You are on page 1of 1

8T156_Rev.

02

Top-Page

11.The charging time depends on the supported charging protocol, power,


APPLICATION GUIDE battery capacity, charging line quality and other factors decided by the
charged device itself
International socket with
USB and Switch 12.Do not insert foreign objects (e.g. small metal wires, paper clips, liquids, etc.)
into USB charger
Thank you for choosing Schneider Electric AvatarOn series products. To ensure 13.User will feel some heat at the product surface when charging is in progress
proper application of our product, please read through the following information 14.Indoor use only
before installation and use.
This application guide applies to the following products.
(Notes:suffix_WE/WG/GH/LW/WD/ST_C5/G2 etc. mean the colors and sales areas)

Cat. No. Description


WIRING DIAGRAMS
E8 3 1 5 T SU 1 0 A 2 5 0 VAC 1 Gang international s ocke t
with US B and s witch

SPECIFICATIONS
Earth
USB rated input :220-250V~, 50 / 60 Hz, 0.45A Live
L N
USB Output :5V 2.1A Max
Neutral
USB Protection :Over heat,output over current, output over
voltage,output short circuit
Socket rated voltage :250V~
NNZ3819201 V00

Socket rated current :10A


Mounting centre :60.3mm
Operation Temperature :0-40°C

IMPORTANT NOTE MOUNTING INSTRUCTION


1. The products must be installed by qualified electricians. 1. Connect the wires to the terminals (recommend to leave 10-12mm bare metal
2. Please check your local wiring regulations before installation. wire) and tighten the terminal screws.
3. This permanently connected equipment does not contain internal 2. Screw the product module onto the wall box.
disconnected device, a readily accessible disconnected device should be
provided externally. 3. Snap the surround.
4. This product can only be applied at altitudes below 2000 m.
5. Please install with a British Standard wall box of 47mm depth to aid correct
operation of the product. The product should be mounted on concrete or other
non-combustible surfaces only.
6. Please shield / mask the product before renovation to avoid contamination
and degradation.
7. Please keep the front cover safe in order to prevent damages before and
during installation. Wall Box

8. If the product is not firmly fixed, it may cause electric shock.


Product Module
9.Turn off the power supply when cleaning the product. Use a piece of soft and
dry cloth to wipe off the dirt and contamination on the surface. Do NOT use
corrosive chemicals. Mounting Screw
10.Before charging with the product, please ensure the battery of your device is
complied with Battery Charging Specification. Do not use multi-adaptors.
Reserve charging is not allowed. Surround

Insert a screwdriver into the


clip lock, and twist the
screwdriver to remove the
surround.

User Manual
英文地区适用

> Note:
1/ 70g high quality uncoated Book-Paper (white).
2/ Double side printing. PANTONE
DIE-CUT Black C

> Folding / Appearance & Size :


m
85.0m

Top-Page
DECN202024440 Initial Release Amanda 00
DECN/ECN/TCAN DESCRIPTION DRN REV > ARTWORK :
File Size = A3
NUMBER : Revision: Sheet: 85.0mm

NNZ3819201 00 1/1

You might also like