Professional Documents
Culture Documents
Hardware Description
Issue 03
Date 2020-10-10
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: support@huawei.com
Contents
Overview
The BTS5900L cabinet applies to the BTS5900L base station. BTS5900L Hardware
Description mainly describes the exterior, configurations, and engineering
specifications of the cabinet.
The RF modules for distributed base stations in this document include RRUs and
AAUs. The application scenarios, power distribution schemes, cable connections,
and cable installation of the RRUs and AAUs are the same. The following uses the
RRUs as an example.
The exteriors of components or cables in this document are for reference only. The
actual exteriors may be different.
NOTE
● Unless otherwise specified, in this document, LTE and eNodeB always include FDD, NB-IoT,
and TDD. In scenarios where they need to be distinguished, LTE FDD, LTE NB-IoT, and LTE
TDD are used. The same rules apply to eNodeB.
● Unless otherwise specified, in this document, NR and gNodeB always include FDD and TDD.
In scenarios where they need to be distinguished, NR FDD and NR TDD are used. The same
rules apply to gNodeB.
● In this document, "G" is short for GSM, "U" for UMTS, "L" for LTE FDD, "T" for LTE TDD, "M"
for LTE NB-IoT, and "N" for NR. In addition, "N (FDD)" is short for NR FDD and "N (TDD)" is
short for NR TDD.
● For details about the LampSite solution, see LampSite Base Station Hardware Description.
● For details about the power requirements and power distribution schemes of the BTS5900L
cabinet, see corresponding "Power Requirements" and "Power Distribution Schemes"
sections in base station model sections.
Product Versions
The following table lists the product versions related to this document.
3900 series base stations SRAN8.0 and later V100R008C00 and later
Intended Audience
This document is intended for:
● System engineers
● Base station installation engineers
● Site maintenance engineers
Organization
1.1 Changes in BTS5900L Hardware Description
This section describes the changes in BTS5900L Hardware Description.
1.2 Exterior of a BTS5900L Cabinet
The BTS5900L cabinet is a vertical cabinet and its design complies with the IEC297
standard.
1.3 Components in a BTS5900L Cabinet
This section describes module and board configurations in a BTS5900L cabinet.
1.4 Engineering Specifications of Cabinets for BTS5900L Base Stations
Engineering specifications of the BTS5900L (Ver.A)/BTS3900L (Ver.E_B~D) cabinets
for BTS5900L base stations include input power specifications, equipment
specifications, environmental specifications, and surge protection specifications.
03 (2020-10-10)
This is the third commercial release.
Compared with Issue 02 (2020-07-31), this issue does not include any new topics
or exclude any topics.
Compared with Issue 02 (2020-07-31), this issue includes the following changes.
02 (2020-07-31)
This is the second commercial release.
Compared with Issue 01 (2020-01-20), this issue does not include any new topics
or exclude any topics.
Compared with Issue 01 (2020-01-20), this issue includes the following changes.
01 (2020-01-20)
This is the first commercial release.
This document is separated from the 3900 & 5900 Series Base Station Hardware
Description document and its content derives from the section "BTS5900L Cabinet
Description."
Compared with the section "BTS5900L Cabinet Description" in 3900 & 5900 Series
Base Station Hardware Description of Issue 18 (2019-03-25), this issue does not
include any new topics or changes, or exclude any topics.
Exterior
The following figure shows the exterior of a BTS5900L (Ver.A) cabinet.
Dimensions
The following figure shows the dimensions of a BTS5900L (Ver.A) cabinet.
NOTE
For the requirements for circuit breakers on customer equipment and cross-sectional areas
of power cables in a BTS5900L base station, see Power Requirements of a BTS5900L in 3900
& 5900 Series Base Station Hardware Description.
Equipment Specifications
The following table lists the equipment specifications of a BTS5900L (Ver.A)
cabinet.
Item Specifications
Environmental Specifications
The following table lists the environmental specifications of a BTS5900L (Ver.A)/
BTS3900L (Ver.E_B~D) cabinet.
Item Specifications/Standard
a: Short-term operation indicates that a base station does not work for over 15
days within a year or that a base station does not continuously work for over 72
hours.
b: Regarding the storage environment:
● The validity period is one year.
● The product can function properly within the validity period if the storage
environment meets the preceding standards.
NOTE
● Unless otherwise specified, the surge protection specifications depend on the surge
waveform of 8/20 μs.
● All the surge current items, unless otherwise specified as Maximum discharge current, refer
to Nominal discharge current.
Item Specifications
Compliance Standards
The following table lists the compliance standards for a cabinet.
Item Standard
Security ● X.509
standard ● RFC 1825
s
● RFC 1826
● RFC 1827
● RFC 4492
● RFC 5246
● SSL
Item Standard
Ingress IP20
protectio
n rating
Shockpro IEC 60068-2-57: Environmental testing - Part 2-57: Tests - Test Ff:
of Vibration - Time-history method
protectio YD5083: Interim Provisions for Test of Anti-seismic Performances of
n Telecommunications Equipment (telecom industry standard in
People's Republic of China)
Item Standard
Item Standard
Item Standard
● FCC PART15
● GB 9254
● 3GPP TS 25.113
● ETSI EN 301 908-1
● ITU-R SM 329-12
An eNodeB has been certified by European standards and complies
with the following standards:
● EMC Directive 2014/30/EU
● RED Directive 2014/53/EU
● ETSI EN 301489-1
● ETSI EN 301489-50
● CISPR 32
● EN 55032
● CISPR 24
● EN 55024
● FCC PART15
● GB 9254
● 3GPP TS 25.113
● ETSI EN 301 908-1
● ITU-R SM 329-12
Item Standard