Professional Documents
Culture Documents
Royale Glitz
Royale Glitz Luxury Emulsion is an Ultra Sheen interior paint which provides a rich luxurious finish to your walls.
It also offers unmatched stain repellency to keep the walls beautiful
PRODUCT BENEFITS
Luxury with TeflonTM Royale Designer Palette
Royale Glitz provides best of both the worlds of Décor Royale range of products have an exclusive designer
and Performance. It has Teflon surface protector which Palette of 35 shades curated by the fashion legend
makes it extremely durable and toughest household Sabyasachi Mukherjee. The shades are inspired by the
stains can be cleaned easily and on the other hand colours of India's floral splendor, heritage architecture WATER BASED
It has luxurious Ultra Sheen finish which is unmatched. and antique Textiles.
Ultra - Sheen Finish Green Assure
Ultra - Sheen Finish offers enhanced radiance on the wall The promise of Green Assure from Asian Paints, implies
making your home look luxurious with rich finish. that this product conforms to strict international
environmental and safety standards. Low VOC standards
Stain Repellent and the absence of any harmful chemical results in very
Royale Glitz helps in repelling the household stains on
* All Asian Paints products contain no added
PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE
MEDIUM
HIGH
2200*
**Currently available in 2200 shades as 1 COAT
per the Asian Paints Colour Cosmos.
LOW
260 – 280
sq.ft/ltr**
AVAILABLE PACKS FINISH
2 COATS
LOW SHEEN HIGH SHEEN ULTRA SHEEN GLOSS 140 – 160
sq.ft/ltr**
SMOOTH
1 ltr 4 ltr 10 ltr 20 ltr
3 years shelf life from date of manufacture in original tightly Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive to factors such as method and condition of application and
heat. Diluted paints to be used within 12 hours” surface roughness and porosity.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
PLASTER New masonry surfaces VISCOSITY1 PERIOD
must be allowed to cure completely.
STEP 1
It is recommended to allow 28 days SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
as the curing time for new masonry
surfaces. STEP 2
ROYALE WALL BRUSH/ROLLER 8 - 10
CLEANING Surface should be free BRUSH/ROLLER 40 - 50
BASECOAT 0025 WATER SPRAY 15 - 20 4 - 6 HRS
from any loose paint, dust or grease. SPRAY 20 - 25
BRUSH / ROLLER / SPRAY 40% – 50%
Growths of fungus, algae or moss
should be removed by wire brushing STEP 3
ACRYLIC WALL PUTTY BASED ON
and water. In case of areas having PUTTY KNIFE 1354 WATER N/A 4 - 6 HRS
REQUIREMENT
excessive dampness use Asian
Paints DampBlock to limit further STEP 4
dampness. When the underlying SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
surface exhibits chalkiness, in spite of
STEP 5
thorough surface cleaning, use Asian ROYALE WALL
Paints Exterior Sealer. BASECOAT BRUSH/ROLLER 8 - 10 BRUSH/ROLLER 40 - 50
0025 WATER 4 - 6 HRS
BRUSH / SPRAY / ROLLER SPRAY 15 - 20 SPRAY 20 - 25
FILLING FOR CRACKS For filling 40% – 50%
cracks upto 3mm use Asian Paints STEP 6
SmartCare Exterior Sealer. SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
FILLING FOR HOLES & DENTS STEP 7
Use Asian Paints Acrylic Wall Putty FIRST COAT BRUSH + ROLLER 30 - 35 % BRUSH + ROLLER 40 - 50
or white cement and fine sand in the ROYALE GLITZ 1A29 WATER FELT ROLLER 25 - 30 % FELT ROLLER 60 - 70 4 - 6 HRS
AIRLESS SPRAY 10 - 20 % AIRLESS SPRAY 80 - 100
ROLLER / SPRAY
ratio 1:3.
STEP 8 BRUSH + ROLLER 30 - 35 % BRUSH + ROLLER 40 - 50
For interior surfaces or substrates SECOND COAT 1A29 WATER FELT ROLLER 25 - 30 % FELT ROLLER 60 - 70 4 - 6 HRS
that are subjected to continuous ROYALE GLITZ AIRLESS SPRAY 10 - 20 % AIRLESS SPRAY 80 - 100
seepage or dampness, kindly ROLLER / SPRAY 1. As measured through a Ford cup. 2. Recoat period is quoted for 30°C and 50 - 60% Relative Humidity, these may
use Asian Paints SmartCare vary under different conditions. 3. Provide adequate ventilation for application and drying. 4. Do not apply Royale Glitz
Damp Block before the top coat if humidity is greater than 90%. It may cause prolonged drying time of paint and moisture condensation on the walls.
application.
Finishes for Interior Walls
*These shades are for reference only. Please refer to the Colour Cosmos or Colour Palette for correct shade reference
ADDITIONAL INFORMATION
> Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
this level within 4 hrs of application.
> Do not over-thin or over-extend the brush.
> Tint using Asian Paints machine colourants only
> Stir well and strain before use.
Asian Paints Royale Glitz Luxury emulsion meets the LEEDS
VOC criteria as per Indian Green Building Council version 1.0
> Tinted paints need thorough shaking immediately after tinter addition as well as before use.
as tested at Shriram Institute for Industrial Research.
TECHNICAL DETAILS
Version No. VN01/01/2021. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India