Professional Documents
Culture Documents
Good Morning... S.R. Patel ! [ Project Implementation Unit ] Easy Links : Select Link
SubWorks
Search Items
S.No. Item No. Item Description Qty Unit Tender Rate(INR) Amount(INR)
SB-01
Demolition including stacking of serviceable materilas and disposal of
1. 1 1890 Cmt 0.00 0.0000
unserviceable materials with all lead and lift. (i) R.C.C. work
Clearing and grubbing road land includding uprooting rank vegetation,
grass, bushes, shrubs, saplings and trees girth upto 300mm removal of
2. 2 13111.48 Smt 0.00 0.0000
stumps of tress cut earlier and disposal of unserviceable materials. A)
By Mechanical means in area of light jungle.
Excavation for foundation including shoring & shruting upto 1.5
mt.depth All kind of Soil. including sorting out and stacking of unuseful
materials and disposing off the excavated stuff upto all lead and lift.
3. 3 (Excavated earth / Stuff to be stacked and surplus earth disposed at 15807 Cum 0.00 0.0000
non objectinable place to be found by the Contractor and necessary
permision to be obtained by contractor from local authority/
Government with royalty certification if applicable )
Excavation for foundation including shoring & shruting for 1.5 mt. to
3.0 mt. All kind of Soil. including sorting out and stacking of useful
materials and disposing off the excavated stuff upto all lead and lift
4. 4 (Excavated earth / Stuff to be stacked and surplus earth disposed at 12803 Cum 0.00 0.0000
non objectinable place to be found by the Contractor and necessary
permision to be obtained by contractor from local authority/
Government with royalty certification if applicable )
SB-04
Providing and Laying Brick work using common burnt clay building
bricks having crushing strength not less than 35kg/Sqcm. in foundation
148. 148 693 cum 0.00 0.0000
and plinth. In cement mortar 1:6 (1 cement : 6 fine sand) (B)
Conventional (For Hospital Building & Utility Building)
Providing and laying autoclave aerated concrete blocks as per drawing
in single or multiple layers with approved block laying polymer modified
adhesive mortar. Crushing strength of aerated concrete block shall not
be less than 40 KG/sqcm, minimum density in oven dry condition
between 651 to 750 KG/CUM, thermal conductivity shall not exceed
0.30 w/mk, fire resistant 4 hours, in true line level and plumb and
cleaning the surface with necessary tool tackles The drying shrinkage
149. 149 950 cum 0.00 0.0000
shall be not more than 0.05 percent for Grade 1 blocks and 0.10
percent for Grade 2 blocks when tested in accordance with IS : 6641
(Part-2)-1972 etc. including curing, scaffolding, racking / flush jointing
etc complete, as per drawing / specification etc, complete As per
drawings and design supplied by architect and instruction given by
authority and E.I.C. For all civil, plumbing, electrical & infrastructure
works. a) Ground floor (For Hospital Building & Utility Building)
Providing and laying autoclave aerated concrete blocks as per drawing
in single or multiple layers with approved block laying polymer modified
adhesive mortar. Crushing strength of aerated concrete block shall not
be less than 40 KG/sqcm, minimum density in oven dry condition
between 651 to 750 KG/CUM, thermal conductivity shall not exceed
0.30 w/mk, fire resistant 4 hours, in true line level and plumb and
cleaning the surface with necessary tool tackles The drying shrinkage
150. 150 834 cum 0.00 0.0000
shall be not more than 0.05 percent for Grade 1 blocks and 0.10
percent for Grade 2 blocks when tested in accordance with IS : 6641
(Part-2)-1972 etc. including curing, scaffolding, racking / flush jointing
etc complete, as per drawing / specification etc, complete As per
drawings and design supplied by architect and instruction given by
authority and E.I.C. For all civil, plumbing, electrical & infrastructure
works. b) First Floor (For Hospital Building & Utility Building)
Providing and laying autoclave aerated concrete blocks as per drawing
in single or multiple layers with approved block laying polymer modified
adhesive mortar. Crushing strength of aerated concrete block shall not
be less than 40 KG/sqcm, minimum density in oven dry condition
between 651 to 750 KG/CUM, thermal conductivity shall not exceed
0.30 w/mk, fire resistant 4 hours, in true line level and plumb and
151. 151 783 cum 0.00 0.0000
cleaning the surface with necessary tool tackles The drying shrinkage
shall be not more than 0.05 percent for Grade 1 blocks and 0.10
percent for Grade 2 blocks when tested in accordance with IS : 6641
(Part-2)-1972 etc. including curing, scaffolding, racking / flush jointing
etc complete, as per drawing / specification etc, complete As per
drawings and design supplied by architect and instruction given by
Providing & laying 12mm thick cement plaster in single coat on ceilings
Providing & laying 12mm thick cement plaster in single coat on ceilings
191. 191 and sofits of stairs for interior plastering upto floor two level finished 1098 Sqm 0.00 0.0000
even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including
Providing & laying 20 mm. thick sand face cement plaster Gutkha finish
211. 211 on walls up to 10mt. height and above ground level consisting of 12 1668 Sqmt. 0.00 0.0000
mm. thick backing coating of C.M. 1:3 (1 cement : 3 sand) and 8 mm.
thick finishing coat in C.M. 1:1 (1 cement :1 sand) etc. complete.(For
Providing and Applying Primer over external side of Retaining Wall area
concrete surface and allow it to cure for 6-8 hours. Over primed
surface, place 1.5mm thick SBS membtrnr from the junction of HDPE
membrane at the bottom and upto level of unit/building area. Lapping
of minimum of 150 mm shall be between HDPE Sunprufe and 1.5mm
215. 215 thick SBS membrane and a single side HDPE tap sunprufe seal tap shall 3218 Sqmt. 0.00 0.0000
be provided over lapping. begin laying of membrane from bottom to
top level of area. Overlap joint shall be provided of 80 mm between 2
sheets. 1.5mm thick SBS membrane shall be fixed by aluminum
flashing with the concrete structure and fill the top gap with
polysulphide sealant. After the installation of 1.5mm thick SBS protect
Providing and applying Wall painting (three coats) with plastic emulsion
paint of approved brand and manufacture on under coated wall surface
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Ceosetory windows & other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60
(Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum
oxicity index of 12 for 100 gms) fabricated with miter joints after star
headed SS screws having minimum frame density of 750 kg/ cum,
screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum
226. 226 compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 5653 Rmt 0.00 0.0000
and resistance to spread of flame of Class A category with property of
being termite/borer proof, water/moisture proof and fire retardant and
fixed in position with M.S hold fast/lugs/SS dash fasteners of required
dia and length complete as per direction of Engineer-In- Charge. (M.S
hold fast/lugs or SS dash fasteners shall be including). Note: For WPC
solid door/window frames, minus 5mm tolerance in dimensions i.e
depth and width of profile shall be acceptable. Variation in profile
dimensions on plus side shall be acceptable but no extra payment on
this account shall be made. applying PVC solvent cement and screwed
Providing & fixing SS 304 grade Baby latch" Door Bolt" size of 3.5"with
Providing & laying china mosaic flooring of approvd make for plain and
curved surfaces at floor, dado, otta etc. comprising of 20 to 25 mm size
broken pieces of ceramic/ glazed tiles (only white colour) laid over 1:6
cement mortar bedding including applying cement slurry at the rate of
2.75 kg per Sq.m. on plain or sloped surfaces and filling joints with
white cement. The flooring/ dado shall be tampered with wooden
rammer not exceeding 2 Kg in weight to bring the mortar up to the
260. 260 surface including rounding of the junctions and extending them upto 15 5437 Smt 0.00 0.0000
cm along the parapet wall. The rate shall include any type of bands,
vata, any colour, any pattern or design as per drawing, curing, cleaning
with water and oxalic acid etc. complete as sample approved by
Architect/ EIC. (Only plan area shall be measured including vata upto
150mm height). Rates should be inclusive of acid washing and vata. All
the waterproofing activities shall be carried out by in-house application
company of the principal material manufacturer and provide a written
corporate Supply Apply Corporate Warranty from the principal
264. 264 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 4846 Rmt. 0.00 0.0000
Providing and laying C.C. pavement of mix M-25 with ready mixed
concrete from batching plant. The ready mixed concrete shall be laid
and finished with screed board vibrator , vacuum dewatering process
265. 265 1838 Cmt 0.00 0.0000
and finally finished by floating, brooming with wire brush including The
panel shuttering work etc. complete As per drawings and design
supplied by architect and instruction given by authority and E.I.C.
Providing plinth protection to building including excavation in oridnary
soil and laying cement concrete (0.10 mt thk)1 : 5: 10 using Stone
aggregates of 20 mm nominal size in foundation Layer and above on
brick masonry 1:6 and above on PCC providing Cement Cocrete 1:2:4
(0.10 mt thk)(1 Cement : 2 Coarse Sand : 4 Stone Aggregrate 20 mm
266. 266 448 Sqm 0.00 0.0000
nominal size) coping on top including Broom finishing (plaster 10 mm )
wiht Square line(0.20 X 0.20) marking on Top and Side )and curing etc
complete only top area should be measured.etc., complete all As per
drawings and design supplied by architect and instruction given by
authority and E.I.C.
Providing and fixing 250 mm expansion joint system of Horizontal
Internal : Floor to Floor FF , Floor to wall, Roof to wall: The work shall
consist supply and installation of joints and seals -expansion/seismic
joint system 3R/Kantaflex model MSDSZJ/ MSD -QSZJ / MSDGCP/
MSWG/ MSW-QG/ MSDGCP/ MSD-QGCP in accordance with the
drawings and requireements of the specifications below. The joints are
proprietary design utilizing extruded aluminum base members ,self
aligning / centering arrangement and support plates.The material shall
be such that it provides wateright flat joint cover expansion control
sysytem that is capable of accommodating multidirectional seismic
movement without stress to its components.System shall consisit of
metal profile that incorporates a universal aluminum base member
267. 267 861 Rmt 0.00 0.0000
designed to accommodate various project conditions and floor/roof
treatments. including cover plate, The cover plate shall be designed of
width and thickness requried to satisfy projects movement and loading
requirements and secured to base members by utilizing manufacturer''s
pre-engineered self-centering arrangement that freely rotates / moves
in all directions. The self - centering arrangement shall exhibit circular
sphere ends that lock and slide inside the corresponding aluminum
extrusion cavity to allow freedom of movement and flexure in all
directions including vertical displacement ,Including EPDM Profile
including cost of GP2 grouting. The joint sysytem shall resist damage or
deterioration from the impact of falling ice, exposure to UV,airborne
contaminants as per manufacturer speciation and the joint design and
Supply and fixing Wooden lead lined door frame for Single /Double leaf
to required sizes of The frame should be Single rebate profile of size
120 x 70 mm made out of Hardwood Mirandi. Frames shall be Butt
jointed and field assembled with self tabs. The Shutter & Frame Shall
be fully lead lined of min of 2 MM lead Sheet with 99% purity and as
defined by AERB. All provision should be mortised, drilled and tapped
for receiving appropriate hardware. Rubber door silencers should be
provided on the striking jamb. Frames should be fixed by anchor
fasteners for installation on a finished plastered masonry wall opening
fixed in existing opening with the help of anchor fastener of appropriate
size as per direction of Engineer in Charge. The manufacturer should be
Constructing RCC Under Ground water tank with Providing and laying
controlled cement concrete M250 mix for R.C.C. work including
reinforcement, boxing, centering, vibrating, , PVC water stopper, curing
and mixed with approved water proofing cement compound or
"CEMWET" or "PIDICRETE LW" integral water proofing admixture as
water proofing agent to be mixed with 50 kgs. bags shall be as
recommended by the manufacture of the water proofing material,
concrete work for top, bottom slab & side pardi for underground water
tank item incl. Necessary excavation & refilling the available earth, 15
327. 327 700000 Liter 0.00 0.0000
cm thk 1:2:4 for bedding of concrete, 20 mm thk. water proofing
cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo,
vata, watering etc. Comp. to all face of tank . including locking
arrangement outlet, inlet, overflow and washout outlet pipe
arrangement as necessary & C.I. Cover 0.60 x 0.45 weight not less
then 35 kg with locking arrangement. etc. comp as per structural
drawing Including Reinforcement TMT-FE500D As per drawings and
design supplied by architect and instruction given by authority and
E.I.C.
Constructing RCC Overhead water tank with Providing and laying
controlled cement concrete M250 mix for R.C.C. work including
reinforcement, boxing, centering, vibrating, , PVC water stopper, curing
and mixed with approved water proofing cement compound or
"CEMWET" or "PIDICRETE LW" integral water proofing admixture as
water proofing agent to be mixed with 50 kgs. bags shall be as
recommended by the manufacture of the water proofing material,
concrete work for top, bottom slab & side pardi for Overhead water
328. 328 150000 Liter 0.00 0.0000
tank item incl. 20 mm thk. water proofing cement plaster in C.M. 1:3
with smooth finishing & Glazes tile Dedo, vata, watering etc. Comp. to
all face of tank . including locking arrangement outlet, inlet, overflow
and washout outlet pipe arrangement as necessary & C.I. Cover 0.60 x
0.45 weight not less then 35 kg with locking arrangement. etc. comp
as per structural drawing Including Reinforcement TMT-FE500D As per
drawings and design supplied by architect and instruction given by
authority and E.I.C.
Providing and fixing tiled false ceiling of approved materials of size
595x595 mm in true horizontal level suspended on inter locking metal
grid of hot dipped galvanized steel sections (galvanized @ 120
gsm/sqm, both side inclusive) consisting of main "T" runner with
suitably spaced joints to get required length and of size 24x38mm
made from 0.30mm thick (minimum) sheet, spaced at 1200mm center
to center and cross "T" of size 24x25mm made of 0.30mm thick
(minimum) sheet, 1200mm long spaced between main "T" at 600mm
center to center to form a grid of 1200x600 mm and secondary cross
"T" of length 600mm and size 24x25mm made of 0.30 mm thick
329. 329 245 Smt 0.00 0.0000
(minimum) sheet to be interlocked at middle of the 1200x600mm panel
to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and
laying false ceiling tiles of approved texture in the grid including,
wherever, required, cutting/making, opening for services like diffusers,
grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to
be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25
x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4mm GI adjustable rods with galvanised butterfly level clips
of size 85 x 30 x 0.8 mm paced at 1200mm center to center along
main T, bottom exposed width of 24 mm of all Tsections shall be pre-
Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet
(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed
with M4 x 38 mm SS screws at distance 75 mm from the edges and
150 mm c/c , including applying a coat of approved fire resistant
primer/powder coating of not less than 30 micron on G.I. beading, &
special ceramic tape of 5 x 20 mm size etc complete in all respect as
per direction of Engineer-in-charge. The glass shall be clear,
SOIL, WASTE, VENT PIPES & FITTINGS Supply, installation, testing and
commissioning of all Pipes and pipe accessories, traps, supply of
supports and support fixing, chase cutting and making good the
surfaces, coving, core cutting, etc. required shall be in the Scope of the
Contractor. All consumables other than materials supplied by
Receiving, checking, storing & fixing CP brass / S.S. towel rod, 500 /
409. 409 B-type depth 1.50 meter for 150 mm diameter sewer 14 Each 0.00 0.0000
425. 425 (4)D-type depth 3.15 meter for 150mm diameter sewer. 11 Each 0.00 0.0000
Extra rate for constructing B.B masonry for every additional depth 0.10
426. 426 meter or part there of over item 24.27 (I) for depth from 0.90 meter to 15 Each 0.00 0.0000
1.50 meter.
Supply and fixing framed FRP/GRP grating and mounting frame same
as above complete with painting & designation & as per technical
427. 427 21 Each 0.00 0.0000
specifications, provided drawings by architect,techincal specification
and as directed by the authority EIC. 600 x 600 size
434. 434 OPERATION AND MAINTAINENCE Second year with all consumables 1 JOB 0.00 0.0000
435. 435 Third year with all consumables 1 JOB 0.00 0.0000
436. 436 Fourth year with all consumables 1 JOB 0.00 0.0000
437. 437 Fifth year with all consumables 1 JOB 0.00 0.0000
Operation & Maintenance Contract for first year WTP To operate the
entire WTP under available load conditions for further period of 30 days
on round the clock basis. To provide services of contractors expert
operating personal comprising of : One Supervisor Monthly Visit & As &
When required for Trouble Shooting One Plant operator one per shift in
438. 438 three shifts. Company’s back up services of senior engineers and 1 JOB 0.00 0.0000
experts for any major problems, general check up and maintenance
and advise. (As & When Required Technician Shall be available )All
tools, equipment and testing devices to be provided by the contractor.
Consumable including lubricants and chemicals will be provided by
Owners.
439. 439 OPERATION AND MAINTAINENCE Second year with all consumables 1 JOB 0.00 0.0000
440. 440 Third year with all consumables 1 JOB 0.00 0.0000
441. 441 Fourth year with all consumables 1 JOB 0.00 0.0000
SB-10
442. 442 Fifth year with all consumables 1 JOB 0.00 0.0000
Providing and fixing, testing and commissioning of below Cables for Fire
466. 466 Pump Room Cabling from Panel to Fire Pumps. complete as required, 40 Meter 0.00 0.0000
as per drawings and design supplied by architect and instruction given
providing and fixing fire rated steel doors with steel frames as per
BS:476 (20&22), IS 3614 (Part-2) for stability and integrity. pressed
Galvanized steel conforming to IS 277 with the following specification.
recommended fire door shell have doors tested at CBRI for maximum
rating of 120 Minutes. Door frame shall be Single rebate profile of size
105 x 57 mm made out of 1.60mm (16gauge) minimum thick
galvanized steel sheet. Frames shall be mitered and field assembled
with self-tabs. All provision should be mortised, drilled and tapped for
receiving appropriate hardware. Rubber door silencers should be
provided on the striking jamb. Frames should be provided with back
plate bracket and anchor fasteners for installation on a finished
plastered masonry wall opening. Once frame installed should be
grouted with cement & sand slurry necessary for fire doors on the clear
masonry opening. Door leaf shall be 46mm thick fully flush double skin
516. 516 15 Nos. 0.00 0.0000
door. Door leaf shall be manufactured from 1.2mm (18guage)
minimum thick galvanized steel sheet. The internal construction of the
door should be rigid reinforcement pads for receiving appropriate
hardware. The infill material shall be resin bonded honeycomb core. All
doors shall be factory prepped for receiving appropriate hardware and
provided with necessary reinforcement for hinges, locks, and door
closers. The edges should be interlocked with a bending radius of
1.4mm. For pair of doors astragals has to be provided on the meeting
stile for both active and inactive leaf. Vision lite wherever applicable
should be provided as per manufacturer''s recommendation with a
beading and screws from inside. The glass should be 6mm clear
borosilicate fire rated glass of relevant rating of the door. All doors and
frames shall be finished with polyurethane aliphatic grade paint of
approved color. The door leaf and frame shall have passed minimum
250 hours of salt spray test. Rate should include supply and installation
MID BACK Chair seat/back assembly: the seat and back should be
made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered
with .fabric upholstery covers and moulded polyurethane foam. the
back foam should be designed with contoured lumbar support for extra
comfort. the seat has extra thick foam on front edge to give comfort to
popliteal area back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm.
(w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr
polyurethane foam should be moulded with density = 45±2 kg/m3 and
hardness load 16 ± 2 kgf for 25% compression. armrests :the one-
piece armrests should be injection moulded from black co-polymer
polypropylene. center tilt synchro mechanism: the mechanism should
SOFA 3 SEATER seat foam: the seat should be made of pu foam with
density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam
with density 28 ± 2 kg/cu. seat should be upholstered with fabric or
leatherette. 2) back foam: the back should be made of pu foam with
524. 524 density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft 45 Each 0.00 0.0000
foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette
understructre : understructure should be made up of 1.2±0.1 cm. thick
hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring
assembly should be mounted in understructure for support and
additional cushioning purpose leg assembly: it should be a welded
SIDE TABLE Finesse ERU -5216 RHS size shall be 1550 Width x 450
Depth x 705 Height.The top of Finesse ERU -5216 LHS shall be 25 mm
thick plain particle board (PPB) Clad with 0.6 mm thick post formed
laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly
536. 536 sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm 42 Each 0.00 0.0000
thick plain particle board (PPB) Clad with 1.0 mm thick Decorative
Laminate (DL) on both sides. etc.complete as per drawings and design
supplied by architect and instruction given by authority and E.I.C. Edge
sealed with 2 mm thick PVC Beading. APPROVED MAKE : GODREJ /
Supplying and Placing of Pediatric bed with overall size – 1570L x 839W
x 75H. Description – Pediatric Sheet bed is a plain bed used in recovery
Supplying and Placing Folding Wheel Chair with Overall dimension: (L)
790 x (W) 600 x (H) 870mm Frame structure Foldable frame structure
is made of section 22x1.2mm A3 carbon steel with chrome finish. Cross
bar are made of A3 carbon steel with section 25.4 x 1.2mm. Rear
572. 572 wheel 24 inch Solid mag wheels with alloy in the rim Hand rim 20 Each 0.00 0.0000
Integrated hand rim provide to drive the wheel chair of section
16x1.2mm A3 carbon steel with chrome finish Front wheel 8 inch HUB
made of PA polymer and outer with solid rubber Arm rest PU molded
arm rest & base is made of ABS for better arm support Calf rest & seat
Leatherette strap for calf rest & leatherette cushion for seat Footrest
Supplying and placing of Vertical Filing Cabinets whcih use less floor
space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X
620mm(D). All the components shall be made of CRCA . It should have
1 Point Locking Mechanism and a Rigid Knock Down Construction. The
Top, Side & Drawer Front thickness should be 0.7mm. The Frames,
Drawer-inside cover and Side Back Side thickness should be 0.6mm.
The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip
Full length Recess Handle shall be integrated into Metal Drawer for easy
pull out convenience. There shall be a Snap on type plastic label holder
582. 582 36 Each 0.00 0.0000
on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from
front to back of thickness 20mm per drawer can be hanged in VFC. The
Centralized locking System shall be provided along with Shooting Bolt
Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping
arrangement which ensures that when one drawer is opened for use, it
does not allow other drawers to be opened. The High Quality Precision
Ball Slide shall be provided with Drawer Load capacity of max 40 kg
and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be
riveted at the bottom corners for rigidity. Optional Accessories like
Drawer Partition and Cradle for hanging A4 file folders front to back
706. 706 Supply Installation Testing and Commissioning of Dirty/Sterile 6 Nos. 0.00 0.0000
Reception Trolley for Loading/Unloading from Steriliser L 200 x W 60
Electric Work SECTION 1.00 POINT WIRING Point wiring for secondary
light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper
wires, in below type of pipe to be erected complete with earth
773. 773 continuity and necessary connection with primary light with accessories 5530 Pt. 0.00 0.0000
erected on Metal / PVC / wooden box covered with 3 mm thick PC
(Polycarbonate) / Acrylic sheet for open / concealed wiring. with
necessary Lamp holder / ceiling rose / H.D.Connector as directed.
Note:- Maximum up to 6 mtrs length, excess will be considered as
Point wiring for on board Looped Plug with 6A Modular type switch & 5
pin socket erected on PVC / Metallic/Wooden box, single mounting base
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
822. 822 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 100 Mtr. 0.00 0.0000
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
Providing and, fixing heavy duty flange type brass cable gland with
providing and erecting Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 35 KA. at 415 V. having
providing and erecting Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 50 K.A. and above at 415 V
having normal current rating 800A.with variable thermal & magnetic
release suitable to work on A.C.supply 50 c/s. with all internal
Approved make standard Draw out type 4 Pole Air circuit breaker.
Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v,
Ui=1kv ,impulse voltage=12 kv with following typ (B) with
934. 934 microprocessor Release with over load, short circuit, earth fault 3 Ea. 0.00 0.0000
protection and metering display in modular design with LED display and
Test Trip button facility, CTs and auxiliary contacts, of following current
ratings. Operational Handle Assembly Complete for (ii) 200 / 250 /
320 / 400 / 630 / 800 Amps The cost inclusive of spreader links and
Supplying and erecting triple pole & neutral 440V/ 500V panel
mounting Aluminium Busbars with four equal Nos. of bus having
946. 946 current density not more than 0.8 Amp. / sq.mm (Rated current / cross 40 Rn.Mtr 0.00 0.0000
section area) duly wrapped with colour insulating tape for phase
sequence of following current carrying capacity, erected with necessary
bus bar supports /insulators, main cable socket to each busbar,erected
Providing & erecting weather proof, dust & vermin proof, floor mounted
front operated indoor type cubical panel board necessary IP-42 and
above protection as per approval from engineer incharge made from 14
SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories , supporting
angles/ flats channel including cutting, bending, drilling, welding,
riveting with internal partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of supplied switch gears,
BUSBARS, suitable size of inter connecting PVC copper wire / copper-
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte
SECTION 5.00 LIGHT FIXTURE AND FAN ALL LIGHT FIXTURES SHALL
COMPLY TECHNICAL PARAMETERS AS MENTIONED BELOW: 1.The
Fixture and driver should be of same make only. 2.The manufacture
should provided Complete TTC and quality assurance Plan for Fixtures
during supply. 3.The Warranty letter for 5years should be provided by
the Manufacturer. 4.Fixture should be warrantied for 5yrs for 50,000
hrs @ L70 ( LM79 from NABL accredited Lab to be submitted along with
Letter from Manufacturer for the Life class claim of L70 @ 50,000 hrs.)
5.The product should be Manufactured in India (all the Components
should be manufactured in India except the Led source which can be
imported . (Approved Led source Nichia , Cree, Lumileds , Osram,
Bridgelux Only the Invoice copy of the Purchase of Led modules from
these manufacturer''s need to be submitted).) 6. PF >=0.95 and THD
<=10 % ( Certificate need to be submitted from NABL Accredited lab)
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2
Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. &
992. 992 corrosion resistance with diffuser with company mark/name 120 to 300 2100 Nos. 0.00 0.0000
V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt
LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds /
NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting
Supplying and erecting LED street light / Flood light fittings with High
power White LEDs wattage of 1Watt and above assembled on single
1019. 1019 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1120 Kg. 0.00 0.0000
1020. 1020 For using salt and charcoal / coke as required for pipe type earthing. 60 Ea. 0.00 0.0000
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
1021. 1021 200 Mtr. 0.00 0.0000
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (j) One wire 50.00 sq. mm
SECTION 08.00 WATER COOLER & AC Providing & erecting water cooler
having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @
an ambient temp of 45° C. The outlet temp. of the water should drop
1068. 1068 Cost of DG of operations and maintainance (O & M) for 3rd year 1 job 0.00 0.0000
including all type of maintainance and in comprehesiv and taken care of
1094. 1094 SITC of Jack Cat 6 Keystone UTP FOR DATA - Grey 1200 NO 0.00 0.0000
1095. 1095 SITC of Jack Cat 6 Keystone UTP FOR Voice-Blue 800 NO 0.00 0.0000
1096. 1096 SITC of Face Plate - Dual (Keystone Jack,square) 800 NO 0.00 0.0000
1097. 1097 SITC of Face Plate - Single (Keystone Jack,square) 600 NO 0.00 0.0000
1098. 1098 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U'' Snag less 1200 NO 0.00 0.0000
1099. 1099 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U'' Snag less 1200 NO 0.00 0.0000
1100. 1100 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded 60 NO 0.00 0.0000
1113. 1113 SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM 60 NO 0.00 0.0000
1114. 1114 SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m 160 NO 0.00 0.0000
1144. 1144 SITC of Jack Cat 6 Keystone UTP FOR CAMERA 350 NO 0.00 0.0000
1145. 1145 SITC of Face Plate - Single (Keystone Jack,square) 350 NO 0.00 0.0000
1146. 1146 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded 45 NO 0.00 0.0000
1147. 1147 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U'' Snag less 700 NO 0.00 0.0000
Client PC with Intel i7 processor with 16GB RAM , 4GB NVDIA graphics
1148. 1148 card and 1TB minimum HDD.As per drawing and design supplied by 2 NO 0.00 0.0000
architect and instruction given by authority and E.I.C.
Supply, Installation, Testing & Commissioning Monitor Supply,
Installation, Testing & Commissioning of 55" LED monitor and as per
1149. 1149 final directions of Consultants and Owner make and model number.As 3 NO 0.00 0.0000
per drawing and design supplied by architect and instruction given by
authority and E.I.C.
1153. 1153 SITC of Ceiling loudspeaker 6W, ABS with clamps 520 NO 0.00 0.0000
1154. 1154 SITC of Horn loudspeaker 30W, circular, ABS 2 NO 0.00 0.0000
1211. 1211 Supply, Installation, Testing and Comissioning of 2 Core X 1.5 Sq.mm 46500 Mtrs. 0.00 0.0000
FRLS twisted pair shielded, PVC insulated armoured copper conductor
For OT ROOMS LED Based Annunciator display panel for Temp+Rh with
1252. 1252 sensor, lead cable of 15 Mtrs with power supply complete for concealed 25 Sets 0.00 0.0000
wall mount with Modbus RTU over RS 485 communication protocol.As
1267. 1267 Annual Maintenance Contract (CMC) for 2nd Year for lift work 1 Year 0.00 0.0000
1268. 1268 Annual Maintenance Contract (CMC) for 3rd Year for lift work 1 Year 0.00 0.0000
1269. 1269 Annual Maintenance Contract (CMC) for 4th Year for lift work 1 Year 0.00 0.0000
1270. 1270 Annual Maintenance Contract (CMC) for 5th Year for lift work 1 Year 0.00 0.0000
1295. 1295 3200 CFM 150 mm 8.0 TR 6.12 Kw (GROUND FLOOR , MINOR O.T). 1 Each. 0.00 0.0000
1297. 1297 10500 CFM 150 mm 26.0 TR 17.48 Kw (8TH FLOOR, ICU) 1 Each. 0.00 0.0000
1298. 1298 7000 CFM 150 mm 17.0 TR 17.17 Kw (8TH FLOOR, ICU CARDIOLOGY) 3 Each. 0.00 0.0000
1299. 1299 7500 CFM 150 mm 18.0 TR 18.82 Kw (8TH FLOOR, ICU CARDIOLOGY) 1 Each. 0.00 0.0000
1300. 1300 4000 CFM 150 mm 10 TR 11.18 Kw (9TH FLOOR, STERILE CORRIDOR) 1 Each. 0.00 0.0000
1301. 1301 8000 CFM 150 mm 20 TR 20.56 Kw (9TH FLOOR, STERILE CORRIDOR) 1 Each. 0.00 0.0000
1304. 1304 10000 CFM 80 mm 25.0 TR 26.43 Kw (9TH,10TH FLOOR, ICU) 2 Each. 0.00 0.0000
1305. 1305 10500 CFM 80 mm 26.0 TR 26.43 Kw (9TH, 10 FLOOR, ICU) 2 Each. 0.00 0.0000
1306. 1306 6000 CFM 50 mm 15.0 TR (MGP Room) 1 Each. 0.00 0.0000
1308. 1308 4500 CFM 150 mm 11.0 TR 4.9 Kw (9TH FLOOR, CATH LAB-01,02) 2 Each. 0.00 0.0000
1309. 1309 4800 CFM 150 mm 12.0 TR 4.77 Kw (9TH FLOOR, CARDIAC O.T. -01) 1 Each. 0.00 0.0000
1310. 1310 5500 CFM 150 mm 14.0 TR 4.77 Kw (9TH FLOOR, CARDIAC O.T. -02) 1 Each. 0.00 0.0000
1311. 1311 4800 CFM 150 mm 9.50 TR 4.77 Kw (10TH,OT-2) 1 Each. 0.00 0.0000
1312. 1312 5200 CFM 150 mm 13.0 TR 4.77 Kw (10TH,OT-4) 1 Each. 0.00 0.0000
Cross Flow Plate Type Heat Exchanger for Isolation Wards. Supply &
Installation of HEAT RECOVERY UNIT (HRU) Units Floor Standing
Double Skin Heat Recovery Units in Double Decker Construction...
Supplying, installing, testing and commissioning of HEAT RECOVERY
UNIT (HRU) double skin construction with 43mm thk. PUF insulated
Panels FOR FRESH AIR & EXHAUST AIR SYSTEM. The unit shall
comprise of filter section, cross flow heat exchanger type heat recovery
unit, inlets and outlets for fresh air / exhaust air , fan sections with
DIDW fan with motor and drive package. The exhaust section of the
unit shall be provided with motor actuated GSS damper duly
1313. 1313 interlocked with the fan. Minimum sensible heat transfer efficiency of 2 Each. 0.00 0.0000
heat recovery unit (Cross flow heat exchanger) shall be 55%. The
Noise level shall be < 60 dB at 1 meter distance. As per drawings and
design supplied by architect and instruction given by authority and
E.I.C. a) Fan section with DIDW fan type SA & RA fans. b) Coil sections
with 4/6-RD DX Type cooling coil (face velocity not over 500 FPM for
Dehumidified CFM). Cooling coil shall be selected to satisfy Air Volume
as well as Cooling Capacity capacity. Coil shall be intertwined type, i.e.
circuiting should be done to provide flow through the entire coil face.
c) 10µ + 5µ filtration from fresh air side. Pre–Filters should be
washable-type. d) Mixing Box with HRU-mounted opposed blade
SB-28
SB-29
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized
NBR seal flanged end & PN 16 pressure rating for chilled / hot water
1373. 1373 circulation including insulation as specified. As per drawings and design 8 Each. 0.00 0.0000
supplied by architect and instruction given by authority and E.I.C. 250
mm dia.
Y - STRAINER of Ductile CI Body flanged ends with stainless steel
strainer for chilled / hot water circulation including insulation as
1374. 1374 8 Each. 0.00 0.0000
specified. As per drawings and design supplied by architect and
instruction given by authority and E.I.C. 250mm dia. PN-16.
Providing and fixing in position the industrial type pressure gauges with
gun metal / brass valves complete as required. As per drawings and
1413. 1413 100 mm Dia. (75 mm thick insulation) 150 Per RMt 0.00 0.0000
1414. 1414 80 mm Dia. (75 mm thick insulation) 160 Per RMt 0.00 0.0000
1415. 1415 65 mm Dia. (75 mm thick insulation) 65 Per RMt 0.00 0.0000
1416. 1416 50 mm Dia. (75 mm thick insulation) 140 Per RMt 0.00 0.0000
1417. 1417 40 mm Dia. (75 mm thick insulation) 85 Per RMt 0.00 0.0000
1418. 1418 32 mm Dia. (75 mm thick insulation) 180 Per RMt 0.00 0.0000
1419. 1419 25 mm Dia. (75 mm thick insulation) 150 Per RMt 0.00 0.0000
SB-30
1423. 1423 Butterfly Valves (Lever Operated) 100 mm Dia. 8 Each. 0.00 0.0000
Providing and fixing in position the industrial type pressure gauges with
gun metal / brass valves complete as required. As per drawings and
1426. 1426 15 Each. 0.00 0.0000
design supplied by architect and instruction given by authority and
E.I.C.
Providing & fixing in position the mercury in glass industrial type
1427. 1427 thermometers. As per drawings and design supplied by architect and 15 Each. 0.00 0.0000
instruction given by authority and E.I.C.
Y'' type Strainer. The strainer shall be single or double type screwed
thread for bores of up to 50 mm and flanged for bores of 65 mm
1432. 1432 above. Strainers of up to 50 mm shall be gun metal or bronze. As per 2 Each. 0.00 0.0000
drawings and design supplied by architect and instruction given by
authority and E.I.C. 100 mm Dia.
Expansion Bellows. As per drawings and design supplied by architect
1433. 1433 4 Each. 0.00 0.0000
and instruction given by authority and E.I.C. 100 mm Dia.
Forged Brass Ball Valves. As per drawings and design supplied by
1434. 1434 10 Each. 0.00 0.0000
architect and instruction given by authority and E.I.C. Size - 50 NB
Auto Airvent with 15mm Ball Valve. As per drawings and design
1435. 1435 10 Each. 0.00 0.0000
supplied by architect and instruction given by authority and E.I.C.
Supply, installation, balancing and commissioning of factory fabricated
GSS sheet metal rectangular/round ducting complete with RTV sealant
& neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,
1436. 1436 supports etc. as per approved drawings and specifications of following 2500 Per SMt 0.00 0.0000
sheet thickness complete as required. As per drawings and design
supplied by architect and instruction given by authority and E.I.C.
Thickness 0.63 mm sheet 120 GSM
1437. 1437 Thickness 0.80 mm sheet 120 GSM 2000 Per SMt 0.00 0.0000
1438. 1438 Thickness 1.00 mm sheet 120 GSM 875 Per SMt 0.00 0.0000
1439. 1439 Thickness 1.25 mm sheet 120 GSM 190 Per SMt 0.00 0.0000
1441. 1441 Thickness 0.80 mm sheet 120 GSM 1000 Per SMt 0.00 0.0000
1442. 1442 Thickness 1.00 mm sheet 120 GSM 375 Per SMt 0.00 0.0000
1445. 1445 Thickness 0.80 mm sheet 120 GSM 180 Per SMt 0.00 0.0000
1446. 1446 Thickness 1.00 mm sheet 120 GSM 100 Per SMt 0.00 0.0000
Supplying & fixing of egg crate stainless steel perforated sheet for
Supply / Return Air as per specifications for clean room / OT areas. As
1453. 1453 40 Per SMt 0.00 0.0000
per drawings and design supplied by architect and instruction given by
authority and E.I.C.
Supplying & fixing of Fresh air intake louvers with bird screen dampers
1454. 1454 (Aluminium extruded only). As per drawings and design supplied by 50 Per SMt 0.00 0.0000
architect and instruction given by authority and E.I.C.
Powder Coated MS CRCA Body & Aluminium impeller high velocity air
1476. 1476 4C x 4 Sqmm Copper Cable ( For Fire Pressurization Fans) 650 Per RMt 0.00 0.0000
4C x 2.5 Sqmm Copper Cable ( For Jet Fans ) Mineral Insulated Copper
Conductor (MICC) Cable with seamless outer copper sheath Fire
Survival type, which can withstand 950 Deg C for 3 hours 500 V
gradeas per BS 6387 and shall also withstand CWZ test on one single
Cable as per BS 8434. The cable shall be approved by LPCB, and the
1477. 1477 performance requirement should as per IEC 60331, BS 5839-1, BS 1560 Per RMt 0.00 0.0000
6387, and BS 8434 standards. The cable should be supplied and
installed with all accessories / terminations / glands / saddles etc. as
per BS EN 60702 part 2 for Jet Impulse fans ( 2 runs considered for
dual speed) As per drawings and design supplied by architect and
instruction given by authority and E.I.C.
Supply & laying of XLPE armoured copper conductor twisted shielded
control cables 3C X 1.5 Sq.mm twisted shielded cables for CO sensors.
1478. 1478 1256 Per RMt 0.00 0.0000
As per drawings and design supplied by architect and instruction given
by authority and E.I.C.
1479. 1479 Earthing for all equipments. As per drawings and design supplied by 860 Per RMt 0.00 0.0000
architect and instruction given by authority and E.I.C. PVC insulated
1489. 1489 150 CFM ( 12 mm static pressure) 160 Each 0.00 0.0000
MCC FOR VFD DRIVEN AHU WITH TWIN MOTOR. Supply installation,
testing and commissioning of the following cubicle type, dead front,
sheet steel, wall mounted control panels including anchoring into the
wall, wiring, incoming, earthing & terminating into MCCB in each panel.
All internal wiring power cabling and copper earthing of air handling
unit motors from the panel shall be included. All outgoing shall be
provided with Stop / Manual /Auto selector switch to facilitate operation
through BAS. All starters shall be provided with potential free Contact
for Connections to Building Automation System. The panel shall include
the following components and accessories. Suitable rating Incoming
1500. 1500 1 Each. 0.00 0.0000
MCCB for 2 nos fan motors as per the ratings given below, MCCB shall
be suitable for motor duty and able to withstand fault level of 20 KA.
VFD starter as outgoing for each fan motor as per KW ratings Terminal
block for power distribution. Contactor, over load relay with built in
single phasing protection. Phase indicating lights and indicating light for
ON status. Digital voltmeter and digital ammeter with selector
switches. Time delay relay for delayed automatic restart of air handling
unit motor. Wiring for microswitch for stopping the fan when fire
damper closes. For on/off/remote and local operation, 3 pole single
throw switch shall be provided in each AHU panel to facilitate override
of the automatic operation. All starters shall be provided with suitable
1501. 1501 12000 CFM / 31.00 TR (4TH FLOOR, NEPHROLOGY) 1nos 11.30 kw 1 Each. 0.00 0.0000
1502. 1502 14500 CFM / 36.0 TR (GROUND FLOOR , CARDIC ICCU). 1nos 15.0 kw 1 Each. 0.00 0.0000
1503. 1503 3200 CFM / 8.0 TR (GROUND FLOOR , MINOR O.T). 1nos 3.70 kw 1 Each. 0.00 0.0000
1504. 1504 5000 CFM / 12.5 TR (GF, CASUALTY WARD) 1nos 5.50 kw 1 Each. 0.00 0.0000
1505. 1505 11500 CFM / 30.0 TR (4TH FLOOR, UROLOGY) 1nos 11.30 kw 1 Each. 0.00 0.0000
1506. 1506 17500 CFM / 43.0 TR (8TH FLOOR, LABORATORY) 1nos 18.30 kw 1 Each. 0.00 0.0000
1507. 1507 10500 CFM / 26.0 TR (8TH FLOOR, ICU) 1nos 11.30 kw 1 Each. 0.00 0.0000
1508. 1508 7000 CFM / 17.0 TR (8TH FLOOR, ICU CARDIOLOGY) 1nos 19.30 kw 3 Each. 0.00 0.0000
1509. 1509 7500 CFM / 18.0 TR (8TH FLOOR, ICU CARDIOLOGY) 1nos 7.50 kw 1 Each. 0.00 0.0000
1510. 1510 4000 CFM / 10 TR (9TH FLOOR, STERILE CORRIDOR) 1nos 3.70 kw 1 Each. 0.00 0.0000
1511. 1511 8000 CFM 20 TR (9TH FLOOR, STERILE CORRIDOR) 1nos 7.50 kw 1 Each. 0.00 0.0000
1513. 1513 10000 CFM / 25.0 TR (9TH, 10TH FLOOR, ICU) 1nos 11.30 kw 2 Each. 0.00 0.0000
1514. 1514 10500 CFM / 26.0 TR (9TH, 10TH FLOOR, ICU) 1nos 15.00 kw 2 Each. 0.00 0.0000
1515. 1515 6000 CFM / 15.0 TR (MGP Room) 1nos 5.50 kw 1 Each. 0.00 0.0000
1516. 1516 4500 CFM / 11.0 TR (10TH FLOOR, O.T-01,03) 1nos 7.30 kw 2 Each. 0.00 0.0000
1517. 1517 4500 CFM / 11.0 TR (9TH FLOOR, CATH LAB-01,02) 1nos 5.50 kw 2 Each. 0.00 0.0000
1518. 1518 4800 CFM / 12.0 TR (9TH FLOOR, CARDIAC O.T. -01) 1nos 5.50 kw 1 Each. 0.00 0.0000
1519. 1519 5500 CFM / 14.0 TR (9TH FLOOR, CARDIAC O.T. -02) 1nos 7.50 kw 1 Each. 0.00 0.0000
SB-32
1520. 1520 4900 CFM / 9.50 TR (10TH,OT-2) 1nos 3.70 kw 1 Each. 0.00 0.0000
1521. 1521 5200 CFM / 13.0 TR (10TH,OT-4) 1nos 5.50 kw 1 Each. 0.00 0.0000
1522. 1522 1100 CFM / 7 TR (8TH FLOOR, ISOLATION-07&08) 1nos 2.20 kw 1 Each. 0.00 0.0000
1524. 1524 1100 CFM / 7.00 TR (8TH FLOOR, ISOLATION-21) 2nos 2.20 kw 1 Each. 0.00 0.0000
1525. 1525 1100 CFM / 7.30 TR (8TH FLOOR, ISOLATION-17) 2nos 2.20 kw 1 Each. 0.00 0.0000
1526. 1526 1400 CFM / 9.50 TR (8TH FLOOR, ISOLATION-11, 25) 2nos 2.20 kw 2 Each. 0.00 0.0000
1528. 1528 16 Sq.mm x 3.0C Cu. Cable 180 Per RMt 0.00 0.0000
1529. 1529 10 Sq.mm x 3.0C Cu. Cable 161 Per RMt 0.00 0.0000
1530. 1530 6 Sq.mm x 3.0C Cu. Cable 270 Per RMt 0.00 0.0000
1531. 1531 4 Sq.mm x 3.0C Cu. Cable 255 Per RMt 0.00 0.0000
1532. 1532 2.5 Sq.mm x 3.0C Cu. Cable 230 Per RMt 0.00 0.0000
1533. 1533 1.5 Sq.mm x 2 C Cu. Cable 315 Per RMt 0.00 0.0000
1534. 1534 1 Sq.mm x 2 C Cu. Cable 320 Per RMt 0.00 0.0000
Water treatment Plant for HVAC System suitable for local raw water
intake to convert in soft water suitable for cooling tower make up
purpose having TDS level up to 500 PPM and PH value around 6.5 of
Resin bed technology type with complete with PVC storage tank of
suitable capacity, Monoblock Pumping system, allied C PVC piping
1535. 1535 1 Lot 0.00 0.0000
network with allied shut off valves, Strainer, Level indicators, pressure
gauges, online water quality measuring instrument, drain, make up and
quick fill connections with valves etc. As per drawings and design
supplied by architect and instruction given by authority and E.I.C.
Capacity : 150000 LPD.
SYSTEM MAINTENANCE: Bidder shall indicate their charges for the
following: Comprehensive preventive maintenance contract for the
entire HVAC plant with BMS System supplied by the HVAC contractor
inclusive of all parts, consumables and labour for all equipment
supplied as well as replacement of any equipment/component/part
which cannot be repaired to the satisfaction of the Client. This contract
will commence after completion of Defects liability period of 1 year of
successful handing over of the system This rate shall be valid for 5
1536. 1536 1 Lot 0.00 0.0000
years from the date of successful Handing over of HVAC system. Scope
included replacemnet of Hepa Filter as and when required Bidder shall
submitt first validation report of HVAC System after commissioning for
handing over purpose. As per drawings and design supplied by
architect and instruction given by authority and E.I.C. (1st Year Cost of
maintenance shall be inclusive in the DLP and no extra payment will be
paid for the maintenance in the first year after handing over)
Maintenance for 1st Year after DLP
1538. 1538 Maintenance for 3rd Year After DLP 1 Lot 0.00 0.0000
1539. 1539 Maintenance for 4th Year After DLP 1 Lot 0.00 0.0000
Tenders Under Creation | Create New Tender | Approve Tender | My Procurements | Edit Tender | Approve Corrigendum | Pre Bid Meeting | Create Offline Tender | Create New Form | Tender BackUp | Bid Evaluation | Bid Evaluation
Reports | Assign Tender Activities | Upload Documents | Tender Summary | Registered Suppliers | Add Limited Suppliers |