Professional Documents
Culture Documents
Name: John Vincent B. Mercado Year & Section: 1st year BSECE - 1A
Instructor: Walvies Mc Alcos Date: October / 16 / 2021
4.2 Pre-Assessment
4.4 Assessment
1. Discuss on how you can use at least 3 of the discussed object snap tools
identified on this packet. (10points)
PERPENDICULAR- to use it, make sure you have a perpendicular snap turned on.
Start the line command and click at a point to the reference line and then move
your cursor over the reference line. The perpendicular snap will show up at the
point of perpendicularity on the reference line.
CENTER- select the center snap from the object snap list. One of the curve
objects then select any draw command like line tool and hover your cursor near the
perimeter of the circular object. Hovering near the perimeter of the object will
cause a plus-sign to appear in the center of the object. The green center object-
snap icon should wrap around the white-plus sign.
MIDPOINT- with the snap selected and a draw command active move your cursor
close to the mid-point of a line or arc. A green triangle indicating midpoint will
show up and when you click the cursor will snap exactly to the midpoint.