Professional Documents
Culture Documents
ResultadoDeAprendizaje Uni3 Candia
ResultadoDeAprendizaje Uni3 Candia
Process Industrials
1
Technological University of Ciudad Juarez
Student
20210163
Industrial Drawing
PIM51I
Teacher
Gonzalo Flores
Date
07-Agosto-2022
Mario Alberto Candia Meza 07/08/22
Process Industrials
3
Product Assembly
Board
3
Mario Alberto Candia Meza 07/08/22
Process Industrials
Material
Metal: Polished Steel Anthracite Gray paint finish
crossbar dimension
70cm x 160cm Height 106.80cm
board dimension
70cm x 160cm plus a 60 x 30 on the upper side of the board and two holes
with a diameter of 6cm are added at the customer's request.
Assembly Instructions
The assembly of this product is done as follows:
Join crossbars to legs by means of screws through holes that the crossbars
have in each corner
Step 2: Once the crossbars have been attached to the legs, we take the board
and place them on the crossbars following their measurements and,in the
same way as with the legs, join the board to the crossbars with screws through
integrated holes in each one. from the corners.
Mario Alberto Candia Meza 07/08/22
Process Industrials
Conclusions: 5
At the request of the client, we carried out this project following the
indications of each process that he required.
In order to cause customer satisfaction when seeing your product, doing a
good job is part of the daily life of each project designer, satisfying the
customer and meeting his needs.