The document provides instructions for a roofing tutorial assignment calculating rafter dimensions, slope area, and roof tile quantity for a rectangular structure with a gable roof. Learners must calculate the rafter rise with a 5:12 slope ratio, determine the slope area given a 900mm overhang, and estimate the quantity of Luminary roof tiles needed for the roof allowing for 5% wastage/overage.
The document provides instructions for a roofing tutorial assignment calculating rafter dimensions, slope area, and roof tile quantity for a rectangular structure with a gable roof. Learners must calculate the rafter rise with a 5:12 slope ratio, determine the slope area given a 900mm overhang, and estimate the quantity of Luminary roof tiles needed for the roof allowing for 5% wastage/overage.
The document provides instructions for a roofing tutorial assignment calculating rafter dimensions, slope area, and roof tile quantity for a rectangular structure with a gable roof. Learners must calculate the rafter rise with a 5:12 slope ratio, determine the slope area given a 900mm overhang, and estimate the quantity of Luminary roof tiles needed for the roof allowing for 5% wastage/overage.
The floor plan below shows the upper floor of a rectangular structure, with a gable roof as indicated by the dotted lines. The overhang is 900mm. o Calculate the rise in rafter if the slope ratio is required to be 5:12. (6 marks) o If the overhang is 900mm, then find the slope area of the roof (the Area-Rake conversion table is seen to the left). (6 marks) o After contacting a roofing company, you are informed that a type of roofing tile called ‘Luminary’ is estimated to cover 1m2 of slope area with 2.76 tiles. Estimate the quantity of Luminary tiles required for the roof in the given image, with a wastage/overage of 5%. (8 marks)
Computational Fluid Dynamics (CFD) Blog - LEAP Australia & New Zealand - Turbulence Part 3 - Selection of Wall Functions and Y - To Best Capture The Turbulent Boundary Layer