Professional Documents
Culture Documents
AI=artificial intelligence.
01 02 03 04
PREPARE ADD COMPLETE ADD
CYTOLOGY SLIDE NEW TEST PATIENT HISTORY SAMPLE SITES
• Prepare a cytology • Log in to • Enter the patient’s species, • Select ADD FLUID
slide using industry VETSCAN IMAGYST breed, age and gender or ADD LESION
best practices
• Choose the correct • Include a brief clinical • Enter the required
• Include a label or sample and select history information
handwritten note on START. Sample
• Select CREATE
the slide information will come
prepopulated from • You may create up to
• Keep the slides
any FUSE-connected 2 different sample sites
together and well
software system • Select a sample card
organized
• If no integration is to open and edit a
available, select sample site
Add New Test (+) • To remove a sample site,
• Enter all required open sample site card
information and then and select DELETE ( )
select CREATE
• Select ADD A SCAN • Select PREVIEW and • To assist the pathologist • When a test is ready
or SCANS to open the review the suggested with their diagnosis, attach to be reviewed, select
scan window scan area any history documents READY FOR REVIEW
• Select an available • Accept the suggested (.pdf) or photos (.jpeg) • Find the desired test
scanner scan area or create a • Select SUBMIT ORDER and select REVIEW
• Select OPEN TRAY and custom scan area to
• Review the findings
place cytology slide on reduce the scan time.
the tray, locking it in Select CONTINUE when • The test will move to
place you are satisfied with the TEST HISTORY
scan area
• You may scan 2 slides
per sample site
• Select DELETE (X) to
remove a scan
01 02 03
CHECKLIST COLLECT PREPARE ADD SAMPLE
FECAL MATTER FECAL SAMPLE TO SLIDE
Ensure you have the
following materials
ready to run a test:
• Unscrew the tube cap • Shake the tubes and • Place slide in the slide
from the collection tube then place them in a template with the name or
ParaPro Sample ParaPro Collection centrifuge barcode toward the top
• Add 1 scoop, about 1 g,
Tube + Scoop Tube + Cap
of fecal matter to the • Spin the sample for 2 • Pull material from the top
collection tube minutes at 500 RCF of the sample tube using
the transfer loop
• Use stir stick to remove • Unscrew the collection
the matter from the tube with the scoop • Place 2-4 loops of fecal
scoop and mix it with and discard matter around the edge
prefilled solution of the target circle on
Centrifuge Scanner • Lay the sample tube in
the slide
• Screw the sample tube a tray
onto the collection tube
• Continue twisting until
the tubes are firmly
screwed together
Slide Template
04 05 06 07
PLACE INITIATE LOAD REVIEW
COVERSLIP TEST AND SCAN SLIDE SCAN
• Place the coverslip, with • Choose correct sample • Unlock the slide holder • Open the sample
“IMAGYST,” readable and select SCAN; sample and place the slide (with results, review any
in the lower left-hand information will come coverslip) on the slide captured images and
corner, onto the slide prepopulated from tray select examples for
over the targeted area any FUSE-connected inclusion in the report
• Place any label or writing
of the slide template software system
toward the right side of • Add any comments and
• If no integration is the slide tray and lock the select FINALIZE
available, select ADD slide holder
• Select VIEW REPORT
SAMPLE, enter the
• Select SCAN SLIDE to view a shareable
sample information,
PDF or review results
select CREATE and then
in a FUSE-connected
select SCAN
software system
• Select a scanner, and
make sure the tray is
open (select OPEN
TRAY if necessary)
01 PREPARE 02 03 04 ADD
ADD COMPLETE
BLOOD SMEAR NEW TEST PATIENT HISTORY SCANS
• Prepare a blood smear • Log in to • Enter the RBC count from • Select an available scanner
slide with a Romanowsky- VETSCAN IMAGYST the automated CBC report. • Select OPEN TRAY and
type stain using industry This is important to ensure place blood smear slide on
• Choose the correct sample
best practices the polychromatophils are the tray, locking it in place
and select SCAN. Sample
analyzed correctly
• Include a label or information will come
handwritten note on prepopulated from any
the slide to identify FUSE-connected software
the patient system
• See additional details on • If no integration is available,
subsequent pages select Add Test (+)
• Enter all required
information and then
select CREATE
• Select PREVIEW and • Select SUBMIT ORDER • When a test is ready • Select Add New Test
review the suggested to be reviewed, select (+) to submit image
scan area READY FOR REVIEW for expert review by a
clinical pathologist
• Accept the suggested • Find the desired test
scan area or create a and select REVIEW • Choose the sample that
custom scan area to needs to be reviewed
• Review the findings
reduce the scan time. • To assist the
Select CONTINUE when • Click on FINALIZE and pathologist with their
you are satisfied with the test will move to diagnosis, attach
the scan area TEST HISTORY history documents
• Select DELETE (X) (.pdf) or photos (.jpeg)
to remove a scan • Find the desired test
and select REVIEW*
All trademarks are the property of Zoetis Services LLC or a related company or a licensor unless otherwise noted.
© 2022 Zoetis Services LLC. All rights reserved. VTS-00478R1