Professional Documents
Culture Documents
F.1 Purpose
The Garmin GI 275 display instrument, installed by STC SA02658SE, may be installed with a
G3X PFD on certified aircraft to provide standby Attitude, Altimeter, and Airspeed Indicator
functions (except in G3X installations which include Copilot displays).
This section of the G3X installation manual describes requirements unique to this configuration.
Reference Garmin GI 275 Part 23 AML STC Installation Manual (190-02246-10) for information
beyond the scope of this document. To use the GI 275 as a standby flight display, perform the
following:
• The GI 275 backup battery pack must be retained and installed.
• The GI 275 must be configured as a Primary ADI (as defined in the GI 275 Part 23
AML STC Installation Manual) with display of attitude, altitude, and airspeed.
• The GI 275 STC requires that the GI 275 be installed in the primary field-of-view of
the pilot (±15° from centerline). The G3X STC approves moving the GI 275 to an
appropriate standby location which is described in this appendix.
• When the GI 275 is installed as a standby flight display, the G3X STC allows the
existing analog airspeed indicator, altimeter, vertical speed indicator, attitude gyro,
DG/HSI and rate-of-turn indicator to be removed as these functions are replaced by
the G3X Touch EFIS in normal operations with GI 275 as a standby.
GI 275 models approved for use as a G3X standby instrument are shown below in Table F-1.