect the Multi-port Serial Cable (5159503) according to the labels on the cable connectors.
4-Ports Serial Cable Connect to
5159503 Multi-port Serial Card
S1 to RearCN2 S1 modem RearCN2 J3
S2 to RearCN1 J4 RearCN1 J4, TGP
S3 to Front Panel Empty
S4 to skey Service Key
12. Install the Rear CN1 Panel Assy by screwing its two screws.
3-14
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Audio Card
Serial Card
SCSI Card
BP Card
DBPCI
NPRIF
NPRM
6. Disconnect the cable connectors from two DBPCIs (J2 and J3).
7. Unscrew the screws on the DBPCI board bracket.
8. Remove the DBPCI Assy from the PCI backplane.
9. Insert the new DBPCI II Assy to the PCI backplane, slowly pushing the board, until it reaches the backplane.
10. Secure the DBPCI II Assy by using its screws.
11. Unscrew the two screws on the Rear CN1 Panel, and slide the Rear CN1 Panel Assy out of the Connector
Panel Assy. (Illustration 3-16)
12. Disconnect the Audio Cables (In/Out) from the J6 and J7 of the Rear CN1.
3-15
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
15. Connect the Multi-port Serial Cable (5159503) according to the labels on the cable connectors.
4-Ports Serial Cable Connect to
5159503 Multi-port Serial Card
S1 to RearCN2 S1 modem RearCN2 J3
S2 to RearCN1 J4 RearCN1 J4, TGP
S3 to Front Panel Empty
S4 to skey Service Key
NOTICE
Please pay attention to the connection position of the cables. (Refer to Illustration 3-20)
DBPCI2 1
DBPCI 1 DBPCI2 0
DBPCI 0
J2
J3
DBPCI2 #1, J2 DASIFN, J2 (2249713)
J2 DBPCI2 #1, J3 RearCN1, J1 (2156308-2)
J3 DBPCI2 #0, J2 DASIFN, J9 (2319300)
3-16
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
AIR FLOW
AIR FLOW
3-17
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
For 5” MOD
For DVD-RAM
Shield Board
3-18
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
3-19
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
3-20
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
3-21
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
Detail installation procedure refer to Function Check/Adjustment -> System -> Software Loading.
After OS started, click Reconfig -> Hardware Setting, Select DVD-RAM as State Storage Type. (Click DVD-RAM
twice to make sure it is selected.)
e
pl
am
Ex
3-12 FINALIZATION
Perform a test scan and verify that the image is normal.
3-22
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
REV 4 5161957-100
4-1
CT/e, ProSpeed AI/FI Series
CT/e Dual, ProSpeed AII/FII Series
GE HEALTHCARE O2 PC TO LINUX PC865 UPGRADE INSTRUCTION
blank
4-2
www.gehealthcare.com
Imagination at work