Professional Documents
Culture Documents
Company
Position MARK
Signature
3 You must report incidents and unsafe situations or practices. TRUE FALSE
Before starting any work, all necessary measures must be in place.
Page 1 of 3
HSE ORIENTATION STANDARD
TEST OF COMPETENCE Model 01
4 Work areas shall be kept clean and free of trash, rubbish and debris at all TRUE FALSE
times.
5 You are not allowed to operate vehicles, equipment, etc. unless you are fully TRUE FALSE
trained, qualified, authorized and medically fit to do it safely.
Vehicles and equipment must be tagged with the current safety colour.
6 Only competent persons are authorized to perform work on any electrical TRUE FALSE
system; they must be competent through adequate knowledge, ability, training
and experience.
7 To remove any protection, you must ask authorization on the Safety TRUE FALSE
department. Meanwhile, an alternative safety measure shall be used, per
example harnesses, fall arresters, lifelines, anchor points, etc. Barriers and
safety signs must be placed to avoid any entrance. Completed the work, the
removed safety measures must be reinstalled.
8 To do hot work, you don’t need to remove flammable products from the work TRUE FALSE
area, so that you have a fire extinguisher close to you.
9 It is not mandatory to wear safety glasses under the face protection for TRUE FALSE
grinding, welding... It is recommended.
?
0.5 m.
Page 2 of 3
HSE ORIENTATION STANDARD
TEST OF COMPETENCE Model 01
12 You cannot use a scaffold without a green tag, even if the scaffold looks totally TRUE FALSE
safe.
13 This image shows how to prevent a tool from falling. TRUE FALSE
14 During works at a height, the surrounding area must be marked out. TRUE FALSE
15 Fall prevention and protection measures should be implemented whenever a TRUE FALSE
worker is exposed to the hazard of falling more than 1.8 meters.
16 A key objective of the Permit To Work system is to ensure the proper TRUE FALSE
authorisation of designated work. This may be work of certain types, or work
of any type within certain designated areas other than normal operations.
17 A Permit To Work must specify the precautions to be taken, including safe TRUE FALSE
isolation from potential risks such as hazardous substances, electricity and
other energy forms.
18 Waste material, rubbish and debris must be removed from the work areas, as TRUE FALSE
soon as reasonable possible, and placed in the appropriate containers, by the
own company which has produced them.
20 Only, at the end of the day the work areas must be cleaned and left free of TRUE FALSE
trash, rubbish and debris.
Page 3 of 3