Professional Documents
Culture Documents
LG165C specification-50HZ
LG165C specification-50HZ
GENERATOR SETS
LG165C 50Hz
ENGINE BRAND
Engine model 6BTAA5.9-G12
Engine Characters Water-cooled, 6 cylinders in line, 4-cycle, direct injection
1
The maximum output(kW) 155
Aspiration Turbocharged and Charge air cooled
Bore(mm)×Stroke (mm) 102X120
Compression ration 17.3:1
Fuel consumption(L/H) 34(100% load)
Displacement(Liters) 5.9
Intake air flow(L/sec) 150
Exhaust flow(L/sec) 357
Exhaust highest temperature 507℃
Lube-oil capacity(L) 16.4
Cooling water capacity(L) 10 Liters(Engine Only)
Voltage for start(V) 24
Instrument for adjusting speed Electronically
ALTERNATOR
ALTERNATOR BRAND
Alternator model UCI274F
Excitation Brushless, Self-excited
Insulation class H
Protection class IP23
Connection type Re-connectable
Voltage Regulation ≤1.0%
Waveform Distortion No load<1.5% and non-distorting balanced linear load<5%
THF/TIF <2%/50
GENERATING SET CONTROL SYSTEM
2
Item Standard Optional
Air Inlet Heavy duty Air Cleaner Air pre-heater
system
Radiator with guard sized for Radiator duct flange
Cooling 50ºC Remote Radiator cooling
system Coolant drain line with valve Low Coolant Level shut
Fan and belt guards down sensor
Industrial exhaust muffler for Residential 35dBA muffler
Exhaust open type Manifold and turbocharger guards
system Residential exhaust muffler
for silent type
Manual transfer panel,
Automatic transfer Panel,
Control Deep Sea 7320 control panel
Fully Automatic Synchronizing
system with
AMF function and load Sharing Panel,
Manual Synchronizing Panel.
Class H insulation Oversize and premium generators
Alternator Automatic Voltage Regulator Three phase sensing
& Breaker IP23 Protection Space heater
ABB brand circuit breaker PMG
Lubricating oil filter Manual sump pump
Lube
Oil drain with valves Lubricant oil pre-heater
system
Lube oil pressure indicator
Fuel filter Dual Wall Integral Fuel Tanks
Fuel 8 hours base fame fuel tank Dual Wall Sub-base Fuel Tanks
system Fuel level shut down sensor Automatic Fuel Fill Options
In line with our policy of continuous product development, we reserve our right to
change the above specifications without notice.