Professional Documents
Culture Documents
FEED
1. PFDs
2. P&IDS
3. Line List
4. Equipment List
5. Material Selection Report
6. MRs for mechanical (rotary / static) equipment
7. MRs for Instruments
8. MRs for piping material
9. Piping Material Specification
10. MRs for Electrical items (transformers / sub-
station)
11. Hazardous Area Classification Drawings
12. Operating, Control & Safeguarding Philosophy
13. Piping General Arrangement Drawings
14. Modeling & Simulation Reports
15. MRs for Civil
16. Fire & Gas Detection Philosophy
17. Equipment Layout and Plot Plans
18. Cause & Effect Diagrams
Reduce the overall schedule by about 4-6 months due to the overlapping activities with PDP;
Profit generation
Allow Licensee to involve a more competitive local EPC contractor without a specific experience
Support to EPC contractor during project implementation
A Basis of Engineering and Design Data (BEDD) is the basis or basic information of the
design and engineering work processes with applicable specifications, codes, standards as well
as regulations that defines a common basis for the design of the process and utility units. A
BEDD is developed by an engineering contractor or a consultant in accordance with BEDQ
(Basis of Engineering and Design Questionnaire) responses and contractor's experiences and
knowledges with the standard specifications and regulations. A BEDD is a deliverable document
of the FEED, Basic Engineering, and Detailed Design and Engineering.
BEDQ
Basis of Engineering and Design Questionnaire (BEDQ) is a contractor prepared
questionnaire document to be provided information by the plant owner for the development of
the Basis of Engineering and Design Data (BEDD).
https://m.blog.naver.com/PostList.naver?blogId=woon0521
FEED Case-1 EPCC with unique design field
FEED Case-2 EPCC
3D model