Professional Documents
Culture Documents
These TÜVIS-Prüfgrundlagen provide a tool for experts. The documents contain the relevant regulations.
Interpretations and explanations developed by technical committees are included. Please consider that the
individual documents differ with regard to their mandatory application. VdTÜV has taken all reasonable measures to
ensure the accuracy of this translation but regrets that no responsibility can be accepted for any error, omission or
inaccuracy. In cases of doubt or dispute, the latest edition of the German text only is valid.
The AD 2000-Merkblätter are prepared by the seven associations listed below who together form the “Arbeitsgemeinschaft Druck-
behälter” (AD). The structure and the application of the AD 2000 Code and the procedural guidelines are covered by AD 2000-Merk-
blatt G 1.
The AD 2000-Merkblätter contain safety requirements to be met under normal operating conditions. If above-normal loadings are to be
expected during the operation of the pressure vessel, this shall be taken into account by meeting special requirements.
If there are any divergences from the requirements of this AD 2000-Merkblatt, it shall be possible to prove that the standard of safety of
this Code has been maintained by other means, e.g. by materials testing, tests, stress analysis, operating experience.
FDBR e. V. Fachverband Anlagenbau, Düsseldorf
Deutsche Gesetzliche Unfallversicherung (DGUV), Berlin
Verband der Chemischen Industrie e. V. (VCI), Frankfurt/Main
Verband Deutscher Maschinen- und Anlagenbau e. V. (VDMA), Fachgemeinschaft Verfahrenstechnische Maschinen
und Apparate, Frankfurt/Main
Stahlinstitut VDEh, Düsseldorf
AD 2000-Merkblatt
Contents
Page
Preface .............................................................................................................. 2
1 DIN Standards ........................................................................................... 2
2 DIN EN Standards ................................................................................... 34
3 DIN EN ISO Standards ............................................................................ 54
4 DIN ISO Standards .................................................................................. 59
5 CR ISO Standards ................................................................................... 60
6 EN Standards .......................................................................................... 60
7 EN ISO Standards ................................................................................... 62
8 ISO Standards ......................................................................................... 62
9 DIN VDE Standards/DIN VDI Directives .................................................. 63
10 VDMA Standards ..................................................................................... 63
Preface
Subclause 3.2 of AD 2000-Merkblatt G 1 states that the AD 2000-Merkblätter are based to a large extent on standards. In
the following, all the standards which are quoted in the AD 2000 Code as of April 2015, are listed with edition date. The list
will be regularly updated.
If a listed standard is withdrawn or superseded, a reference to the superseding document will be given in this Merkblatt.
The standard referred to in an AD 2000-Merkblatt shall be applied until the superseding standard is referred to in the
corresponding AD 2000-Merkblatt. The superseding document will be referred to in the subsequent regular update of
AD 2000-Merkblatt G 2 with edition date and reference (Merkblatt/subclause).
1 DIN Standards
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
13-28 S 3/0 2007-11 4.3.2.3 ISO Metric Screw Threads; Coarse and Fine Screw Threads 1975-09
from 1 to 250 mm Screw Thread Diameter; Root Cross-
sections, Tensile Stress Cross-sections and Pitch Angles
267-13 W7 2008-05 2.2, 2.3, 3.1, Fasteners – Technical specifications – Part 13: Parts for bolted 2007-05
4.1.2, 5.1 connections with specific mechanical properties for use at
temperatures ranging from 200 °C to 700 °C
AD 2000-Merkblatt
1055-3 S 3/0 2007-11 4.1.4.5 Action on structures – Part 3: Self-weight and imposed load 2006-03
in building
SUPERSEDING DOCUMENT:
DIN EN 1991-1-1 + NA (2010-12)
Eurocode 1: Actions on structures – Part 1-1: General actions –
Densities, self-weight, imposed loads for buildings
National Annex – Nationally determined parameters –
Eurocode 1: Actions on structures – Part 1-1: General actions –
Densities, self-weight, imposed loads for buildings
1055-4 S 3/0 2007-11 4.1.4.6 Action on structures – Part 4: Wind loads 2005-03
SUPERSEDING DOCUMENT:
DIN EN 1991-1-4 + NA (2010-12)
Eurocode 1: Actions on structures – Part 1-4: General actions –
Wind actions
National Annex – Nationally determined parameters –
Eurocode 1: Actions on structures – Part 1-4: General actions –
Wind actions
1055-5 S 3/0 2007-11 4.1.4.8 Actions on structures – Part 5: Snowloads and ice loads 2005-07
SUPERSEDING DOCUMENT:
DIN EN 1991-1-3 + NA (2010-12)
Eurocode 1: Actions on structures – Part 1-3: General actions –
Snow loads
National Annex – Nationally determined parameters –
Eurocode 1: Actions on structures – Part 1-3: General actions –
Snow loads
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
1626 W4 2008-05 2.2.1, Welded circular unalloyed steel tubes subject to special 1984-10
7.2.1, requirements; Technical delivery conditions
Table 2a,
Table 2b, SUPERSEDING DOCUMENT:
Table 3, DIN EN ISO 3183 (2013-03)
Annex 1 Petroleum and natural gas industries – Steel pipe for pipeline
transportation systems
DIN EN 10217-1 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 1: Non-alloy steel tubes with specified room
temperature properties
DIN EN 10224 (2005-12)
Non-alloy steel tubes and fittings for the conveyance of water
and other aqueous liquids – Technical delivery conditions
DIN EN 10296-1 (2004-02)
Welded circular steel tubes for mechanical and general
engineering purposes – Technical delivery conditions – Part 1:
Non-alloy and alloy steel tubes
1628 W4 2008-05 2.2.2, High performance welded circular unalloyed steel tubes; 1984-10
7.2.2, Technical delivery conditions
AD 2000-Merkblatt
Table 2a,
Table 2b, SUPERSEDING DOCUMENT:
Table 3 DIN EN 10217-1 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 1: Non-alloy steel tubes with specified room
temperature properties
DIN EN 10296-1 (2004-02)
Welded circular steel tubes for mechanical and general
engineering purposes – Technical delivery conditions –
Part 1: Non-alloy and alloy steel tubes
1629 HP 801 2002-05 3.1.2.1 Seamless circular unalloyed steel tubes subject to special 1984-10
No. 34 requirements; Technical delivery conditions
W4 2008-05 2.1.1,
7.1.1, SUPERSEDING DOCUMENT:
Table 1a, DIN EN ISO 3183 (2013-03)
Table 1b, Petroleum and natural gas industries – Steel pipe for pipeline
Table 3 transportation systems
W 12 2003-07 2.1.1,
Table 1, DIN EN 10216-1 (2014-03)
Table 3 Seamless steel tubes for pressure purposes – Technical
delivery conditions – Part 1: Non-alloy steel tubes with specified
room temperature properties
DIN EN 10217-1 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 1: Non-alloy steel tubes with specified room
temperature properties
DIN EN 10224 (2005-12)
Non-alloy steel tubes and fittings for the conveyance of water
and other aqueous liquids – Technical delivery conditions
DIN EN 10297-1 (2003-06)
Seamless circular steel tubes for mechanical and general
engineering purposes – Technical delivery conditions –
Part 1: Non-alloy and alloy steel tubes
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
1630 HP 100 R 2007-11 5.2.1.1 High performance seamless circular unalloyed steel tubes; 1984-10
W4 2008-05 2.1.2, Technical delivery conditions
7.1.3,
Table 1a, WITHDRAWN WITHOUT REPLACEMENT
Table 1b,
Table 3
W 12 2003-07 2.1.2,
Table 1,
Table 3
1681 HP 801 2002-05 3.1.4 Cast steels for general engineering purposes; 1985-06
No. 34 Technical delivery conditions
SUPERSEDING DOCUMENT:
DIN EN 10293 (2005-06)
Steel castings for general engineering uses
1690-1 W0 2006-07 3.5 Technical delivery conditions for castings made from metallic 1985-05
W 3/1 2000-10 4.1 materials; General conditions
W 3/2 2000-10 4.1
SUPERSEDING DOCUMENT:
DIN EN 1559-1 (2011-05)
AD 2000-Merkblatt
Founding – Technical conditions of delivery – Part 1: General
1690-10 S1 2005-02 Annex 3 Technical delivery conditions for castings of metallic materials; 1991-01
S2 2010-11 Annex 5, 1.3, Supplementary requirements for steel castings used for heavy-
8.2.1, duty valves
8.2.2
WITHDRAWN WITHOUT REPLACEMENT
1691 W 3/1 2000-10 Annex 1 Flake graphite cast iron (grey cast iron); Properties 1985-05
SUPERSEDING DOCUMENT:
DIN EN 1561 (2012-01)
Founding – Grey cast irons
2353 HP 100 R 2007-11 5.6.1, Non-soldering compression fittings with cutting ring – 1998-12
7.4.1 Complete fittings and survey
SUPERSEDING DOCUMENT:
DIN 2353 (2013-01)
Non-soldering compression fittings with cutting ring –
Complete fittings and survey
2401-1 W 3/2 2000-10 2.5, Components subject to internal or external pressure; Pressure 1977-05
Table 1 and temperature data; Terminology, Nominal pressure ratings
SUPERSEDING DOCUMENT:
DIN EN 764-1 (2004-09)
Pressure equipment – Part 1: Terminology –
Pressure, temperature, volume, nominal size
DIN EN 1333 (2006-06)
Flanges and their joints – Pipework components –
Definition and selection of PN
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
2413 B1 2000-10 7 Steel Pipes; Calculation of Wall Thickness Subjected to Internal 1972-06
Pressure
SUPERSEDING DOCUMENT:
DIN 2413 (2011-06)
Seamless steel tubes for oil- and water-hydraulic systems –
Calculation rules for pipes and elbows for dynamic loads
DIN EN 13480-3 (2013-11)
Metallic industrial piping – Part 3: Design and calculation
2413-1 HP 100 R 2007-11 6.2.1 Steel pipes – Design of steel pressure pipes 1993-10
SUPERSEDING DOCUMENT:
DIN EN 13480-3 (2013-11)
Metallic industrial piping – Part 3: Design and calculation
2413-2 HP 100 R 2007-11 6.2.1 Steel pipes – Design of elbows and bends for steel pressure 1993-10
pipes
SUPERSEDING DOCUMENT:
DIN EN 13480-3 (2013-11)
AD 2000-Merkblatt
2448 HP 801 2004-02 4.9.1 Seamless Steel Pipes and Tubes – Dimensions, 1981-02
No. 14 Conventional Masses per Unit Length
SUPERSEDING DOCUMENT:
DIN EN 10220 (2003-03)
Seamless and welded steel tubes – Dimensions and masses
per unit length
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
2510 B7 2015-04 2.2.1, 2.3.1 Bolted Connections with Reduced Shank; Survey, Range of 1947-10
Application and Examples of Installation
SUPERSEDING DOCUMENT:
DIN 2510-1 (1974-09)
Bolted Connections with Reduced Shank; Survey,
Range of Application and Examples of Installation
DIN 2510-3 (1971-08)
Bolted Connections with Reduced Shank; Stud-bolts
DIN 2510-5 (1971-08)
Bolted Connections with Reduced Shank; Hexagon Nuts
SUPERSEDING DOCUMENT:
DIN EN 1092-1 (2013-04)
Flanges and their joints – Circular flanges for pipes, valves,
fittings and accessories, PN designated – Part 1: Steel flanges
AD 2000-Merkblatt
2526 HP 801 2002-05 5.1.3 Flanges; Types of Contact Surfaces 1975-03
No. 34
PARTIALLY SUPERSEDED BY:
DIN EN 1092-2 (1997-06)
Flanges and their joints – Circular flanges for pipes, valves,
fittings and accessories, PN designated – Part 2: Cast iron
flanges
SUPERSEDING DOCUMENT:
DIN EN 1092-1 (2013-04)
Flanges and their joints – Circular flanges for pipes, valves,
fittings and accessories, PN designated – Part 1: Steel flanges
2605-1 B 1 App. 1 2006-05 1 Steel butt-welding pipe fittings; Elbows and bends with reduced 1991-02
HP 100 R 2007-11 6.2.1.2 pressure factor
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2605-2 B 1 App. 1 2006-05 1 Butt welding fittings – Elbows – Part 2: Full correlation of 1995-06
HP 100 R 2007-11 6.2.1.2 utilization
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
2605-2 DIN EN 10253-4 (2008-06)
(continued) Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2609 HP 8/3 2010-02 Annex Steel butt-welding pipe fittings; Technical delivery conditions 1991-02
HP 100 R 2007-11 5.3.2
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
AD 2000-Merkblatt
2615-1 HP 100 R 2007-11 6.2.1.3 Steel butt-welding pipes fittings; Tees with reduced pressure 1992-05
factor
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2615-2 HP 100 R 2007-11 6.2.1.3 Steel butt-welding pipe fittings; Tees for use at full service 1992-05
pressure
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2616-1 HP 100 R 2007-11 6.2.1.2 Steel butt-welding pipe fittings; Eccentric reducers with 1991-02
reduced pressure factor
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
2616-1 SUPERSEDING DOCUMENT:
(continued)
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2616-2 HP 100 R 2007-11 6.2.1.2 Steel butt-welding pipe fittings; Reducers for use at full service 1991-02
pressure
SUPERSEDING DOCUMENT:
DIN EN 10253-2 (2008-09)
Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
DIN EN 10253-4 (2008-06)
AD 2000-Merkblatt
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
DIN EN 10253-4 Corrigendum 1 (2009-11)
Butt-welding pipe fittings – Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
2690 B5 2011-08 2.2 Sealings for Flanges with Plain Contact Surfaces; 1966-05
B7 2010-09 Table 1 Nominal Pressure 1 to 40
SUPERSEDING DOCUMENT:
DIN EN 1514-1 (1997-08)
Flanges and their joints – Dimensions of gaskets for
PN-designated flanges – Part 1: Non-metallic flat gaskets
with or without inserts
2691 B5 2011-08 2.2 Sealings for Tongued and Grooved Flanges; 1971-11
Nominal Pressure 10 to 160
SUPERSEDING DOCUMENT:
DIN EN 1514-1 (1997-08)
Flanges and their joints – Dimensions of gaskets for
PN-designated flanges – Part 1: Non-metallic flat gaskets
with or without inserts
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
2692 B5 2011-08 2.2 Sealings for Flanges with Recess; Nominal Pressure 10 to 100 1966-05
B7 2010-09 Table 1
SUPERSEDING DOCUMENT:
DIN EN 1514-1 (1997-08)
Flanges and their joints – Dimensions of gaskets for
PN-designated flanges – Part 1: Non-metallic flat gaskets
with or without inserts
2695 B7 2010-09 Table 1 Diaphragm-weld packings and weld ring seals for flange 2002-11
connections
2696 B7 2010-09 Table 1 Flange connections with lens shaped gasket 1999-08
2697 B7 2010-09 Table 1 Grooved O-rings and seals for flanged joints; 1972-01
Nominal pressures 64 to 400
SUPERSEDING DOCUMENT:
DIN EN 1514-6 (2004-03)
Flanges and their joints – Dimensions of gaskets for
PN-designated flanges – Part 6: Covered serrated metal
gaskets for use with steel flanges
3320-1 A1 2006-10 3), 7.2.2 Safety valves; Safety shut-off valves; Definitions, sizing, 1984-09
AD 2000-Merkblatt
marking
3381 A 403 2001-06 3.2.2 Safety devices for gas supply installations operating at working 1984-06
pressures up to 100 bar; Pressure relief governors and safety
shut-off devices
SUPERSEDING DOCUMENT:
DIN EN 14382 (2009-07)
Safety devices for gas pressure regulating stations and
installations – Gas safety shut-off devices for inlet pressures
up to 100 bar
3394-1 HP 801 2004-02 6.3.7 Automatic control valves – Part 1: Pressure relief, safety and 2004-05
No. 25 regulating valves for pressure above 4 bar up to 16 bar
3440 A 403 2001-06 5.1, 6 Temperature control and limiting devices for heat generating 1984-07
HP 801 2004-02 6.2.13 systems; Safety requirements and testing
No. 25
SUPERSEDING DOCUMENT:
DIN EN 14597 (2012-09)
Temperature control devices and temperature limiters for heat
generating systems
3441-1 HP 120 R 2001-06 5.4.2 Unplasticized polyvinyl chloride (PVC-U) valves; 1989-05
Requirements and testing
SUPERSEDING DOCUMENT:
DIN EN ISO 16135 (2006-06)
Industrial valves – Ball valves of thermoplastics materials
DIN EN ISO 16136 (2006-06)
Industrial valves – Butterfly valves of thermoplastics materials
DIN EN ISO 16137 (2006-06)
Industrial valves – Check valves of thermoplastics materials
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
3441-1 DIN EN ISO 16138 (2006-06)
(continued) Industrial valves – Diaphragm valves of thermoplastics materials
DIN EN ISO 16139 (2006-06)
Industrial valves – Gate valves of thermoplastics materials
DIN EN ISO 21787 (2006-06)
Industrial valves – Globe valves of thermoplastics materials
3441-2 HP 120 R 2001-06 5.4.2 Unplasticized polyvinyl chloride (PVC-U) valves; Ball valves; 1984-08
Dimensions
SUPERSEDING DOCUMENT:
DIN EN ISO 16135 (2006-06)
Industrial valves – Ball valves of thermoplastics materials
3441-3 HP 120 R 2001-06 5.4.2 Unplasticized polyvinyl chloride (PVC-U) valves; 1984-08
Diaphragm valves; Dimensions
SUPERSEDING DOCUMENT:
DIN EN ISO 16138 (2006-06)
Industrial valves – Diaphragm valves of thermoplastics
materials
AD 2000-Merkblatt
3441-4 HP 120 R 2001-06 5.4.2 Valves of Rigid PVC (Unplasticized or Rigid Polyvinyl Chloride); 1978-06
Y-valves (Inclined-seat Valves), Dimensions
SUPERSEDING DOCUMENT:
DIN EN ISO 21787 (2006-06)
Industrial valves – Globe valves of thermoplastics materials
3441-5 HP 120 R 2001-06 5.4.2 Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and 1984-01
PN 10 wafer type butterfly valves; Dimensions
SUPERSEDING DOCUMENT:
DIN EN ISO 16136 (2006-06)
Industrial valves – Butterfly valves of thermoplastics materials
3441-6 HP 120 R 2001-06 5.4.2 Unplasticized polyvinyl chloride (UPVC) valves; Gate valves 1988-03
with inside screw stem; Dimensions
SUPERSEDING DOCUMENT:
DIN EN ISO 16139 (2006-06)
Industrial valves – Gate valves of thermoplastics materials
3441-7 HP 120 R 2001-06 5.4.2 Valves for water supply systems requirements and acceptance E 1990-12
tests
3442-1 HP 120 R 2001-06 5.4.5 Polypropylene (PP) valves; Requirements and testing 1987-05
SUPERSEDING DOCUMENT:
DIN EN ISO 16135 (2006-06)
Industrial valves – Ball valves of thermoplastics materials
DIN EN ISO 16136 (2006-06)
Industrial valves – Butterfly valves of thermoplastics materials
DIN EN ISO 16137 (2006-06)
Industrial valves – Check valves of thermoplastics materials
DIN EN ISO 16138 (2006-06)
Industrial valves – Diaphragm valves of thermoplastics materials
DIN EN ISO 16139 (2006-06)
Industrial valves – Gate valves of thermoplastics materials
DIN EN ISO 21787 (2006-06)
Industrial valves – Globe valves of thermoplastics materials
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
3442-2 HP 120 R 2001-06 5.4.5 Fittings of PP (Polypropylene); Ball valves, Dimensions 1980-10
SUPERSEDING DOCUMENT:
DIN EN ISO 16135 (2006-06)
Industrial valves – Ball valves of thermoplastics materials
3442-3 HP 120 R 2001-06 5.4.5 Polypropylene (PP) valves; Diaphragm valves; Dimensions 1987-07
SUPERSEDING DOCUMENT:
DIN EN ISO 16138 (2006-06)
Industrial valves – Diaphragm valves of thermoplastics
materials
SUPERSEDING DOCUMENT:
DIN EN 12516-2 (2004-10)
Industrial valves – Shell design strength – Part 2: Calculation
method for steel valve shells
3859 HP 100 R 2007-11 5.6.1 Compression couplings; Technical delivery conditions 1984-03
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN 3859-1 (2005-09)
Compression couplings – Part 1: Technical delivery conditions
DIN EN ISO 8434-1 (2008-02)
Metallic tube connections for fluid power and general use –
Part 1: 24 degree cone connectors
4102-1 HP 801 2004-02 7.2.1 Fire behaviour of building materials and building components – 1998-05
No. 25 Part 1: Building materials; Concepts, requirements and tests
4114-1 S 3/0 2007-11 4.3.3.1, Steel structures; Stability (buckling, overturning, bulging), 1952-07
4.3.3.2 method of calculation, regulations
S 3/2 2004-02 7
S 3/3 2001-09 Table 1 Please note: DIN 4114 Part 1 of July 1952 and DIN 4114
Part 2 of February 1953 still apply to buckling of linear
members and frames of steel structures until the publication of
an EN standard.
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1 (2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-3 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
4114-1 National Annex – Nationally determined parameters –
(continued) Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
DIN EN 1993-1-5 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
4114-2 S 3/0 2007-11 4.3.3.2 Steel construction; Stability cases (buckling, tilting, bulging), 1953-02
S 3/2 2004-02 7 design principles, guidelines
S 3/3 2001-09 Table 1
Please note: DIN 4114 Part 1 of July 1952 and DIN 4114
Part 2 of February 1953 still apply to buckling of linear
members and frames of steel structures until the publication of
an EN standard.
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
AD 2000-Merkblatt
and rules for buildings
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1 (2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-3 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
DIN EN 1993-1-5 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
4119-1 S 3/0 2007-11 4.1.4.6 Above-ground Cylindrical Flat-bottomed Tank Installations of 1979-06
Metallic Materials; Fundamentals, Design, Tests
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
4119-1 DIN EN 14620-2 (2006-12)
(continued) Design and manufacture of site built, vertical, cylindrical, flat-
bottomed steel tanks for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and -165 °C –
Part 2: Metallic components
DIN EN 14620-3 (2006-12)
Design and manufacture of site built, vertical, cylindrical, flat-
bottomed steel tanks for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and 165 °C –
Part 3: Concrete components
DIN EN 14620-4 (2006-12)
Design and manufacture of site built, vertical, cylindrical, flat-
bottomed steel tanks for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and 165 °C –
Part 4: Insulation components
DIN EN 14620-5 (2006-12)
Design and manufacture of site built, vertical, cylindrical, flat-
bottomed steel tanks for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and 165 °C –
Part 5: Testing, drying, purging and cool-down
AD 2000-Merkblatt
4119-2 S 3/0 2007-11 4.1.4.6 Above-ground cylindrical flat-bottom tank structures of metallic 1980-02
materials; Calculation
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
4133 S 3/0 2007-11 4.1.4.5, Steel stacks 1991-11
4.1.4.6,
4.1.4.8, PARTIALLY SUPERSEDED BY:
5 DIN EN 13084-1 (2007-05)
Free-standing chimneys – Part 1: General requirements
4140 HP 801 2004-02 3.2 Insulation work on industrial installations and building 1996-11
No. 14 equipment – Execution of thermal and cold insulation
SUPERSEDING DOCUMENT:
DIN 4140 (2014-04)
Insulation work on industrial installations and building
equipment – Execution of thermal and cold insulations
4149 S 3/0 2013-02 4.1.4.9, 5 Buildings in german earthquake areas – Design loads, analysis 2005-04
and structural design of buildings
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
National Annex – Nationally determined parameters –
AD 2000-Merkblatt
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1 (2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-3 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
DIN EN 1993-1-5 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
4226-1 HP 801 2004-02 7.1 Aggregates for concrete; Aggregates of dense structure 1983-04
No. 25 (heavy aggregates); terminology, designation and requirements
4680-1 A 5 App. 1 2000-10 2.4.7 Stationary, above ground, steel pressure vessels for the 1992-05
HP 801 2004-02 6.2.7 storage of liquefied petroleum gas; Dimensions and mountings
No. 25
SUPERSEDING DOCUMENT:
DIN EN 12542 (2010-12)
LPG equipment and accessories – Static welded steel
cylindrical tanks, serially produced for the storage of Liquefied
Petroleum Gas (LPG) having a volume not greater than
13 m3 – Design and manufacture
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
4680-2 HP 801 2004-02 6.2.7 Stationary, partially sunk, steel pressure vessels for the storage 1992-05
No. 25 of liquefied petroleum gas; Dimensions and mountings
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1 (2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
4681-1 HP 801 2004-02 6.2.7 Steel fixed size pressure vessels for LPG, for underground 1988-01
No. 25 installation; Dimensions, equipment
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
AD 2000-Merkblatt
4754 HP 801 2002-05 3 Heat transfer installations working with organic heat transfer 1994-09
No. 37 fluids – Safety requirements, test
4787-1 A 404 2001-06 7.2 Atomizing oil burners; Concepts, safety requirements, testing, 1981-09
marking
4788-1 A 404 2001-06 7.2 Gas Burners; Gas Burners without Blowers 1977-06
4788-2 A 404 2001-06 7.2 Induces and forced draught gas burners; Concepts, safety 1990-02
requirements, testing and marking
SUPERSEDING DOCUMENT:
DIN EN 676 (2008-11)
Automatic forced draught burners for gaseous fuels
4810 A 5 App. 1 2000-10 2.4.8 Steel pressure vessels for water supply systems 1991-09
6275 A 5 App. 1 2000-10 2.4.4 Internal combustion engines for general purposes; Compressed 1982-04
air containers for permissible working overpressures up to
30 bar
7079-1 HP 801 2004-02 4.9.2 Pressure resistant circular glass-to-metal fused sight glasses – 1999-05
No. 14 Part 1: For holders with recess
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
7080 A 404 2001-06 5.2 Pressure resistant circular sight glasses of borosilicate glass 2005-05
HP 801 2004-02 4.9.2 without limitation in the range of low temperature
No. 14
N4 2003-07 1)
7081 A 404 2001-06 5.2 Pressure resistant oblong sight glasses of borosilicate glass 1999-05
N4 2003-07 1) without limitation in the range of low temperature
8061 HP 110 R 2001-06 5.2.21 Unplasticized polyvinyl chloride pipes – General quality 1994-08
HP 120 R 2001-06 5.2.2 requirements and testing
SUPERSEDING DOCUMENT:
DIN 8061 (2009-10)
Unplasticized polyvinyl chloride (PVC-U) pipes – General
quality requirements and testing
8062 HP 120 R 2001-06 5.2.2 Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; 1988-11
Dimensions
SUPERSEDING DOCUMENT:
DIN 8062 (2009-10)
Unplasticized polyvinyl chloride (PVC-U) pipes – Dimensions
AD 2000-Merkblatt
8063-1 HP 120 R 2001-06 5.3.2 Pipe joint assemblies and fittings for unplasticized polyvinyl 1986-12
chloride (U-PVC) pressure pipelines; Dimensions of socket
bends
WITHDRAWN WITHOUT REPLACEMENT
8063-2 HP 120 R 2001-06 5.3.2 Pipe Joints and Pipe Fittings for Pipes under Pressure made of 1980-07
Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by
Injection Moulding for Bonding; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-3 HP 120 R 2001-06 5.3.2 Pipe joints and components of unplasticized poly(vinyl chloride) 2002-06
(PVC U) for pipes under pressure – Part 3: Unions; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-4 HP 120 R 2001-06 5.3.2 Pipe joint assemblies and fittings for unplasticized polyvinyl 1983-09
chloride (PVC-U) pressure pipes; Bushings, flanges, seals;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-5 HP 120 R 2001-06 5.3.2 Pipe joints components of unplasticized poly(vinyl chloride) 1999-10
(PVC-U) for pipes under pressure – Part 5: General quality
requirements, testing
WITHDRAWN WITHOUT REPLACEMENT
8063-6 HP 120 R 2001-06 5.3.2 Pipe joints and components of unplasticized poly(vinyl chloride) 2002-06
(PVC U) for pipes under pressure – Part 6: Injection-moulded
elbows for solvent cementing; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-7 HP 120 R 2001-06 5.3.2 Pipe joints and their elements of unplasticized polyvinylchloride 1980-07
(unplasticized PVC) under pressure; Tees and branches of
injection moulded for cold welding, dimensions
WITHDRAWN WITHOUT REPLACEMENT
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
8063-8 HP 120 R 2001-06 5.3.2 Pipe joints and components of unplasticized poly(vinyl chloride) 2002-06
(PVC U) for pipes under pressure – Part 8: Injection-moulded
sockets, caps and nipples for solvent cementing; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-9 HP 120 R 2001-06 5.3.2 Pipe joints and their elements for pipes of unplasticized 1980-08
polyvinylchloride (unplasticized PVC) under pressure; Sockets
reducing of injection moulded for cold welding, dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-10 HP 120 R 2001-06 5.3.2 Pipe joints and components of unplasticized poly(vinyl chloride) 2002-06
(PVC U) for pipes under pressure – Part 10: Wall bracket
elbows; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-11 HP 120 R 2001-06 5.3.2 Pipe Joints and Pipe Fittings for Pipes under Pressure made of 1980-07
Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with
Primary Element of Copper-Zinc-Alloy (Brass) for Bonding;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
8063-12 HP 120 R 2001-06 5.3.2 Pipe joint assemblies and fittings of unplasticized polyvinyl 1987-01
AD 2000-Merkblatt
8074 HP 120 R 2001-06 5.2.4 Polyethylene (PE) – Pipes PE 63, PE 80, PE 100, PE-HD – 1999-08
Dimensions
SUPERSEDING DOCUMENT:
DIN 8074 (2011-12)
Polyethylene (PE) – Pipes PE 80, PE 100 – Dimensions
8075 HP 110 R 2001-06 5.2.4 Polyethylene (PE) pipes – PE 63, PE 80, PE 100, PE-HD – 1999-08
HP 120 R 2001-06 5.2.4 General quality requirements, testing
SUPERSEDING DOCUMENT:
DIN 8075 (2011-12)
Polyethylene (PE) pipes – PE 80, PE 100 – General quality
requirements, testing
8077 HP 120 R 2001-06 5.2.5 Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – 2007-05
Dimensions
SUPERSEDING DOCUMENT:
DIN 8077 (2008-09)
Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT –
Dimensions
8078 HP 110 R 2001-06 5.2.2.1 Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – 2007-05
HP 120 R 2001-06 5.2.5 General quality requirements and testing
SUPERSEDING DOCUMENT:
DIN 8078 (2008-09)
Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT –
General quality requirements and testing
8079 HP 120 R 2001-06 5.2.3 Chlorinated polyvinyl chloride (PVC-C) pipes – PVC-C 250 – 1997-12
Dimensions
SUPERSEDING DOCUMENT:
DIN 8079 (2009-10)
Chlorinated polyvinyl chloride (PVC-C) pipes – Dimensions
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
8080 HP 110 R 2001-06 5.2.2.1 Chlorinated polyvinyl chloride (PVC-C) pipes PVC-C 250 – 2000-08
HP 120 R 2001-06 5.2.3 General quality requirements, testing
SUPERSEDING DOCUMENT:
DIN 8080 (2009-10)
Chlorinated polyvinyl chloride (PVC-C) pipes – General quality
requirements, testing
8558-1 S 3/0 2007-11 4.6 Directions for Welded Assemblies for Boilers, Vessels and 1967-05
S 3/1 2001-09 2 Piping in Unalloyed and Alloy Steels; Examples of Fabrication
S 3/2 2004-02 2.3.2
S 3/3 2001-09 2 SUPERSEDING DOCUMENT:
S 3/4 2001-09 2 DIN EN 1708-1 (2010-05)
Welding – Basic welded joint details in steel –
Part 1: Pressurized components
8558-2 S 3/0 2007-11 4.6 Design and workmanship of welded joints; Steel vessels and 1983-09
S 3/1 2001-09 2 apparatus used in the chemical industry
S 3/2 2004-02 2.3.2
S 3/3 2001-09 2 SUPERSEDING DOCUMENT:
S 3/4 2001-09 2
DIN EN 1708-1 (2010-05)
Welding – Basic welded joint details in steel –
AD 2000-Merkblatt
Part 1: Pressurized components
8902 A 404 2001-06 5.2 Pressure resistant circular sight glasses of soda-lime-glass 1996-02
N4 2003-07 1) without limitation in the range of low temperature
8903 A 404 2001-06 5.2 Pressure resistant oblong sight glasses of soda-lime-glass 1996-02
N4 2003-07 1) without limitation in the range of low temperature
8975-2 HP 801 2004-02 3.1 Refrigeration Plants; Safety Requirements for Construction, 1978-05
No. 14 Erection and Operation; Selection of Materials for Refrigeration
Plants
8975-5 HP 801 2004-02 4.8 Refrigerating plants; Safety principles for design, equipment 1988-02
No. 14 and installation; Testing prior to commissioning
8975-7 HP 801 2004-02 3.1 Refrigeration plant; Safety principles for design, equipment and 1989-02
No. 14 installation; Safety devices in refrigeration plant for protection
against unpermissible pressure stresses
8975-8 HP 801 2004-02 3.1 Refrigeration plants; Safety requirements for construction, 1979-04
No. 14 equipment, installation and operation; Level indicating devices
for refrigerant vessels, liquid level indicators
12116 N4 2003-07 Table 1 Testing of glass – Resistance to attack by a boiling aqueous 2001-03
solution of hydrochloric acid – Method of test and classification
SUPERSEDING DOCUMENT:
DIN EN ISO 6556 (2013-02)
Laboratory glassware – Filter flasks
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
12491 N4 2003-07 1 Laboratory glassware – Vacuum desiccators 1998-07
SUPERSEDING DOCUMENT:
DIN EN ISO 13130 (2011-10)
Laboratory glassware – Desiccators
14406-1 HP 801 2002-05 2.2 Portable fire extinguishers; Terms, types, requirements 1983-02
No. 18
SUPERSEDING DOCUMENT:
DIN EN 3-7 (2007-10)
Portable fire extinguishers – Part 7: Characteristics,
performance requirements and test methods
14406-3 HP 801 2002-05 2.2 Portable fire extinguishers; Extinguisher bodies for charging 1981-04
No. 18 extinguishers and extinguishers with chemical pressure
generation; Requirements and test methods and marking
SUPERSEDING DOCUMENT:
DIN EN 3-8 (2007-02)
Portable fire extinguishers – Part 8: Additional requirements to
EN 3-7 for the construction, resistance to pressure and
mechanical tests for extinguishers with a maximum allowable
AD 2000-Merkblatt
14675 HP 801 2004-02 7.1.8 Fire detection and fire alarm systems – Design and operation 2003-11
No. 25
SUPERSEDING DOCUMENT:
DIN 14675 (2012-04)
Fire detection and fire alarm systems – Design and operation
15018-1 S2 2010-11 Annex 1 Cranes; Steel structures; Verification and analyses 1984-11
16831-1 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2003-05
pipes – Type PB 125 – Part 1: Dimensions of injection-moulded
elbows for socket welding
16831-2 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2003-05
pipes – Type PB 125 – Part 2: Dimensions of injection-moulded
tees for socket welding
16831-3 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2003-05
pipes – Type PB 125 – Part 3: Dimensions of injection-moulded
sockets and caps for socket welding
16831-4 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2003-05
pipes – Type PB 125 – Part 4: Dimensions of injection-moulded
reducers for socket welding
16831-5 HP 120 R 2001-06 5.3.5 Pipe joints and components of polybutene (PB) for pipes under 1999-10
pressure; PB 125 – Part 5: General quality requirements,
testing
16831-6 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2003-09
pipes – Type PB 125 – Part 6: Dimensions of fittings for
resistance welding
16831-7 HP 120 R 2001-06 5.3.5 Pipe fittings and joint assemblies for polybutene pressure 2004-02
pipes – Type PB 125 – Part 7: Dimensions of bushings, flanges
and sealing elements for socket welding
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
16867 HP 110 R 2001-06 5.2.1.1 Glass fibre reinforced polyester resin (UP-GF) pipes, fittings 1982-07
and joints for use in chemical pipelines; Technical delivery
conditions
16868-1 HP 110 R 2001-06 5.2.1.1 Glass fibre reinforced unsaturated polyester resin (UP-GF) 1994-11
pipes – Part 1: Wound, filled; Dimensions
16868-2 HP 110 R 2001-06 5.2.1.1 Glass fibre reinforced unsaturated polyester resin (UP-GF) 1994-11
pipes – Part 2: Wound, filled; General quality requirements,
testing
16870-1 HP 110 R 2001-06 5.2.1.3 Wound glass fibre reinforced epoxy resin pipes; Dimensions 1987-01
16871 HP 110 R 2001-06 5.2.1.3 Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) 1982-02
pipes; Dimensions
16962-1 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Bends of Segmental Construction for
Butt-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-2 HP 120 R 2001-06 5.3.4 Pipe joint assemblies and fittings for types 1 and 2 1983-02
polypropylene (PP) pressure pipes; Tees and branches
AD 2000-Merkblatt
produced by segment inserts and necking for butt welding;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-3 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-
welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-4 HP 120 R 2001-06 5.3.4 Pipe joint assemblies and fittings for types 1 and 2 1988-11
polypropylene (PP) pressure pipes; Adaptors for fusion jointing,
flanges and sealing elements; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-6 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-
welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-7 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for
Socket-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-8 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps
for Socket-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-9 HP 120 R 2001-06 5.3.4 Pipe joint assemblies and fittings for types 1 and 2 1983-06
polypropylene (PP) pressure pipes; Injection moulded reducers
and nipples for socket welding; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-10 HP 120 R 2001-06 5.3.4 Pipe joint assemblies and fittings for types 1 to 3 polypropylene 1989-10
(PP) pressure pipes; Injection-moulded fittings for butt welding;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
16962-11 HP 120 R 2001-06 5.3.4 Pipe Joints and Elements for Polypropylene (PP) Pressure 1980-08
Pipelines, Types 1 and 2; Turned and Pressed Reducing
Sockets for Butt-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-12 HP 120 R 2001-06 5.3.4 Pipe joints and components of polypropylene (PP) for pipes 1999-10
under pressure, PP-H 100, PP-B 80 and PP-R 80 – Part 12:
Flange adapters, flanges, sealing rings for socket welding;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16962-13 HP 120 R 2001-06 5.3.4 Pipe joint assemblies and fittings for type 1 and type 2 1987-06
polypropylene (PP) pressure pipes; Pipe couplings; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-1 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Density Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of
Segmental Construction for Butt-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-2 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for types 1 and 2 high-density 1983-02
AD 2000-Merkblatt
16963-3 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Density Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for
Butt-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-4 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for high-density polyethylene 1988-11
(PE-HD) pressure pipes; Adaptors for fusion jointing, flanges
and sealing elements; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-5 HP 120 R 2001-06 5.3.3 Pipe joints and components of polyethylene (PE) for pipes 1999-10
under pressure, PE 80 and PE 100 – Part 5: General quality
requirements, testing
WITHDRAWN WITHOUT REPLACEMENT
16963-6 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for high-density polyethylene 1989-10
(PE-HD) pressure pipes; Injection-moulded fittings for butt
welding; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-7 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for high-density polyethylene 1989-10
(PE-HD) pressure pipes; Fittings for resistance welding;
Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-8 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Density Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded
Elbows for Socket-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-9 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Density Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded
Tee Pieces for Socket-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
16963-10 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Density Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded
Sockets and Caps for Socket-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-11 HP 120 R 2001-06 5.3.3 Pipe joints and components of polyethylene (PE) for pipes 1999-10
under pressure, PE 80 and PE 100 – Part 11: Flange adapters,
flanges, sealing rings for socket welding; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-13 HP 120 R 2001-06 5.3.3 Pipe Joints and Elements for High Pressure Polyethylene 1980-08
(HDPE) Pressure Pipelines, Types 1 and 2; Turned and
Pressed Reducing Sockets for Butt-welding, Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-14 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for types 1 and 2 high-density 1983-06
polyethylene (HDPE) pressure pipes; Injection moulded
reducers and nipples for socket welding; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16963-15 HP 120 R 2001-06 5.3.3 Pipe joint assemblies and fittings for high-density polyethylene 1987-06
AD 2000-Merkblatt
(HDPE) pressure pipes; Pipe couplings; Dimensions
WITHDRAWN WITHOUT REPLACEMENT
16964 HP 110 R 2001-06 5.2.1.1 Wound glass fibre reinforced polyester resins (UP-GF) pipes; 1988-11
General quality requirements and testing
16965-1 HP 110 R 2001-06 5.2.1.1 Wound glass fibre reinforced polyester resin (UP-GF); 1982-07
Pipes, Type A pipes, dimensions
16965-2 HP 110 R 2001-06 5.2.1.1 Wound glass fibre reinforced polyester resin (UP-GF); 1982-07
Pipes, Type B pipes, dimensions
16965-4 HP 110 R 2001-06 5.2.1.1 Wound glass fibre reinforced polyester resin (UP-GF); 1982-07
Pipes, Type D pipes, dimensions
16965-5 HP 110 R 2001-06 5.2.1.1 Wound glass fibre reinforced polyester resin (UP-GF); 1982-07
Pipes, Type E pipes, dimensions
16966-1 HP 110 R 2001-06 5.3.1 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and 1988-11
joint assemblies; Fittings; General quality requirements and
testing
16966-5 HP 110 R 2001-06 5.3.1 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and 1982-07
joints; Reducers, Dimensions
16966-6 HP 110 R 2001-06 5.4.1 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and 1982-07
joint assemblies; Collars, flanges, joint rings, dimensions
16966-7 HP 110 R 2001-06 5.4.1 Pipe joints and their elements of glass fibre reinforced polyester 1995-04
resins – Part 7: Bushings, flanges, flanged and butt joints;
General quality requirements and test methods
16966-8 HP 110 R 2001-06 5.4.1 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and 1982-07
joints; Laminated joints; Dimensions
16968 HP 120 R 2001-06 5.2.6 Polybutene pipes (PB) – General quality requirements and 1996-12
testing
SUPERSEDING DOCUMENT:
DIN 16968 (2012-11)
Pipes made of Polybutene-1 (PB-1) – PB 125 – General quality
requirements and testing
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
16969 HP 120 R 2001-06 5.2.6 Pipes made of polybutene (PB) – PB 125 – Dimensions 1997-12
SUPERSEDING DOCUMENT:
DIN 16969 (2012-11)
Pipes made of polybutene-1 (PB-1) – PB 125 – Dimensions
16970 HP 120 R 2001-06 7.3.2 Adhesives for Bonding Pipes and Pipe System Elements of 1970-12
Rigid PVC; General Quality Requirements and Testings
WITHDRAWN WITHOUT REPLACEMENT
17052-1 HP 7/1 2014-11 2.2 Heat treatment furnaces – Part 1: Requirements for 2013-09
temperature uniformity
17100 HP 8/1 2001-09 3.4 Steels for General Structural Purposes; Quality Standard 1980-01
HP 8/2 2000-10 3.3
HP 801 2002-05 3.1.3 SUPERSEDING DOCUMENT:
No. 34 DIN EN 10025-1 (2005-02)
Hot rolled products of structural steels – Part 1: General
technical delivery conditions
DIN EN 10025-2 (2005-04)
Hot rolled products of structural steels – Part 2: Technical
delivery conditions for non-alloy structural steels
AD 2000-Merkblatt
17102 HP 0 2011-05 Table 1a Weldable normalized fine grain structural steels; Technical 1983-10
HP 5/3 2011-05 Table 1 delivery conditions for plate, strip, wide flats, sections and bars
HP 8/1 2001-09 Table 1
W 6/1 2003-01 6 SUPERSEDING DOCUMENT:
W9 2010-11 2.1.2, DIN EN 10025-1 (2005-02)
7.1 Hot rolled products of structural steels – Part 1: General
W 10 2007-11 6 technical delivery conditions
W 12 2003-07 2.2.2
DIN EN 10025-3 (2005-02)
W 13 2008-11 2.4,
Hot rolled products of structural steels – Part 3: Technical
3.4, 3.12,
delivery conditions for normalized/normalized rolled weldable
Table 2,
fine grain structural steels
5.1.2, 6.4
DIN EN 10028-1 (2009-07)
Flat products made of steels for pressure purposes –
Part 1: General requirements
DIN EN 10028-3 (2009-09)
Flat products made of steels for pressure purposes –
Part 3: Weldable fine grain steels, normalized
17103 HP 0 2011-05 Table 1a Forging of weldable fine grain steels; Technical delivery E 1986-11
HP 8/1 2001-09 Table 1 conditions
HP 801 2002-05 3.1.3
No. 34 SUPERSEDING DOCUMENT:
W9 2010-11 7.1 DIN EN 10222-1 (2002-07)
W 10 2007-11 6 Steel forgings for pressure purposes – Part 1: General require-
W 12 2003-07 2.2.2, 2.2.3, ments for open die forgings (includes Amendment A1:2002)
Table 2,
DIN EN 10222-4 (2001-12)
Table 4
Steel forgings for pressure purposes – Part 4: Weldable fine
W 13 2008-11 2.4, 3.4,
grain steels with high proof strength
6.4, Table 2
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
17155 HP 8/1 2001-09 Table 1 Creep resistant steel plate and strip; Technical delivery 1983-10
conditions
SUPERSEDING DOCUMENT:
DIN EN 10028-1 (2009-07)
Flat products made of steels for pressure purposes – Part 1:
General requirements
DIN EN 10028-2 (2009-09)
Flat products made of steels for pressure purposes – Part 2:
Non-alloy and alloy steels with specified elevated temperature
properties
17173 HP 5/3 2011-05 Table 1 Seamless circular tubes made from steels with low temperature 1985-02
W 12 2003-07 2.1.4, toughness – Technical delivery conditions
Table 1,
Table 3 SUPERSEDING DOCUMENT:
DIN EN 10216-4 (2014-03)
Seamless steel tubes for pressure purposes – Technical
delivery conditions – Part 4: Non-alloy and alloy steel tubes
with specified low temperature properties
17174 HP 5/3 2011-05 Table 1 Welded circular tubes made from steels with low temperature 1985-02
AD 2000-Merkblatt
toughness – Technical delivery conditions
SUPERSEDING DOCUMENT:
DIN EN 10217-4 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 4: Electric welded non-alloy steel tubes with
specified low temperature properties
DIN EN 10217-6 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 6: Submerged arc welded non-alloy steel
tubes with specified low temperature properties
17175 HP 801 2002-05 3.1.2.1 Seamless Tubes of Heat-resistant Steels – Technical 1979-05
No. 34 Conditions of Delivery
W4 2008-05 Table A 2
W 6/1 2003-01 6 SUPERSEDING DOCUMENT:
W 12 2003-07 2.1.3, DIN EN 10216-2 (2014-03)
Table 1, Seamless steel tubes for pressure purposes – Technical
Table 3 delivery conditions – Part 2: Non-alloy and alloy steel tubes
with specified elevated temperature properties
17177 W4 2008-05 Table A 2 Electric Pressure-welded Steel Tubes for Elevated 1979-05
Temperatures – Technical Conditions of Delivery
SUPERSEDING DOCUMENT:
DIN EN 10217-2 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 2: Electric welded non-alloy and alloy steel
tubes with specified elevated temperature properties
17178 HP 5/3 2011-05 Table 1 Welded circular fine grain steel tubes subject to special 1986-05
requirements – Technical delivery conditions
SUPERSEDING DOCUMENT:
DIN EN 10217-3 (2005-04)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 3: Alloy fine grain steel tubes
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
17179 HP 5/3 2011-05 Table 1 Seamless circular fine grain steel tubes subject to special 1986-05
HP 801 2002-05 3.1.2.1 requirements – Technical delivery conditions
No. 34
SUPERSEDING DOCUMENT:
W 12 2003-07 2.1.5,
Table 1, DIN EN 10216-3 (2014-03)
Table 2 Seamless steel tubes for pressure purposes – Technical
delivery conditions – Part 3: Alloy fine grain steel tubes
17240 HP 8/1 2001-09 Table 1 Heat Resisting and Highly Heat Resisting Materials for Bolts 1976-07
W 10 2007-11 6 and Nuts; Quality Specifications
W 12 2003-07 2.2.2
SUPERSEDING DOCUMENT:
DIN EN 10269 (2014-02)
Steels and nickel alloys for fasteners with specified elevated
and/or low temperature properties
17243 HP 801 2002-05 3.1.3 Weldable heat resisting steel forgings and rolled or forged steel 1987-01
No. 34 bars; Technical delivery conditions
S1 2005-02 4.1.3
SUPERSEDING DOCUMENT:
W 12 2003-07 2.2.1,
Table 2, DIN EN 10222-1 (2002-07)
Table 4 Steel forgings for pressure purposes – Part 1: General require-
ments for open die forgings (includes Amendment A1:2002)
AD 2000-Merkblatt
17280 HP 5/3 2011-05 Table 1 Steels with low temperature toughness; Technical delivery 1985-07
W 10 2007-11 6 conditions for plate, sheet, strip, wide flats, sections, bars and
W 12 2003-07 2.2.2, forgings
Table 2,
SUPERSEDING DOCUMENT:
Table 4
DIN EN 10028-1 (2009-07)
Flat products made of steels for pressure purposes – Part 1:
General requirements
DIN EN 10028-4 (2009-09)
Flat products made of steels for pressure purposes – Part 4:
Nickel alloy steels with specified low temperature properties
DIN EN 10222-1 (2002-07)
Steel forgings for pressure purposes – Part 1: General require-
ments for open die forgings (includes Amendment A1:2002)
DIN EN 10222-3 (1999-02)
Steel forgings for pressure purposes – Part 3: Nickel steels with
specified low temperature properties
DIN EN 10269 (2014-02)
Steels and nickel alloys for fasteners with specified elevated
and/or low temperature properties
17440 HP 5/3 2011-05 Table 1 Stainless steels – Technical delivery conditions for drawn wire 2001-03
HP 8/2 2000-10 2 (1996-09)*
W2 2008-02 3.5,
1) to Table 7
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
17440 SUPERSEDING DOCUMENT:
(continued)
DIN EN 10088-3 (2005-09)
Stainless steels – Part 3: Technical delivery conditions for
semi-finished products, bars, rods, wire, sections and bright
products of corrosion resisting steels for general purposes
17441 HP 5/3 2011-05 Table 1 Stainless steels; Technical delivery conditions for cold rolled 1985-07
HP 8/1 2001-09 Table 1 strip and slit strip and for plate and sheet cut therefrom
W 10 2007-11 6
W 12 2003-07 2.2.2 SUPERSEDING DOCUMENT:
DIN EN 10028-7 (2008-02)
Flat products made of steels for pressure purposes – Part 7:
Stainless steels
DIN EN 10088-2 (2005-09)
Stainless steels – Part 2: Technical delivery conditions for
sheet/plate and strip of corrosion resisting steels for general
purposes
17457 HP 5/3 2011-05 Table 1 Welded circular austenitic stainless steel tubes subject to 1985-07
special requirements; Technical delivery conditions
SUPERSEDING DOCUMENT:
AD 2000-Merkblatt
DIN EN 10217-7 (2005-05)
Welded steel tubes for pressure purposes – Technical delivery
conditions – Part 7: Stainless steel tubes
17458 HP 5/3 2011-05 Table 1 Seamless circular austenitic stainless steel tubes subject to 1985-07
special requirements; Technical delivery conditions
SUPERSEDING DOCUMENT:
DIN EN 10216-5 (2014-03)
Seamless steel tubes for pressure purposes – Technical
delivery conditions – Part 5: Stainless steel tubes
17742 HP 0 2011-05 Table 3a Wrought nickel alloys with chromium – Chemical composition 2002-09
17743 HP 0 2011-05 Table 3a Wrought nickel alloys with copper – Chemical composition 2002-09
17744 HP 0 2011-05 Table 3a Wrought nickel alloys with molybdenum and chromium – 2002-09
Chemical composition
18200 HP 120 R 2001-06 4.1 Assessment of conformity for construction products – 2000-05
Certification of construction products by certification body
18800-1 S 3/0 2007-11 4.3.3.1, Structural steelwork; Design and construction 1990-11
4.5
S 3/1 2001-09 8.1 SUPERSEDING DOCUMENT:
S 3/2 2004-02 7
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
18800-1 National Annex – Nationally determined parameters –
(continued) Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1(2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
structural elements
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
18800-2 S 3/2 2004-02 7 Structural steelwork; Analysis of safety against buckling 1990-11
S 3/3 2001-09 6.1 of linear members and frames
SUPERSEDING DOCUMENT:
DIN EN 1993-1-1 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-1/A1 (2014-07)
Eurocode 3: Design of steel structures – Part 1-1: General rules
and rules for buildings
DIN EN 1993-1-3 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
AD 2000-Merkblatt
DIN EN 1993-1-5 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
Please note: DIN 4114 Part 1 of July 1952 and DIN 4114
Part 2 of February 1953 continue to apply until the publication
of an EN on the buckling of linear members and frames of steel
structures.
18800-3 S 3/2 2004-02 7 Structural steelwork; Analysis of safety against buckling 1990-11
S 3/4 2001-09 8 of plates
SUPERSEDING DOCUMENT:
DIN EN 1993-1-3 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-3: General
rules – Supplementary rules for cold-formed members and
sheeting
DIN EN 1993-1-5 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-5: Plated
structural elements
Please note: DIN 4114 Part 1 of July 1952 and DIN 4114
Part 2 of February 1953 continue to apply until the publication
of an EN on the buckling of plates of steel structures.
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
18800-4 S 3/2 2004-02 7 Structural steelwork; Analysis of safety against buckling 1990-11
of shells
SUPERSEDING DOCUMENT:
DIN EN 1993-1-6 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-6: Strength and
stability of shell structures
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-6: Strength and
stability of shell structures
18914 S 3/0 2007-11 4.1.4.6 Thin-walled cylindrical steel tower silos 1985-09
SUPERSEDING DOCUMENT:
DIN EN 1993-1-8 + NA (2010-12)
Eurocode 3: Design of steel structures – Part 1-8: Design of
joints
National Annex – Nationally determined parameters –
Eurocode 3: Design of steel structures – Part 1-8: Design of
joints
DIN EN 1993-4-1 + NA (2010-12)
AD 2000-Merkblatt
19532 HP 120 R 2001-06 6.1 Pipelines of Unplasticized Polyvinyl Chloride (Rigid PVC, 1979-07
PVC-U) for Drinking Water Supply; Pipes, Pipe Joints,
Pipeline Parts; DVGW Technical Rule
SUPERSEDING DOCUMENT:
DIN EN ISO 1452-1 (2010-04)
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure –
Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: General
DIN EN ISO 1452-2 (2010-04)
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure –
Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Pipes
DIN EN ISO 1452-3 (2010-04)
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure –
Unplasticized poly(vinyl chloride) (PVC-U) – Part 3: Fittings
DIN EN ISO 1452-4 (2010-04)
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure –
Unplasticized poly(vinyl chloride) (PVC-U) – Part 4: Valves
DIN EN ISO 1452-5 (2010-04)
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure –
Unplasticized poly(vinyl chloride) (PVC-U) – Part 5: Fitness for
purpose of the system
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
19533 HP 120 R 2001-06 5.2.4 Pipe-lines of high-density PE (high-density polyethylene) and 1976-03
low-density PE (low density polyethylene) for drinking water
supply; Pipes, pipe connections and fittings for pipe-lines
SUPERSEDING DOCUMENT:
DIN EN 12201-1 (2011-11)
Plastics piping systems for water supply, and for drainage
and sewerage under pressure – Polyethylene (PE) –
Part 1: General
Please note: DIN 19533 (1976-03) may be applied
concurrently until 2005-03-31.
DIN EN 12201-2 (2013-12)
Plastics piping systems for water supply, and for drainage
and sewerage under pressure – Polyethylene (PE) –
Part 2: Pipes
Please note: DIN 19533 (1976-03) may be applied
concurrently until 2005-03-31.
DIN EN 12201-3 (2013-01)
Plastics piping systems for water supply, and for drainage
and sewerage under pressure – Polyethylene (PE) –
AD 2000-Merkblatt
Part 3: Fittings
Please note: DIN 19533 (1976-03) may be applied
concurrently until 2005-03-31.
DIN EN 12201-5 (2011-11)
Plastics piping systems for water supply, and for drainage
and sewerage under pressure – Polyethylene (PE) –
Part 5: Fitness for purpose of the system
Please note: DIN 19533 (1976-03) may be applied
concurrently until 2005-03-31.
28004-1 A6 2003-01 4 Flow sheets and diagrams of process plants – Concepts, 1988-05
types of diagram, information content
SUPERSEDING DOCUMENT:
DIN EN ISO 10628 (2001-03)
Flow diagrams for process plants – General rules
SUPERSEDING DOCUMENT:
DIN 28011 (2012-06)
Torispherical heads
SUPERSEDING DOCUMENT:
DIN 28013 (2012-06)
Ellipsoidal heads
28017-1 S 3/0 2007-11 2.6 Columns and other vessels – Part 1: Platforms including 2003-04
accesses
SUPERSEDING DOCUMENT:
DIN 28017-1 (2014-06)
Stationary accesses to process apparatus – Part 1: Platforms
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
28025-1 S 3/6 2001-09 1 Nozzles of Stainless Steel; PN 10 and PN 16 1980-10
SUPERSEDING DOCUMENT:
DIN 28025 (2003-02)
Nozzles of stainless steel – PN 10 to PN 40
SUPERSEDING DOCUMENT:
DIN 28025 (2003-02)
Nozzles of stainless steel – PN 10 to PN 40
28030-1 B8 2007-05 2.2.1 Flanged joints for vessels and process apparatus – 2003-06
Part 1: Apparatus flanged vessels
SUPERSEDING DOCUMENT:
DIN 28030-1 (2013-09)
Flange joints for process vessels – Part 1: Technical delivery
conditions
28040 B7 2010-09 6.1.2.3 Gaskets for vessels and process apparatus – Process 2003-08
apparatus flanged joints
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN 28040 (2013-09)
Flange joints for process vessels – Flat gaskets
28060 B0 2008-11 2) Brick-lined vessels and apparatus; Design and construction 1986-11
28080 HP 801 2002-05 5.1.2 Saddle supports for horizontal apparatus – Dimensions 2003-08
No. 34
S 3/2 2004-02 7
SUPERSEDING DOCUMENT:
DIN 28081-1 (2003-08)
Tubular supports for vessels – Dimensions
28081-2 S 3/3 2001-09 2 Vessel supports made of steel sections; Dimensions, material 1988-01
and design
28081-4 S 3/3 2001-09 2 Steel profile supports for vessels; Maximum permissible 1988-01
moments on the vessel wall due to profile support loads
28082-1 S 3/1 2001-09 8.2 Skirts for apparatus; Part 1: With simple bottom ring; 1994-07
Dimensions
28082-2 S 3/0 2007-11 4.3.4.3 Skirts for apparatus – Part 2: Bottom ring with bracket supports 1996-06
S 3/1 2001-09 8.2, 8.3 or twin ring with webs; Dimensions
28083-1 S 3/0 2007-11 2.5 Bracket supports; Dimensions and maximum loads 1987-01
S 3/4 2001-09 2, 7.1
28083-2 S 3/0 2007-11 2.5 Bracket supports; Maximum bending moments imposed on the 1987-01
vessel wall resulting from type A bracket support loads
28090-1 B7 2015-04 7.1.2.4 Static gaskets for flange connections – Part 1: Characteristic 1995-09
values and test procedures
SUPERSEDING DOCUMENT:
DIN EN 13555 (2014-07)
Flanges and their joints – Gasket parameters and test
procedures relevant to the design rules for gasketed circular
flange connections
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
28115 S 3/6 2001-09 1 Carbon steel nozzles – PN 10 to PN 40 2003-02
28120 A 404 2001-06 5.3 Circular sight glasses with case in main power connection 2004-06
28122 B5 2011-08 2.2 Blank flanges with stainless steel facing, of nominal sizes 2004-10
DN 125 to DN 500 and PN designations PN 10 to PN 40
28126 A5 2000-10 3.3.1 DN 125 bow closures for process equipment 1989-04
WITHDRAWN WITHOUT REPLACEMENT
SUPERSEDING DOCUMENT:
DIN 28183 (2007-09)
Tubular heat exchangers – Nomenclature
28184-1 B1 2000-10 1) Fixed head tubular heat exchangers with type 25 tubes and 1988-05
triangular 32 tube pitch; Number and pattern of tubes
SUPERSEDING DOCUMENT:
DIN 28184-1 (2009-01)
Tubular heat exchangers with two fixed heads – Part 1: Internal
AD 2000-Merkblatt
tube type 25, triangular tube pitch 32 – Number and pattern of
tubes
30670 HP 100 R 2007-11 7.4.2 Polyethylen coatings of steel pipes and fittings; 1991-04
HP 801 2004-02 7.1 Requirements and testing
No. 25
SUPERSEDING DOCUMENT:
30671 HP 100 R 2007-11 7.4.2 Thermoset plastic coatings for buried steel pipes 1992-06
HP 801 2004-02 7.1
No. 25 SUPERSEDING DOCUMENT:
DIN EN 10289 (2004-08)
Steel tubes and fittings for onshore and offshore pipelines –
External liquid applied epoxy and epoxy-modified coatings
DIN EN 10290 (2004-08)
Steel tubes and fittings for onshore and offshore pipelines –
External liquid applied polyurethane and polyurethane-modified
coatings
30673 HP 100 R 2007-11 7.4.2 Bitumen coatings and linings for steel pipes, fittings 1986-12
HP 801 2004-02 7.1 and vessels
No. 25
SUPERSEDING DOCUMENT:
DIN EN 10300 (2006-02)
Steel tubes and fittings for onshore and offshore pipelines –
Bituminous hot applied materials for external coating
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
50100 S2 2010-11 Annex 1 Testing of Materials; Continuous Vibration Test; Definitions, 1978-02
Symbols, Procedure, Evaluation
50104 W 6/2 2009-03 4.3.2 Testing of hollow bodies by internal pressure; Leak detection 1983-11
up to a certain pressure value; General specifications
SUPERSEDING DOCUMENT:
DIN EN ISO 7438 (2012-03)
Metallic materials – Bend test
50125 W8 2004-05 7.2.1.2 Testing of metallic materials – Tensile test pieces 2004-01
SUPERSEDING DOCUMENT:
DIN 50125 (2009-07)
Testing of metallic materials – Tensile test pieces
50162 W8 2004-05 7.3.2 Testing of clad steels; Determination of shear strength between 1978-09
cladding metal and parent metal in shear test
50916-1 W 6/2 2009-03 4.3.2 Testing of copper alloys; Stress corrosion cracking test in 1976-08
ammonia, testing of tubes, rods and profiles
AD 2000-Merkblatt
51220 N1 2014-06 2.2.4 Materials testing machines – Generals for requirements and for 2003-08
verification and calibration of materials testing machines
51524-1 A2 2015-04 12.1 Pressure fluids – Hydraulic oils – Part 1: HL hydraulic oils; 2006-04
Minimum requirements
51524-2 A2 2015-04 12.1 Pressure fluids – Hydraulic oils – Part 2: HLP hydraulic oils; 2006-04
Minimum requirements
DIN 51524-2 Corrigendum 1 (2006-09)
Pressure fluids – Hydraulic oils – Part 2: HLP hydraulic oils;
Minimum requirements
51622 HP 801 2004-02 2.3, Liquefied petroleum gases; Propane, propene, butane, butene 1985-12
No. 25 6.2.13 and their mixtures; Requirements
51914 N2 2000-10 Annex 3 Testing of carbon materials; Determination of tensile strength; 1985-04
Solid matters
SUPERSEDING DOCUMENT:
DIN 51914 (2009-05)
Testing of carbonaceous materials – Determination of tensile
strength – Solid materials
SUPERSEDING DOCUMENT:
DIN ISO 7884-8 (1998-02)
Glass – Viscosity and viscometric fixed points – Part 8:
Determination of (dilatometric) transformation temperature
AD-Mbl. DIN
DIN AD-Mbl. Clause Title
edition edition
52328 N4 2003-07 Table 1 Testing of glass; Determination of mean linear thermal 1985-03
expansion coefficient
SUPERSEDING DOCUMENT:
DIN ISO 7991 (1998-02)
Glass – Determination of coefficient of mean linear thermal
expansion
53598-1 N1 2006-05 4.4.6 Statistical evaluation at off-hand samples with examples 1983-07
from testing of rubbers and plastics
SUPERSEDING DOCUMENT:
DIN EN ISO 3452-2 (2014-03)
Non-destructive testing – Penetrant testing –
Part 2: Testing of penetrant materials
74281-1 A 5 App. 1 2000-10 2.4.5 Air breaking systems; Compressed air reservoirs; 1987-04
Welded steel single chamber compressed air reservoirs
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN 74281-1 (2000-09)
Air braking systems – Pressure vessels – Part 1: Measures of
welded steel and aluminium single chamber pressure vessels
DIN EN 286-2 (1992-11)
Simple unfired pressure vessels designed to contain air or
nitrogen; Part 2: Pressure vessels for air braking and auxiliary
systems for motor-vehicles and their trailers
2 DIN EN Standards
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
59 N1 2014-06 5.2.2 Glass Reinforced Plastics; Measurement of Hardness by 1977-11
Means of a Barcol Impressor
230 A 404 2001-06 7.2 Automatic burner control systems for oil burners 2005-10
298 A 404 2001-06 7.2 Automatic gas burner control systems for gas burners and gas 2004-01
burning appliances with or without fans
SUPERSEDING DOCUMENT:
DIN EN 298 (2012-11)
Automatic burner control systems for burners and appliances
burning gaseous or liquid fuels
378-1 A2 2010-09 10.4.2 Refrigerating systems and heat pumps – Safety and 2000-09
HP 801 2004-02 3.1 environmental requirements – Part 1: Basic requirements,
No. 14 definitions, classification and selection criteria
SUPERSEDING DOCUMENT:
DIN EN 378-1 (2012-08)
Refrigerating systems and heat pumps – Safety and
environmental requirements – Part 1: Basic requirements,
definitions, classification and selection criteria
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
378-2 HP 801 2004-02 3.1, 3.6, Refrigerating systems and heat pumps – Safety and 2000-09
No. 14 4.1, 4.8 environmental requirements – Part 2: Design, construction,
testing, marking and documentation
SUPERSEDING DOCUMENT:
DIN EN 378-2 (2012-08)
Refrigerating systems and heat pumps – Safety and
environmental requirements – Part 2: Design, construction,
testing, marking and documentation
378-3 HP 801 2004-02 3.1 Refrigerating systems and heat pumps – Safety and 2000-09
No. 14 environmental requirements – Part 3: Installation site and
personal protection
SUPERSEDING DOCUMENT:
DIN EN 378-3 (2012-08)
Refrigerating systems and heat pumps – Safety and
environmental requirements – Part 3: Installation site and
personal protection
378-4 HP 801 2004-02 3.1 Refrigerating systems and heat pumps – Safety and 2000-09
No. 14 environmental requirements – Part 4: Operation, maintenance,
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN EN 378-4 (2012-08)
Refrigerating systems and heat pumps – Safety and
environmental requirements – Part 4: Operation, maintenance,
repair and recovey
SUPERSEDING DOCUMENT:
DIN EN ISO 9712 (2012-12)
Non-destructive testing – Qualification and certification
of NDT personnel
485-1 W 6/1 2003-01 5.1.2 Aluminium and aluminium alloys; Sheet, strip and plate; 1994-01
Part 1: Technical conditions for inspection and delivery
SUPERSEDING DOCUMENT:
DIN EN 485-1 (2010-02)
Aluminium and aluminium alloys – Sheet, strip and plate –
Part 1: Technical conditions for inspection and delivery
485-2 W 6/1 2003-01 Table 3 Aluminium and aluminium alloys – Sheet, strip and plate – 2004-09
Part 2: Mechanical properties
SUPERSEDING DOCUMENT:
DIN EN 485-2 (2013-12)
Aluminium and aluminium alloys – Sheet, strip and plate –
Part 2: Mechanical properties
485-3 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Sheet, strip and plate – 2003-06
Part 3: Tolerances on dimensions and form for hot-rolled
products
485-4 W 6/1 2003-01 3.3 Aluminium and aluminium alloys; Sheet, strip and plate; 1994-01
Part 4: Tolerances on shape and dimensions for cold-rolled
products
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
571-1 HP 5/3 2011-05 7.2 Non-destructive testing – Penetrant testing – Part 1: General 1997-03
HP 5/3 2015-04 5 principles
App. 1
SUPERSEDING DOCUMENT:
DIN EN ISO 3452-1 (2014-09)
Non-destructive testing – Penetrant testing – Part 1: General
principles
573-3 HP 0 2011-05 Table 2a Aluminium and aluminium alloys – Chemical composition and 2003-10
W 6/1 2003-01 Table 1 form of wrought products – Part 3: Chemical composition
SUPERSEDING DOCUMENT:
DIN EN 573-3 (2013-12)
Aluminium and aluminium alloys – Chemical composition and
form of wrought products – Part 3: Chemical composition and
form of products
573-4 W 6/1 2003-01 Table 1 Aluminium and aluminium alloys – Chemical composition and 2004-05
form of wrought products – Part 4: Forms of products
SUPERSEDING DOCUMENT:
DIN EN 573-3 (2013-12)
AD 2000-Merkblatt
Aluminium and aluminium alloys – Chemical composition and
form of wrought products – Part 3: Chemical composition and
form of products
586-3 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Forgings – 2002-02
Part 3: Tolerances on dimensions and form
SUPERSEDING DOCUMENT:
DIN EN ISO 14731 (2006-12)
Welding coordination – Tasks and responsibilities
729-3 HP 0 2011-05 2) Quality requirements for welding – Fusion welding of metallic 1994-11
materials – Part 3: Standard quality requirements
SUPERSEDING DOCUMENT:
DIN EN ISO 3834-3 (2006-03)
Quality requirements for fusion welding for metallic materials –
Part 3: Standard quality requirements
754 HP 100 R 2007-11 5.2.1.4 Aluminium and aluminium alloys – Cold drawn rod/bar and tube
754-7 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Cold drawn rod/bar and 1998-10
tube – Part 7: Seamless tubes, tolerances on dimensions and
form
SUPERSEDING DOCUMENT:
DIN EN 754-7 (2008-06)
Aluminium and aluminium alloys – Cold drawn rod/bar and
tube – Part 7: Seamless tubes, tolerances on dimensions and
form
755 HP 100 R 2007-11 5.2.1.4 Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
755-1 W 6/1 2003-01 5.2.2 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1997-08
profiles – Part 1: Technical conditions for inspection and
delivery
SUPERSEDING DOCUMENT:
DIN EN 755-1 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 1: Technical conditions for inspection and
delivery
755-2 W 6/1 2003-01 5.2.2 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1997-08
profiles – Part 2: Mechanical properties
SUPERSEDING DOCUMENT:
DIN EN 755-2 (2013-12)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 2: Mechanical properties
755-3 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1995-08
profile – Part 3: Round bars; tolerances on dimensions and
form
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN EN 755-3 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 3: Round bars, tolerances on dimensions and
form
755-5 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1995-09
profiles – Part 5: Rectangular bars, tolerances on dimensions
and form
SUPERSEDING DOCUMENT:
DIN EN 755-5 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 5: Rectangular bars, tolerances on dimensions
and form
755-6 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1995-09
profiles – Part 6: Hexagonal bars, tolerances on dimensions
and form
SUPERSEDING DOCUMENT:
DIN EN 755-6 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 6: Hexagonal bars, tolerances on dimensions
and form
755-7 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1998-10
profiles – Part 7: Seamless tubes, tolerances on dimensions
and form
SUPERSEDING DOCUMENT:
DIN EN 755-7 (2009-07)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 7: Seamless tubes, tolerances on dimensions
and form
755-8 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 1998-10
profiles – Part 8: Porthole tubes, tolerances on dimensions and
form
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
755-8 SUPERSEDING DOCUMENT:
(continued)
DIN EN 755-8 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 8: Porthole tubes, tolerances on dimensions and
form
755-9 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Extruded rod/bar, tube and 2001-07
profiles – Part 9: Profiles, tolerances on dimensions and form
SUPERSEDING DOCUMENT:
DIN EN 755-9 (2008-06)
Aluminium and aluminium alloys – Extruded rod/bar, tube and
profiles – Part 9: Profiles, tolerances on dimensions and form
764 W 3/1 2000-10 1.3 Pressure equipment – Terminology and symbols – Pressure, 1994-11
W 3/3 2013-08 1.3 temperature, volume
SUPERSEDING DOCUMENT:
DIN EN 764-1 (2004-09)
Pressure equipment – Part 1: Terminology – Pressure,
temperature, volume, nominal size
AD 2000-Merkblatt
764-7 A2 2010-09 2) Pressure equipment – Part 7: Safety systems for unfired 2002-09
pressure equipment
875 HP 0 2011-05 4) to Table 1b Destructive tests on welds in metallic materials – Impact tests – 1995-10
Test specimen location, notch orientation and examination
SUPERSEDING DOCUMENT:
DIN EN ISO 9016 (2013-02)
Destructive tests on welds in metallic materials – Impact tests –
Test specimen location, notch orientation and examination
876 HP 0 2011-05 5)to Table 1b Destructive tests on welds in metallic materials – Longitudinal 1995-10
HP 801 2002-05 8.2 tensile test on weld metal in fusion welded joints
No. 34
SUPERSEDING DOCUMENT:
DIN EN ISO 5178 (2011-05)
Destructive tests on welds in metallic materials – Longitudinal
tensile test on weld metal in fusion welded joints
910 W5 2009-03 4.2 Destructive test on welds in metallic materials – Bend tests 1996-05
SUPERSEDING DOCUMENT:
DIN EN ISO 5173 (2012-02)
Destructive tests on welds in metallic materials – Bend tests
941 W 6/1 2003-01 3.3 Aluminium and aluminium alloys – Circle and circle stock for 1995-09
general applications – Specifications
SUPERSEDING DOCUMENT:
DIN EN 941 (2014-07)
Aluminium and aluminium alloys – Circle and circle stock for
the production of general applications – Specifications
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
1011 HP 1 2009-10 2 Welding – Recommendations for welding of metallic materials 2009-06
(Parts 1 to 8)
1043-1 HP 801 2002-05 8.2 Destructive test on welds in metallic materials – Hardness 1996-02
No. 34 testing – Part 1: Hardness test on arc welded joints
SUPERSEDING DOCUMENT:
DIN EN ISO 9015-1 (2011-05)
Destructive tests on welds in metallic materials – Hardness
testing – Part 1: Hardness test on arc welded joints
1057 HP 100 R 2007-11 5.2.1.3, Copper and copper alloys – Seamless, round copper tubes for 2006-08
5.2.4.1, water and gas in sanitary and heating applications
7.3.1,
7.4.1 SUPERSEDING DOCUMENT:
W 6/2 2009-03 3.1, DIN EN 1057 (2010-06)
Table 1 Note Copper and copper alloys – Seamless, round copper tubes for
water and gas in sanitary and heating applications
1092-1 B8 2015-04 8.2, Table 3 Flanges and their joints – Circular flanges for pipes, valves, 2007-11
HP 100 R 2007-11 5.4.1.1 fittings and accessories, PN designated – Part 1: Steel flanges
SUPERSEDING DOCUMENT:
AD 2000-Merkblatt
1092-4 HP 100 R 2007-11 5.4.1.1 Flanges and their joints – Circular flanges for pipes, valves, 2002-08
fittings and accessories, PN designated – Part 4: Aluminium
alloy flanges
1254-1 HP 100 R 2007-11 5.3.1.1, Copper and copper alloys – Plumbing fittings – Part 1: Fittings 1998-03
6.2.1.3, with ends for capillary soldering or capillary brazing to copper
7.3.1 tubes
1254-4 HP 100 R 2007-11 6.2.1.3, Copper and copper alloys – Plumbing fittings – Part 4: Fittings 1998-03
7.3.1 combining other end connections with capillary or compression
ends
1290 HP 5/3 2011-05 7.1 Non-destructive testing of welds – Magnetic particle testing of 2002-09
welds
SUPERSEDING DOCUMENT:
DIN EN ISO 17638 (2010-03)
Non-destructive testing of welds – Magnetic particle testing
1371-1 A4 2013-08 Table 12) Founding – Liquid penetrant inspection – Part 1: Sand, gravity 1997-10
W5 2009-03 Table 12) die and low pressure die castings
SUPERSEDING DOCUMENT:
DIN EN 1371-1 (2012-02)
Founding – Liquid penetrant testing – Part 1: Sand, gravity die
and low pressure die castings
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
1371-2 A4 2013-08 Table 12) Founding – Liquid penetrant inspection – Part 2: Investment 1998-07
W5 2009-03 Table 12) castings
1435 HP 5/3 2011-05 7.4 Non-destructive testing of welds – Radiographic testing of 2002-09
W5 2009-03 5.6 welded joints
SUPERSEDING DOCUMENT:
DIN EN ISO 17636-1 (2013-05)
Non-destructive testing of welds – Radiographic testing –
Part 1: X- and gamma-ray techniques with film
DIN EN ISO 17636-2 (2013-05)
Non-destructive testing of welds – Radiographic testing –
Part 2: X- and gamma-ray techniques with digital detectors
1515-1 B7 2015-04 2.3.2 Flanges and their joints – Bolting – Part 1: Selection of bolting 2000-01
1515-2 B7 2015-04 2.3.2 Flanges and their joints – Bolting – Part 2: Classification of bolt 2002-03
materials for steel flanges, PN designated
1515-3 B7 2015-04 2.3.2 Flanges and their joints – Bolting – Part 3: Classification of bolt 2005-12
materials for steel flanges, Class designated
AD 2000-Merkblatt
1515-4 B7 2015-04 2.3.2 2010-04
B8 2015-04 8.2 for equipment subject to the Pressure Equipment Directive
97/23/EC
1559-1 W 3/1 2000-10 3.2, 4.1, Founding – Technical conditions of delivery – Part 1: General 1997-08
1)
W5 2009-03 3.1 SUPERSEDING DOCUMENT:
DIN EN 1559-1 (2011-05)
Founding – Technical conditions of delivery – Part 1: General
1591-1 B8 2015-04 2.4.2, 8.3 Flanges and their joints – Design rules for gasketed circular 2001-10
flange connections – Part 1: Calculation method
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
1591-1 SUPERSEDING DOCUMENT:
(continued)
DIN EN 1591-1 (2014-04)
Flanges and their joints – Design rules for gasketed circular
flange connections – Part 1: Calculation
1591-4 B8 2015-04 2.5 Flanges and their joints – Part 4: Qualification of personnel 2013-12
competency in the assembly of the bolted connections of
critical service pressurized systems
1652 W 6/2 2009-03 3.1, Copper and copper alloys – Plate, sheet, strip and circles 1998-03
Table 1 Note, for general purposes
Table 2,
1) to Table 6
1653 W 6/2 2009-03 3.1, Copper and copper alloys – Plate, sheet and circles 2000-11
Table 1 Note, for boilers, pressure vessels and hot water storage units
Table 2, (includes Amendment A1:2000)
2) to Table 6
S 3/3 2001-09 2
S 3/4 2001-09 2
DIN EN 1708-1 (2010-05)
Welding – Basic welded joint details in steel –
Part 1: Pressurized components
1736 HP 801 2004-02 4.7 Refrigerating systems and heat pumps – Flexible pipe 2000-04
No. 14 elements, vibration isolators and expansion joints –
Requirements, design and installation
SUPERSEDING DOCUMENT:
DIN EN 1736 (2009-02)
Refrigerating systems and heat pumps – Flexible pipe
elements, vibration isolators, expansion joints and non-metallic
tubes – Requirements, design and installation
1759-1 B7 2015-04 2.2.3 Flanges and their joints – Circular flanges for pipes, valves, 2005-02
B8 2015-04 Table 3 fittings and accessories, Class designated – Part 1: Steel
flanges, NPS ½ to 24
1763-1 HP 801 2004-02 5.2 Rubber and plastics tubing, hoses and assemblies for use 2001-04
No. 25 with commercial propane, commercial butane and their mixture
in the vapour phase – Part 1: Requirements for rubber and
plastics tubing and hoses
WITHDRAWN WITHOUT REPLACEMENT
1998-4 S 3/0 2013-02 4.1.4.9, 5 Eurocode 8: Design of structures for earthquake resistance – 2007-01
Part 4: Silos, tanks and pipelines
10002-1 HP 8/3 2010-02 5.1.2 Metallic materials – Tensile testing – Part 1: Method of testing 2001-12
S6 2014-06 4.3.2.1, at ambient temperature
4.3.2.2
SUPERSEDING DOCUMENT:
DIN EN ISO 6892-1 (2009-12)
Metallic materials – Tensile testing – Part 1: Method of test at
room temperature
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10002-5 HP 0 2011-05 5)to Table 1b Tensile testing of metallic materials; Method of testing 1992-02
HP 8/3 2010-02 5.1.2 at elevated temperature
SUPERSEDING DOCUMENT:
DIN EN ISO 6892-2 (2011-05)
Metallic materials – Tensile testing – Part 2: Method of test
at elevated temperature
10021 HP 8/2 2014-11 5.1.3 General technical delivery conditions for steel products 2007-03
W 13 2008-11 3.15
10025 HP 801 2002-05 3.1.3 Hot rolled products of non-alloy structural steels; Technical 1994-03
No. 34 delivery conditions (includes Amendment A1:1993)
SUPERSEDING DOCUMENT:
DIN EN 10025-1 (2005-02)
Hot rolled products of structural steels – Part 1: General
technical delivery conditions
DIN EN 10025-2 (2005-04)
Hot rolled products of structural steels – Part 2: Technical
delivery conditions for non-alloy structural steels
AD 2000-Merkblatt
10025-1 W1 2006-07 3.1 Hot rolled products of structural steels – Part 1: General 2005-02
technical delivery conditions
10025-2 HP 0 2011-05 Table 1a Hot rolled products of structural steels – Part 2: Technical 2005-04
HP 8/1 2013-02 3.4, delivery conditions for non-alloy structural steels
Table 1,
Table 2
HP 8/2 2014-11 3.3
W1 2006-07 3.1, 6.1,
Table 1,
Table 3,
Table 4,
Table 5
W 13 2008-11 2.2, 3.2, 3.12,
5.1.1, 5.1.2, 6.2,
Table 1,
1) to Table 1,
Table 3
10027-1 W 13 2008-11 Table 1, Designation systems for steels – Part 1: Steel names 2005-10
Table 2
10027-2 W 13 2008-11 Table 1, Designation systems for steel; Numerical system 1992-09
Table 2
10028-1 HP 801 2002-05 4.1 Flat products made of steels for pressure purposes – 2003-09
No. 30 Part 1: General requirements (includes Amendment A1:2002)
W1 2006-07 5.2,
Table 2 SUPERSEDING DOCUMENT:
W2 2008-02 2)
DIN EN 10028-1 (2009-07)
Flat products made of steels for pressure purposes –
Part 1: General requirements
10028-2 HP 0 2011-05 Table 1a Flat products made of steels for pressure purposes – 2003-09
HP 8/1 2001-09 Table 1 Part 2: Non-alloy and alloy steels with specified elevated
S1 2005-02 1) temperature properties
W1 2006-07 2.3, 3.3,
5.2, 6.3, SUPERSEDING DOCUMENT:
Table 3
DIN EN 10028-2 (2009-09)
Flat products made of steels for pressure purposes –
Part 2: Non-alloy and alloy steels with specified elevated
temperature properties
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10028-3 HP 0 2011-05 Table 1a Flat products made of steels for pressure purposes – 2003-09
HP 5/3 2011-05 Table 1 Part 3: Weldable fine grain steels, normalized
HP 7/2 2009-03 2.2
HP 8/1 2001-09 Table 1 SUPERSEDING DOCUMENT:
HP 801 2002-05 4.1
DIN EN 10028-3 (2009-09)
No. 30
Flat products made of steels for pressure purposes –
W1 2006-07 2.4, 3.4, 6.4,
Part 3: Weldable fine grain steels, normalized
Table 3
W 10 2007-11 Table 1
10028-4 HP 0 2011-05 Table 1a Flat products made of steels for pressure purposes – 2003-09
HP 7/2 2009-03 2.2 Part 4: Nickel alloyed steels with specified low temperature
HP 8/1 2013-02 Table 1 properties
W1 2006-07 2.5, 3.5,
6.5, SUPERSEDING DOCUMENT:
Table 3
DIN EN 10028-4 (2009-09)
W 10 2007-11 6,
Flat products made of steels for pressure purposes –
Table 1,
Part 4: Nickel alloy steels with specified low temperature
Table 3a
properties
10028-6 S1 2005-02 1), Flat products made of steels for pressure purposes – 2003-10
Figure A 1 Part 6: Weldable fine grain steels, quenched and tempered
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN EN 10028-6 (2009-09)
Flat products made of steels for pressure purposes –
Part 6: Weldable fine grain steels, quenched and tempered
10028-7 HP 0 2011-05 Table 1a Flat products made of steels for pressure purposes – 2000-06
HP 8/1 2013-02 8.3 Part 7: Stainless steels
W2 2008-02 2.1, 3.1,
4, 6.5, SUPERSEDING DOCUMENT:
Table 1a,
DIN EN 10028-7 (2008-02)
Table 1b,
Flat products made of steels for pressure purposes –
Table 1c,
3) to Table 7
Part 7: Stainless steels
10029 B0 2014-06 9.1.1 Hot rolled steel plates 3 mm thick or above; 1991-10
Tolerances on dimensions, shape and mass
SUPERSEDING DOCUMENT:
DIN EN 10029 (2011-02)
Hot-rolled steel plates 3 mm thick or above –
Tolerances on dimensions and shape
10045-1 HP 801 2004-02 4.3 Charpy impact test on metallic materials; 1991-04
No. 14 Part 1: Test method
W1 2006-07 2.6
W 3/2 2000-10 3.2
W5 2009-03 2.5, 2.7
10160 B5 2011-08 2)to Table 1 Ultrasonic testing of steel flat product of thickness 1999-09
B8 2015-04 2.2.2 equal to or greater than 6 mm (reflection method)
W9 2010-11 4.3.2.1, 4.3.3
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10204 A4 2013-08 4.3.1, 5.2.2, Metallic products – Types of inspection documents 2005-01*
6.4.2, 6.5.1,
6.5.3
HP 0 2011-05 4.2.1, 4.2.2,
4.2.3, 1)
HP 8/1 2001-09 6, 8, Annex 1
HP 8/2 2000-10 6, 8
HP 8/3 2010-02 7.1, 7.2,
Table 3
HP 100 R 2007-11 4.1,
5.2.4.1,
5.3.3,
5.4.2,
5.6.1,
Table 1
HP 110 R 2001-06 5.2.4
HP 120 R 2001-06 App. 1
N1 2006-05 3.2.4, 3.8,
5.2.1.3
N2 2000-10 6.2,
Annex 1
S 3/0 2007-11 2.8** 1995**
W0 2006-07 3.1.2, 3.4.2,
AD 2000-Merkblatt
3.4.3
W1 2006-07 4.1,
5.1, 5.2,
Table 3
W2 2008-02 5.2, 6.1.2,
6.2.1, 6.3.2,
6.3.4, 6.3.5,
6.4.1, 6.4.2,
6.4.3, 6.4.4,
6.5, 6.6,
Table 2a,
Table 2b,
Table 2c,
Table 3a,
W2 2008-02 Table 3b,
Table 3c
W 3/1 2000-10 6, 6.1, 6.2
W 3/2 2000-10 6
W 3/3 2013-08 6
W4 2008-05 2.2, 5.3,
7.2,
Table 1a,
Table 1b,
Table 2a,
Table 2b
W5 2009-03 5.7, 6, 7.1, 7.2,
7.3, 7.5, 7.6
W 6/1 2003-01 7
W 6/2 2009-03 6.1, 6.2,
6.3, 6.4,
6.5, 6.6
W7 2008-05 6.1.1,
6.1.2,
6.1.4, 6.2.1,
6.2.2, 6.3.1,
6.3.3, 6.3.4*,
6.4,
Table 2
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10204 W8 2004-05 9.1, 9.2,
(continued) 9.3
W9 2010-11 Table 2,
5, 6, 6.1, 6.2,
6.4.1, 6.4.2,
Annex
W 12 2003-07 6.2,
Table 1,
Table 2,
Table 3,
Table 4
W 13 2008-11 4.1, 5.1, 5.2
10207 HP 0 2011-05 Table 1a Steels for simple pressure vessels – Technical delivery 2005-06
HP 8/2 2014-11 3.3 requirements for plates, strips and bars
W1 2006-07 2.2, 3.2,
6.2,
Table 1,
Table 3
W 13 2008-11 2.3,
Table 1,
3.3, 3.12,
6.3
AD 2000-Merkblatt
10208-2 HP 100 R 2007-11 5.2.1.1 Steel pipes for pipelines for combustible fluids – Technical 1996-08
delivery conditions – Part 2: Pipes of requirements class B
SUPERSEDING DOCUMENT:
DIN EN ISO 3183 (2013-03)
Petroleum and natural gas industries – Steel pipe for pipeline
transportation systems
10213 HP 0 2013-02 Table 1a Steel castings for pressure purposes + Corrigendum 1 2008-01
W5 2009-03 2.2, 2.3, 2.6, + 2008-11
4.1, 4.2, 5.7,
7.6, 8.2, 8.4
10213-3 W 10 2007-11 6, 8.3, Technical delivery conditions for steel castings for pressure 1996-01
Table 3c purposes – Part 3: Steel grades for use at low temperatures
SUPERSEDING DOCUMENT:
DIN EN 10213 (2008-01)
Steel castings for pressure purposes
DIN EN 10213 Corrigendum 1 (2008-11)
Steel castings for pressure purposes
10216-1 HP 0 2011-05 Table 1a Seamless steel tubes for pressure purposes – Technical 2004-07
W4 2008-05 2.1.1, delivery conditions – Part 1: Non-alloy steel tubes with
Table 1a, specified room temperature properties
Table 1b,
Table 3, SUPERSEDING DOCUMENT:
Table A 1
DIN EN 10216-1 (2014-03)
Seamless steel tubes for pressure purposes – Technical
delivery conditions – Part 1: Non-alloy steel tubes with
specified room temperature properties
10216-2 HP 0 2011-05 Table 1a Seamless steel tubes for pressure purposes – Technical 2007-10
S6 2014-06 Table 2, delivery conditions – Part 2: Non alloy and alloy steel tubes
Annex 1 with specified elevated temperature properties
Annex 2
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10216-2 W4 2008-05 2.1.2, 3.2, SUPERSEDING DOCUMENT:
(continued) 5.2, 6.2,
Table 1a, DIN EN 10216-2 (2014-03)
Table 1b, Seamless steel tubes for pressure purposes – Technical
Table 3, delivery conditions – Part 2: Non-alloy and alloy steel tubes
Table A 2 with specified elevated temperature properties
W 12 2014-06 6.3
10216-3 HP 0 2011-05 Table 1a Seamless steel tubes for pressure purposes – Technical 2004-07
HP 7/2 2009-03 2.2 delivery conditions – Part 3: Alloy fine grain steel tubes
W4 2008-05 2.1.4, 3.3,
Table 1a, SUPERSEDING DOCUMENT:
Table 1b,
DIN EN 10216-3 (2014-03)
Table 3
Seamless steel tubes for pressure purposes – Technical
W 10 2007-11 Table 1
delivery conditions – Part 3: Alloy fine grain steel tubes
10216-4 HP 0 2011-05 Table 1a Seamless steel tubes for pressure purposes – Technical 2004-07
HP 7/2 2009-03 2.2 delivery conditions – Part 4: Non-alloy and alloy steel tubes
W4 2008-05 2.1.3, 6.4, with specified low temperature properties
Table 1a,
Table 1b, SUPERSEDING DOCUMENT:
Table 3
DIN EN 10216-4 (2014-03)
W 10 2007-11 6,
AD 2000-Merkblatt
Seamless steel tubes for pressure purposes – Technical
Table 1,
delivery conditions – Part 4: Non-alloy and alloy steel tubes
Table 3a
with specified low temperature properties
10216-5 HP 0 2011-05 Table 1a Seamless steel tubes for pressure purposes – Technical 2004-11
W2 2008-02 3.1, 4, delivery conditions – Part 5: Stainless steel tubes
4.2.2,
4.2.2.1, SUPERSEDING DOCUMENT:
4.2.2.2,
DIN EN 10216-5 (2014-03)
4.2.2.3,
Seamless steel tubes for pressure purposes – Technical
6.2.2,
delivery conditions – Part 5: Stainless steel tubes
Table 1a,
Table 1b,
Table 1c
W 10 2007-11 Table 1
10217-1 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
W4 2008-05 2.2.1, conditions – Part 1: Non-alloy steel tubes with specified room
Table 2a, temperature properties
Table 2b,
Table 3,
Table A 1
10217-2 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
W4 2008-05 2.2.2, 6.3, conditions – Part 2: Electric welded non-alloy and alloy steel
7.3.1, 7.3.2, tubes with specified elevated temperature properties
Table 2a,
Table 2b,
Table 3,
Table A 2
10217-3 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
HP 7/2 2009-03 2.2 conditions – Part 3: Alloy fine grain steel tubes
W4 2008-05 2.2.6, 3.7,
Table 2a,
Table 2b,
Table 3
W 10 2007-11 Table 1
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10217-4 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
HP 7/2 2009-03 2.2 conditions – Part 4: Electric welded non-alloy steel tubes with
W4 2008-05 2.2.4, 6.4, specified low temperature properties
Table 2a,
Table 2b,
Table 3
W 10 2007-11 6,
Table 1,
Table 3a
10217-5 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
W4 2008-05 2.2.3, 6.3, conditions – Part 5: Submerged arc welded non-alloy and alloy
7.3.1, 7.3.2, steel tubes with specified elevated temperature properties
Table 2a,
Table 2b,
Table 3,
Table A 2
10217-6 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-04
W4 2008-05 2.2.5, 6.4, conditions – Part 6: Submerged arc welded non-alloy steel
Table 2a, tubes with specified low temperature properties
Table 2b,
Table 3
AD 2000-Merkblatt
W 10 2007-11 6,
Table 1,
Table 3a
10217-7 HP 0 2011-05 Table 1a Welded steel tubes for pressure purposes – Technical delivery 2005-05
W2 2008-02 3.1, 3), 3.4, 4, conditions – Part 7: Stainless steel tubes
4.2.1,
4.2.1.1,
4.2.1.2,
4.2.1.3,
4.2.1.4,
6.2.2,
Table 1a,
Table 1b,
Table 1c
W 10 2007-11 Table 1
10220 HP 801 2004-02 4.9.1 Seamless and welded steel tubes – Dimensions and masses 2003-03
No. 14 per unit length
10222-1 S2 2010-11 7.1.3 Steel forgings for pressure purposes – Part 1: General require- 2002-07
W2 2008-02 4, 4.3.1, ments for open die forgings (includes Amendment A1:2002)
1) to Tables
3a, 3b and 3c
W 13 2008-11 3.1, 3.5, 3.6,
3.8
10222-2 HP 0 2011-05 Table 1a Steel forgings for pressure purposes – Part 2: Ferritic and 2000-04
S6 2014-06 Annex 1 martensitic steels with specified elevated temperature
W9 2010-11 2.1.3, 6.2, 7.1 properties (including Corrigendum AC:2000)
W 13 2008-11 2.6, 3.6, 5.1.2,
5.2.1, 6.6,
Table 2
10222-3 HP 0 2011-05 Table 1a Steel forgings for pressure purposes – Part 3: Nickel steels 1999-02
W9 2010-11 2.1.4, 7.1 with specified low temperature properties
W 10 2007-11 6,
Table 1,
Table 3a
W 13 2008-11 2.8, 3.6,
3.8, 6.8,
Table 2
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10222-4 HP 0 2011-05 Table 1a Steel forgings for pressure purposes – Part 4: Weldable fine 2001-12
W9 2010-11 2.1.2, grain steels with high proof strength (includes Amendment
6.2, 7.1, A1:2001)
Table 5
W 13 2008-11 2.5, 3.5,
Table 2,
Table 3,
5.1.2, 6.5
10222-5 HP 0 2011-05 Table 1a Steel forgings for pressure purposes – Part 5: Martensitic, 2000-02
W2 2008-02 2.1, 3.1, austenitic and austenitic-ferritic stainless steels
3.5,
Table 1a,
Table 1b,
Table 1c
10228-3 HP 8/3 2010-02 5.1.2 Non-destructive testing of steel forgings – Part 3: Ultrasonic 1998-07
W9 2010-11 4.2.1, 4.3.4 testing of ferritic or martensitic steel forgings
W 12 2014-06 4.8
W 13 2008-11 3.11
10228-4 HP 8/3 2010-02 5.1.2 Non-destructive testing of steel forgings – Part 4: Ultrasonic 1999-10
W2 2008-02 5) testing of austenitic and austenitic-ferritic stainless steel
AD 2000-Merkblatt
W9 2010-11 4.3.1 forgings
10233 W 6/1 2003-01 5.2.4 Metallic materials; Tube; Flattening test 1994-01
SUPERSEDING DOCUMENT:
DIN EN ISO 8492 (2014-03)
Metallic materials – Tube – Flattening test
10236 W 6/1 2003-01 5.2.4 Metallic materials; Tube; Ring expanding test 1994-01
SUPERSEDING DOCUMENT:
DIN EN ISO 8495 (2014-03)
Metallic materials – Tube – Ring-expanding test
10237 W 6/1 2003-01 5.2.4 Metallic materials; Tube; Ring tensile test 1994-01
SUPERSEDING DOCUMENT:
DIN EN ISO 8496 (2014-03)
Metallic materials – Tube – Ring tensile test
10246-7 W2 2008-02 4.2.2.3 Non-destructive testing of steel tubes – Part 7: Automatic full 2005-12
peripheral ultrasonic testing of seamless and welded (except
submerged arc welded) tubes for the detection of longitudinal
imperfections
SUPERSEDING DOCUMENT:
DIN EN ISO 10893-10 (2011-07)
Non-destructive testing of steel tubes – Part 10: Automated
full peripheral ultrasonic testing of seamless and welded
(except submerged arc-welded) steel tubes for the detection
of longitudinal and/or transverse imperfections
10250-1 W 13 2008-11 3.1 Open die steel forgings for general engineering purposes – 1999-12
Part 1: General requirements
10250-2 HP 0 2011-05 Table 1a Open die steel forgings for general engineering purposes – 1999-12
W9 2010-11 2.1.1, 4.2.1, Part 2: Non-alloy quality and special steels
7.1,
Table 5
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10250-2 W 13 2008-11 2.1, 3.1, 5.1.1,
(continued) 5.1.2,
Table 1,
Table 3,
6.1
10253-2 HP 8/3 2010-02 1, 4.1, 4.2, Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy 2008-09
4.3, 4.4, 5.1.1, steels with specific inspection requirements
5.1.2, Table 2,
5.2.5, 5.2.5.3, 6
10253-4 HP 8/3 2010-02 1, 4.1, 4.2, Butt-welding pipe fittings – Part 4: Wrought austenitic and 2008-06
4.3, 4.4, 5.1.1, austenitic-ferritic (duplex) stainless steels with specific
5.1.2, 5.2.5, inspection requirements
5.2.5.3, 6
10269 B8 2015-04 Table 3 Steels and nickel alloys for fasteners with specified elevated 2006-07
HP 0 2011-05 Table 1a and/or low temperature properties
HP 100 R 2007-11 5.4.1.1
W2 2008-02 2.1, 2.3, 3.1, SUPERSEDING DOCUMENT:
4, 7.1,
DIN EN 10269 (2014-02)
Table 1a,
Steels and nickel alloys for fasteners with specified elevated
Table 1b,
and/or low temperature properties
AD 2000-Merkblatt
Table 1c,
4) to Tables 3a
and 3b
W7 2008-05 2.2, 2.3,
3.1, 3.4,
4.3, 7.2,
Table 2,
Annex 1
W 10 2007-11 6,
Table 1,
Table 3a
10272 HP 0 2011-05 Table 1a Stainless steel bars for pressure purposes 2001-01
W2 2008-02 2.1, 2.3, 2.5,
3.1, 3.5, 4, SUPERSEDING DOCUMENT:
Table 1a,
DIN EN 10272 (2008-01)
Table 1b,
Stainless steel bars for pressure purposes
Table 1c
10273 HP 0 2011-05 Table 1a Hot rolled weldable steel bars for pressure purposes 2008-02
W9 2010-11 2.1.2, with specified elevated temperature properties
2.1.3,
6.2, 7.1
W 13 2008-11 2.7, 3.7,
3.12,
5.1.2, 6.7,
Table 2
10293 HP 0 2013-02 Table 1a Steel castings for general engineering uses 2005-06
W5 2009-03 2.1
10305-1 HP 100 R 2007-11 7.4.1 Steel tubes for precision applications – Technical delivery 2003-02
conditions – Part 1: Seamless cold drawn tubes
SUPERSEDING DOCUMENT:
DIN EN 10305-1 (2010-05)
Steel tubes for precision applications – Technical delivery
conditions – Part 1: Seamless cold drawn tubes
10305-2 HP 100 R 2007-11 7.4.1 Steel tubes for precision applications – Technical delivery 2003-02
conditions – Part 2: Welded cold drawn tubes
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
10305-2 SUPERSEDING DOCUMENT:
(continued)
DIN EN 10305-2 (2010-05)
Steel tubes for precision applications – Technical delivery
conditions – Part 2: Welded cold drawn tubes
10305-4 W4 2008-05 2.1.5, Steel tubes for precision applications – Technical delivery 2003-10
Table 1a, conditions – Part 4: Seamless cold drawn tubes for hydraulic
Annex 1, and pneumatic power systems
Table A 3
SUPERSEDING DOCUMENT:
DIN EN 10305-4 (2011-04)
Steel tubes for precision applications – Technical delivery
conditions – Part 4: Seamless cold drawn tubes for hydraulic
and pneumatic power systems
10308 A4 2013-08 6.3.1 Non-destructive testing – Ultrasonic testing of steel bars 2002-03
W9 2010-11 4.3.4
W 13 2008-11 3.11
AD 2000-Merkblatt
12163 W 6/2 2009-03 3.1, Copper and copper alloys – Rod for general purposes 1998-04
Table 1 Note
SUPERSEDING DOCUMENT:
DIN EN 12163 (2011-08)
Copper and copper alloys – Rod for general purposes
12164 W 6/2 2009-03 3.1, Copper and copper alloys – Rod for free machining purposes 2000-09
Table 1 Note
SUPERSEDING DOCUMENT:
DIN EN 12164 (2011-08)
Copper and copper alloys – Rod for free machining purposes
12165 W 6/2 2009-03 3.1, 6.5, Copper and copper alloys – Wrought and unwrought forging 1998-04
Table 1 Note stock
SUPERSEDING DOCUMENT:
DIN EN 12165 (2011-08)
Copper and copper alloys – Wrought and unwrought forging
stock
12167 W 6/2 2009-03 3.1, Copper and copper alloys – Profiles and rectangular bars for 1998-04
Table 1 Note general purposes
SUPERSEDING DOCUMENT:
DIN EN 12167 (2011-08)
Copper and copper alloys – Profiles and bars for general
purposes
12178 HP 801 2004-02 4.9.2 Refrigerating systems and heat pumps – Liquid level indicating 2004-02
No. 14 devices – Requirements, testing and marking
12266-1 A4 2013-08 6.1 Industrial valves – Testing of metallic valves – Part 1: Pressure 2012-06
tests, test procedures and acceptance criteria – Mandatory
requirements
12300 A2 2010-09 12.3 Cryogenic vessels – Cleanliness for cryogenic service 2006-09
12420 W 6/2 2009-03 3.1, Copper and copper alloys – Forgings 1999-03
Table 1 Note
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
12449 HP 100 R 2007-11 5.2.1.3 Copper and copper alloys – Seamless, round tubes 1999-10
W 6/2 2009-03 3.1, for general purposes
Table 1 Note
SUPERSEDING DOCUMENT:
DIN EN 12449 (2012-07)
Copper and copper alloys – Seamless, round tubes
for general purposes
12451 HP 100 R 2007-11 5.2.1.3 Copper and copper alloys – Seamless, round tubes 1999-10
W 6/2 2009-03 3.1, 4.3.2, for heat exchangers
Table 1 Note
SUPERSEDING DOCUMENT:
DIN EN 12451 (2012-08)
Copper and copper alloys – Seamless, round tubes
for heat exchangers
12452 W 6/2 2009-03 3.1, Copper and copper alloys – Rolled, finned, seamless tubes 1999-10
Table 1 Note for heat exchangers
SUPERSEDING DOCUMENT:
DIN EN 12452 (2012-08)
Copper and copper alloys – Rolled, finned, seamless tubes
AD 2000-Merkblatt
12516-2 A4 2013-08 5.1 Industrial valves – Shell design strength – Part 2: Calculation 2004-10
method for steel valve shells
12680-2 A4 2013-08 Table 15) Founding – Ultrasonic examination – Part 2: Steel castings 2003-06
W5 2009-03 Table 15) for highly stressed components
W9 2010-11 4.3.5
12735-1 W 6/2 2009-03 3.1, Copper and copper alloys – Seamless, round copper tubes 2005-06
Table 1 Note for air conditioning and refrigeration – Part 1: Tubes for piping
systems
SUPERSEDING DOCUMENT:
DIN EN 12735-1 (2010-12)
Copper and copper alloys – Seamless, round copper tubes
for air conditioning and refrigeration – Part 1: Tubes for piping
systems
12735-2 W 6/2 2009-03 3.1 Copper and copper alloys – Seamless, round copper tubes 2005-07
for air conditioning and refrigeration – Part 2: Tubes for
equipment
SUPERSEDING DOCUMENT:
DIN EN 12735-2 (2010-12)
Copper and copper alloys – Seamless, round copper tubes for
air conditioning and refrigeration – Part 2: Tubes for equipment
12952-3 S6 2014-06 5.2.3 Water-tube boilers and auxiliary installations – Part 3: Design 2012-03
and calculation for pressure parts of the boiler
SUPERSEDING DOCUMENT:
DIN EN 12952-4 (2011-10)
Water-tube boilers and auxiliary installations –
Part 4: In-service boiler life expectancy calculations
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
13121 N1 2014-06 1 GRP tanks and vessels for use above ground
13121-2 N1 2014-06 4.4.4 GRP tanks and vessels for use above ground – 2004-01
Part 2: Composite materials – Chemical resistance
13121-3 N1 2014-06 4.5.7, 4.4.1 GRP tanks and vessels for use above ground – 2010-06
Part 3: Design and workmanship
13136 HP 801 2004-02 3.4 Refrigerating systems and heat pumps – Pressure relief 2005-12
No. 14 devices and their associated piping – Methods for calculation
13348 W 6/2 2009-03 3.1, Copper and copper alloys – Seamless, round copper tubes 2005-06
Table 1 Note for medical gases or vacuum
SUPERSEDING DOCUMENT:
AD 2000-Merkblatt
DIN EN 13348 (2008-11)
Copper and copper alloys – Seamless, round copper tubes
for medical gases or vacuum
SUPERSEDING DOCUMENT:
DIN EN 13445-2 (2013-12)
Unfired pressure vessels – Part 2: Materials
13480-2 HP 100 R 2007-11 5.1 Metallic industrial piping – Part 2 : Materials 2002-08
SUPERSEDING DOCUMENT:
DIN EN 13480-2 (2013-11)
Metallic industrial piping – Part 2: Materials
13480-3 HP 100 R 2007-11 6.1 Metallic industrial piping – Part 3: Design and calculation 2002-08
SUPERSEDING DOCUMENT:
DIN EN 13480-3 (2013-11)
Metallic industrial piping – Part 3: Design and calculation
13555 B7 2015-04 7.1.2.4 Flanges and their joints – Gasket parameters and test 2014-07
B8 2015-04 2.4.3 procedures relevant to the design rules for gasketed circular
flange connections
13835 W 3/3 2013-08 2.1, 3.1, Founding – Austenitic cast irons 2012-04
3.1.2,
Table 1,
3.2, 4.1,
5, Table 3
AD-Mbl. DIN
DIN EN AD-Mbl. Clause Title
edition edition
14382 A2 2015-04 13 Safety devices for gas pressure regulating stations and 2009-07
installations – Gas safety shut-off devices for inlet pressures
up to 100 bar
14917 B 13 2010-02 7 Metal bellows expansion joints for pressure applications E 2004-10
SUPERSEDING DOCUMENT:
DIN EN 14917 (2012-06)
Metal bellows expansion joints for pressure applications
20898-2 HP 100 R 2007-11 5.4.1.1 Mechanical properties of fasteners; Part 2: Nuts with 1994-02
specified proof load values; Coarse thread
SUPERSEDING DOCUMENT:
DIN EN ISO 898-2 (2012-08)
Mechanical properties of fasteners made of carbon steel
and alloy steel – Part 2: Nuts with specified property classes –
Coarse thread and fine pitch thread
25817 HP 801 2002-05 5.2.1.7 Arc-welded joints in steel; Guidance on quality levels 1992-09
No. 34 for imperfections
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
DIN EN ISO 5817 (2014-06)
Welding – Fusion-welded joints in steel, nickel, titanium
and their alloys (beam welding excluded) – Quality levels
for imperfections
26157-3 W7 2008-05 4.1.1 Fasteners; Surface discontinuities; Bolts, screws and studs 1991-12
subject to special requirements
50014 HP 801 2004-02 7.3.1 Electrical apparatus for potentially explosive atmospheres – 2000-02
No. 25 General requirements
SUPERSEDING DOCUMENT:
DIN EN 60079-0 (2014-06)
Explosive atmospheres – Part 0: Equipment –
General requirements
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
148-1 HP 2/1 2011-05 3.2.1.1, Metallic materials – Charpy pendulum impact test – 2011-01
3.2.2.1, Part 1: Test method
Table 1,
Table 2
HP 5/2 2011-05 Table 1,
Table 2,
Table 3
196 W 6/2 2009-03 4.3.2 Wrought copper and copper alloys – Detection of residual 1995-08
stress – Mercury(I)nitrate test
898-1 HP 100 R 2007-11 5.4.1.1 Mechanical properties of fasteners made of carbon steel 1999-11
W7 2008-05 2.1, 3.1, and alloy steel – Part 1: Bolts, screws and studs
4.1.1, 7.1,
Table 2 SUPERSEDING DOCUMENT:
DIN EN ISO 898-1 (2013-05)
Mechanical properties of fasteners made of carbon steel
and alloy steel – Part 1: Bolts, screws and studs with
AD 2000-Merkblatt
specified property classes – Coarse thread and fine pitch
thread
898-2 W7 2014-11 2.1, 3.1, Mechanical properties of fasteners made of carbon steel 2012-08
4.1.2, and alloy steel – Part 2: Nuts with specified property
Table 2 classes – Coarse thread and fine pitch thread
1127 B6 2006-10 Annex 1 Stainless steel tubes – Dimensions, tolerances and 1997-03
HP 100 R 2007-11 7.4.1 conventional masses per unit length
2624 W 6/2 2009-03 4.3.2 Copper and copper alloys – Estimation of average 1995-08
grain size
3506-1 HP 100 R 2007-11 5.4.1.1 Mechanical properties of corrosion-resistant stainless steel 1998-03
W2 2008-02 2.3, 3.1, fasteners – Part 1: Bolts, screws and studs
4.4.1, 5.2,
6.4.2, 7.2, SUPERSEDING DOCUMENT:
1) 2) to
DIN EN ISO 3506-1 (2010-04)
Table 5,
1) to Table 6
Mechanical properties of corrosion-resistant stainless steel
fasteners – Part 1: Bolts, screws and studs
3506-2 HP 100 R 2007-11 5.4.1.1 Mechanical properties of corrosion-resistant stainless steel 1998-03
W2 2008-02 2.3, 3.1, fasteners – Part 2: Nuts
4.4.1, 5.2
SUPERSEDING DOCUMENT:
DIN EN ISO 3506-2 (2010-04)
Mechanical properties of corrosion-resistant stainless steel
fasteners – Part 2: Nuts
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
3834-3 HP 0 2011-05 3.1 Quality requirements for fusion welding for metallic 2006-03
HP 100 R 2007-11 4.2 materials – Part 3: Standard quality requirements
4126-1 A2 2010-09 2) Safety devices for protection against excessive pressure – 2004-05
Part 1: Safety valves
SUPERSEDING DOCUMENT:
DIN EN ISO 4126-1 (2013-12)
Safety devices for protection against excessive pressure –
Part 1: Safety valves
4136 HP 2/1 2011-05 Table 1, Destructive tests on welds in metallic materials – 2011-05
Table 2 Transverse tensile test
HP 5/2 2011-05 9.2, Table 1,
Table 2 SUPERSEDING DOCUMENT:
DIN EN ISO 4136 (2013-02)
Destructive tests on welds in metallic materials –
AD 2000-Merkblatt
4759-1 B7 2015-04 2.2.2 Tolerances for fasteners – Part 1: Bolts, screws, studs 2001-04
and nuts; Product grades A, B and C
26)
5173 HP 0 2011-05 to Table 2b Destructive tests on welds in metallic materials – 2010-08
HP 2/1 2011-05 3.2.5, 3.2.7.1, Bend tests
Table 1,
Table 2 SUPERSEDING DOCUMENT:
HP 5/2 2011-05 Table 1, DIN EN ISO 5173 (2012-02)
Table 2, Destructive tests on welds in metallic materials –
Table 3 Bend tests
5178 HP 2/1 2011-05 3.2.1.1, Destructive tests on welds in metallic materials – 2011-05
3.2.3.1, Longitudinal tensile test on weld metal in fusion welded
Table 1, joints
Table 2
HP 5/2 2011-05 Table 1,
Table 2
5817 HP 5/1 2008-02 2.2, 2.3, 2.4 Welding – Fusion-welded joints in steel, nickel, titanium 2006-10
S2 2010-11 11.2, 8), and their alloys (beam welding excluded) – Quality levels
Table 5 for imperfections
SUPERSEDING DOCUMENT:
DIN EN ISO 5817 (2014-06)
Welding – Fusion-welded joints in steel, nickel, titanium
and their alloys (beam welding excluded) – Quality levels
for imperfections
6892-1 W 3/3 2013-08 3.1.3 Metallic materials – Tensile testing – Part 1: Method of test 2009-12
at room temperature
6892-2 W 3/3 2013-08 3.1.3 Metallic materials – Tensile testing – Part 2: Method of test 2011-05
at elevated temperature
6947 HP 2/1 2011-05 3.2.1.1 Welds – Working positions – Definitions of angles of slope 1997-05
and rotation
SUPERSEDING DOCUMENT:
DIN EN ISO 6947 (2011-08)
Welding and allied processes – Welding positions
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
7539-1 HP 1 2009-10 Annex 1 Corrosion of metals and alloys – Stress corrosion testing – 1995-08
Part 1: General guidance on testing procedures
SUPERSEDING DOCUMENT:
DIN EN ISO 7539-1 (2013-04)
Corrosion of metals and alloys – Stress corrosion testing –
Part 1: General guidance on testing procedures
8434-1 HP 100 R 2007-11 5.6.1 Metallic tube connections for fluid power and general use – 1997-11
Part 1: 24° compression fittings
SUPERSEDING DOCUMENT:
DIN EN ISO 8434-1 (2008-02)
Metallic tube connections for fluid power and general use –
Part 1: 24 degree cone connectors
8493 HP 8/3 2010-02 5.2.5.2 Metallic materials – Tube – Drift-expanding test 2004-10
W 6/2 2009-03 4.3.2
9015-1 HP 2/1 2011-05 Table 1 Destructive tests on welds in metallic materials – 2011-05
HP 5/2 2011-05 Table 1, Hardness testing – Part 1: Hardness test on arc welded
Table 3 joints
AD 2000-Merkblatt
9016 HP 2/1 2011-05 3.2.3.1, Destructive tests on welds in metallic materials – 2011-05
3.2.7.1, Impact tests – Test specimen location, notch orientation
Table 1, and examination
Table 2
HP 5/2 2011-05 Table 1, SUPERSEDING DOCUMENT:
Table 2,
DIN EN ISO 9016 (2013-02)
Table 3
Destructive tests on welds in metallic materials –
Impact tests – Test specimen location, notch orientation
and examination
9606-1 HP 3 2014-11 3.1, 3.4 Qualification testing of welders – Fusion welding – 2013-12
Part 1: Steels
9692-1 HP 1 2012-07 2 Welding and allied processes – Recommendations for joint 2004-05
preparation – Part 1: Manual metal-arc welding, gas-shielded
metal-arc welding, gas welding, TIG welding and beam
welding of steels
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
9692-3 HP 1 2012-07 2 Welding and allied processes – Recommendations for joint 2001-07
preparation – Part 3: Metal inert gas welding and tungsten
inert gas welding of aluminium and its alloys
9692-4 HP 1 2012-07 2 Welding and allied processes – Recommendations for joint 2003-10
preparation – Part 4: Clad steels
10042 HP 5/1 2008-02 2.2, 2.4 Welding – Arc-welded joints in aluminium and its alloys – 2006-02
S2 2010-11 Annex 6 Quality levels for imperfections
AD 2000-Merkblatt
Subclause 7.3
10628 HP 512 R 2003-01 4.1 Flow diagrams for process plants – General rules 2001-03
10893-10 W 12 2014-06 4.8 Non-destructive testing of steel tubes – Part 10: Automated 2011-07
full peripheral ultrasonic testing of seamless and welded
(except submerged arc-welded) steel tubes for the detection
of longitudinal and/or transverse imperfections
12944-1 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 1: General
introduction
12944-2 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 2: Classification
of environments
12944-3 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 3: Design
considerations
12944-4 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 4: Types
of surface and surface preparation
12944-5 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 5: Protective
paint systems
SUPERSEDING DOCUMENT:
DIN EN ISO 12944-5 (2008-01)
Paints and varnishes – Corrosion protection of steel
structures by protective paint systems – Part 5: Protective
paint systems
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
12944-6 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 6: Laboratory
performance test
12944-7 HP 801 2004-02 3.3 Paints and varnishes – Corrosion protection of steel 1998-07
No. 14 structures by protective paint systems – Part 7: Execution
and supervision of paint work
13919-1 HP 2/1 2011-05 3.2.7.1 Welding – Electrons and laser beam welded joints; Guidance 1996-09
on quality levels for imperfections – Part 1: Steel
13919-2 HP 2/1 2011-05 3.2.7.1 Welding – Electron and laser beam welded joints; Guidance 2001-12
on quality levels for imperfections – Part 2: Aluminium and its
weldable alloys
14731 HP 3 2007-02 2.1.3, 2.2.1, Welding coordination – Tasks and responsibilities 2006-12
2.2.2, 2.2.3
HP 100 R 2007-11 7.2.3
14732 HP 3 2014-11 3.1, 3.4 Welding personnel – Qualification testing of welding 2013-12
AD 2000-Merkblatt
operators and weld setters for mechanized and automatic
welding of metallic materials
15607 HP 2/1 2011-05 3.1 Specification and qualification of welding procedures 2004-03
for metallic materials – General rules
15614-1 HP 2/1 2011-05 3.1, 3.2.1.1, Specification and qualification of welding procedures 2008-09
3.2.1.2, for metallic materials – Welding procedure test –
3.2.1.3.1, Part 1: Arc and gas welding of steels and arc welding
3.2.7.2, of nickel and nickel alloys
Table 1
HP 5/2 2011-05 Table 1 SUPERSEDING DOCUMENT:
W5 2009-03 4.2
DIN EN ISO 15614-1 (2012-06)
Specification and qualification of welding procedures
for metallic materials – Welding procedure test –
Part 1: Arc and gas welding of steels and arc welding
of nickel and nickel alloys
15614-2 HP 2/1 2011-05 3.1, 3.2.2.1, Specification and qualification of welding procedures 2005-07
3.2.2.2, for metallic materials – Welding procedure test –
3.2.2.3.1, Part 2: Arc welding of aluminium and its alloys
3.2.2.3.2,
3.2.7.2
15614-5 HP 2/1 2011-05 3.1, 3.2.3.1, Specification and qualification of welding procedures 2004-07
3.2.3.2, for metallic materials – Welding procedure test –
3.2.3.3.1, Part 5: Arc welding of titanium, zirconium and their alloys
3.2.7.2
HP 5/2 2011-05 Table 3
15614-6 HP 2/1 2011-05 3.1, 3.2.4.1.1, Specification and qualification of welding procedures 2007-01
3.2.4.1.2 for metallic materials – Welding procedure test –
Part 6: Arc and gas welding of copper and its alloys
15614-7 HP 2/1 2011-05 3.1, 3.2.5 Specification and qualification of welding procedures 2007-09
for metallic materials – Welding procedure test –
Part 7: Overlay welding
AD-Mbl. DIN
DIN EN ISO AD-Mbl. Clause Title
edition edition
15614-8 HP 2/1 2011-05 3.1 Specification and qualification of welding procedures 2002-06
for metallic materials – Welding procedure test –
Part 8: Welding of tubes to tube-plate joints
15614-11 HP 2/1 2011-05 3.1 Specification and qualification of welding procedures 2002-10
for metallic materials – Welding procedure test –
Part 11: Electron and laser beam welding
15614-12 HP 2/1 2011-05 3.1, Specification and qualification of welding procedures 2004-10
3.2.8.1 for metallic materials – Welding procedure test –
Part 12: Spot, seam and projection welding
SUPERSEDING DOCUMENT:
DIN EN ISO 15614-12 (2014-10)
Specification and qualification of welding procedures
for metallic materials – Welding procedure test –
Part 12: Spot, seam and projection welding
1)
17659 HP 1 2014-06 to 2.4 Welding – Multilingual terms for welded joints with 2005-09
illustrations
17638 HP 5/3 2015-04 4 Non-destructive testing of welds – Magnetic particle testing 2010-03
App. 1
17663 HP 7/1 2014-11 2.2, 2.4 Welding – Quality requirements for heat treatment in 2009-10
connection with welding and allied processes
719 N4 2003-07 Table 1 Glass; Hydrolytic resistance of glass grains at 98 °C; 1989-12
Method of test and classification
965-2 B7 2015-04 2.2.2 ISO general purpose metric screw threads – Tolerances – 1999-11
Part 2: Limits of sizes for general purpose external and
internal screw threads; Medium quality
2768-1 N2 2000-10 9.2 General tolerances; Tolerances for linear and angular 1991-06
dimensions without individual tolerance indications
2768-2 N2 2000-10 9.2 General tolerances; Geometrical tolerances for features 1991-04
without individual tolerances indications
4759-1 W7 2008-05 3.5 Tolerances for fasteners – Part 1, bolts, screws and nuts 1980-05
with thread diameters 1,6 150 mm and product grades A,
B and C
AD-Mbl. DIN
DIN ISO AD-Mbl. Clause Title
edition edition
4759-1 SUPERSEDING DOCUMENT:
(continued)
DIN EN ISO 4759-1 (2001-04)
Tolerances for fasteners – Part 1: Bolts, screws, studs
and nuts; Product grades A, B and C
5 CR ISO Standards
AD-Mbl. CR ISO
CR ISO AD-Mbl. Clause Titel
edition edition
15608 HP 0 2011-05 2) to Table 1a, Welding – Guidelines for a metallic material grouping 2000-04
1) to Table 2a, system
1) to Table 3a,
3.1 SUPERSEDING DOCUMENT:
HP 2/1 2011-05 3.2.8.1
CEN ISO/TR 15608 (2013-04)
Welding – Guidelines for a metallic materials grouping
system
6 EN Standards
AD 2000-Merkblatt
AD-Mbl. EN
EN AD-Mbl. Clause Title
edition edition
SUPERSEDING DOCUMENT:
DIN EN ISO 3452-1 (2014-09)
Non-destructive testing – Penetrant testing –
Part 1: General principles
583-4 HP 100 R 2007-11 Table 2 Non-destructive testing – Ultrasonic examination – Part 4: 2002-09
Examination for discontinuities perpendicular to the surface
SUPERSEDING DOCUMENT:
DIN EN ISO 16826 (2014-06)
Non-destructive testing – Ultrasonic testing –
Examination for discontinuities perpendicular to the surface
SUPERSEDING DOCUMENT:
DIN EN ISO 17637 (2011-05)
Non-destructive testing of welds – Visual testing of fusion-
welded joints
1173 W 6/2 2009-03 1) to Table 1 Copper and copper alloys – Material condition designation 2008-04
1289 HP 100 R 2007-11 Table 2 Non-destructive examination of welds – Penetrant testing 1998-02
of welds – Acceptance levels
SUPERSEDING DOCUMENT:
DIN EN ISO 23277 (2015-06)
Non-destructive testing of welds – Penetrant testing –
Acceptance levels
AD-Mbl. EN
EN AD-Mbl. Clause Title
edition edition
SUPERSEDING DOCUMENT:
DIN EN ISO 11666 (2011-04)
Non-destructive testing of welds – Ultrasonic testing –
Acceptance levels
SUPERSEDING DOCUMENT:
AD 2000-Merkblatt
10246-9 HP 100 R 2007-11 Table 2 Non-destructive testing of steel tubes – Part 9: Automatic 2000-02
ultrasonic testing of the weld seam of submerged arc welded
steel tubes for the detection of longitudinal and/or transverse
imperfections
SUPERSEDING DOCUMENT:
DIN EN ISO 10893-11 (2011-07)
Non-destructive testing of steel tubes – Part 11: Automated
ultrasonic testing of the weld seam of welded steel tubes for
the detection of longitudinal and/or transverse imperfections
10246-16 HP 100 R 2007-11 Table 2 Non-destructive testing of steel tubes – Part 16: Automatic 2000-02
ultrasonic testing of the area adjacent to the weld seam of
welded steel tubes for the detection of laminar imperfections
SUPERSEDING DOCUMENT:
DIN EN ISO 10893-8 (2011-07)
Non-destructive testing of steel tubes – Part 8: Automated
ultrasonic testing of seamless and welded steel tubes for the
detection of laminar imperfections
13121-3 N1 2014-06 3.3.2 GRP tanks and vessels for use above ground – 2008-06
Part 3: Design and workmanship
SUPERSEDING DOCUMENT:
DIN EN 13121-3 (2010-06)
GRP tanks and vessels for use above ground –
Part 3: Design and workmanship
AD-Mbl. EN
EN AD-Mbl. Clause Title
edition edition
7 EN ISO Standards
AD-Mbl. EN ISO
EN ISO AD-Mbl. Clause Title
edition edition
10042 HP 100 R 2007-11 Table 2 Welding – Arc-welded joints in aluminium and its alloys – 2005-11
Quality levels for imperfections
8 ISO Standards
AD-Mbl. ISO
ISO AD-Mbl. Clause Title
edition edition
75 N1 2014-06 4.2, 4.4.5 Plastics and ebonite; Determination of temperature 1987-04
of deflection under load
AD 2000-Merkblatt
SUPERSEDING DOCUMENT:
ISO 75-1 (2013-04)
Plastics – Determination of temperature of deflection
under load – Part 1: General test method
ISO 75-2 (2013-04)
Plastics – Determination of temperature of deflection
under load – Part 2: Plastics and ebonite
ISO 75-3 (2013-04)
Plastics – Determination of temperature of deflection
under load – Part 3: High-strength thermosetting laminates
and long-fibre-reinforced plastics
4126-10 A2 2015-04 10.5.2 Safety devices for protection against excessive pressure – 2010-10
Part 10: Sizing of safety valves for gas/liquid two-phase flow
10931-2 HP 120 R 2001-06 5.2.7 Plastics piping systems for industrial applications – 1997-02
Poly(vinylidene fluoride) (PVDF) – Part 2: Pipes
SUPERSEDING DOCUMENT:
ISO 10931 (2005-12)
Plastics piping systems for industrial applications –
Poly(vinylidene fluoride) (PVDF) – Specifications for
components and the system
10931-3 HP 120 R 2001-06 5.3.6 Plastics piping systems for industrial applications – 1996-08
Poly(vinylidene fluoride) (PVDF) – Part 3: Fittings
SUPERSEDING DOCUMENT:
ISO 10931 (2005-12)
Plastics piping systems for industrial applications –
Poly(vinylidene fluoride) (PVDF) – Specifications for
components and the system
AD-Mbl. ISO
ISO AD-Mbl. Clause Title
edition edition
16528-1 G1 2014-06 1 Boilers and pressure vessels – Part 1: Performance 2007-08
requirements
0833-1 HP 801 2004-02 7.1.8 Alarm systems for fire, intrusion and hold-up – 2003-05
No. 25 Part 1: General requirements
SUPERSEDING DOCUMENT:
DIN VDE 0833-1 (2014-10)
Alarm systems for fire, intrusion and hold-up –
AD 2000-Merkblatt
0833-2 HP 801 2004-02 7.1.8 Alarm systems for fire, intrusion and hold up – 2004-02
No. 25 Part 2: Requirements for fire alarm systems
SUPERSEDING DOCUMENT:
DIN VDE 0833-2 (2009-06)
Alarm systems for fire, intrusion and hold up –
Part 2: Requirements for fire alarm systems
2040-4 A1 2006-10 4), 7.2.2 Calculation principles for the measurement for the fluid E 1990-01
flow using orifice plates, nozzles and venturi tubes –
Part 4: Fluid properties
10 VDMA Standards
AD-Mbl. VDMA
VDMA AD-Mbl. Clause Title
edition edition
3111 A 5 App. 1 2000-10 2.4.9 Compressed-air containers; Main dimensions and 1978-12
arrangement of the inspection opening