Professional Documents
Culture Documents
NRP : 7727288189
Prodi : D4 DC
JOB SHEET 1
--------------------------------------------------------------------------------------------------------------------------
c. Kapasitas Kapal
5) Fungsi Kapal
RENCANA GARIS
--------------------------------------------------------------------------------------------------------------------------
JOB SHEET 3
--------------------------------------------------------------------------------------------------------------------------
RESISTANCE VS POWER
RENCANA UMUM
--------------------------------------------------------------------------------------------------------------------------
JOB SHEET 5
SPESIFICATION TECHNIC
--------------------------------------------------------------------------------------------------------------------------
SHORT SPECIFICATION
1.0 General
The vessel shall be constructed with one continuous deck with a double bottom in way of
machinery space and subdivided by transverse and longitudinal bulkheads as shown on the
General Arrangement Plan. The vessel shall have a main deck accommodation area, a raised
forecastle deck consisting of one tier of accommodation, a deckhouse with one tier of
accommodation and a raised navigation bridge deck.
The ship shall be equipped with two high speed light duty marine engines c/w water jet propellers.
2.0 Classification
The Vessel shall be classed by BKI and IACS Class for international voyages and to their special
survey to hull and machinery with notation
The Vessel shall be designed and built in accordance to Classification society's requirements and be
registered in Jakarta, Indonesia. All other applicable rules and requirements enforced at the date of
Agreement by the Government of the Country of Registry, Indonesia.
Speed :
Min. 12.0 knots with vessel loaded to design draft in a water depth of at least 2 times the vessel
design draft and engine developing 100% MCR.
5.0 Capacity
6.0 Deadweight
The vessel shall be built of aluminum of marine grade according to Classification society
requirement. The structural work shall be executed in accordance with the Builder's standard
practice approved by the Classification Society.
The vessel to be of all welded construction. Welding of frames, beams and stiffeners throughout the
bilge and tanks to be continuous, otherwise intermittent welding in accordance with Classification
requirements. External stiffeners exposed to the weather to be continuously welded.
9.0 Painting
Before fabrication, all plates/profiles to be grit blasted to SA 2.5 and apply one(1) coat of inorganic
zinc silicate shop primer.
Painting schedule :
Outside shell chlorinated rubber type paint Sweep blast 300 microns
Outside of super chlorinated rubber type paint Sweep blast 100 microns
structure
Industrial Type Split type Air Conditioning to be fitted to serve accommodation, galley (spot
cooling), wheelhouse and all living spaces within accommodation area.
Ventilation:
- Natural exhaust.
A dry provision store to be arranged near to galley and fitted with removable galvanised steel
shelves with portable retaining battens.
30mm/OD x 75 M x 2 Set
a) Gyrocompass 1 unit
b) Magnetic Compass 1 unit
c) Radar 1 unit
d) Echo Sounder 1 unit
e) VHF Radio Telephone 2 units
f) SART 1 unit
g) GPS Navigator 1 unit
h) SSB Radio/telephone 1 unit
i) PA system 1 unit
j) 500 w Floodlight 2 unit
NILAI
TUGAS 2
NRP 31 4.8
NRP 32 -
NRP 33 3.5
NRP 34 1
NPP 35 0
NRP 36 3.5
NRP 37 4
NRP 38 3
NRP 39 4.5
NRP 40 4
NRP 41 3
NRP 42 4.5
NRP 43 2
NRP 44 -
NRP 45 4.5
NRP 46 -
NRP 47 3.5
NRP 48 5
NRP 49 -
NRP 50 -
NRP 51 -
NRP 52 0
NRP 53 2.5
NRP 54 -
NRP 55 -
NRP 56 -
NRP 57 4
NRP 58 -
NRP 59 4.5