Professional Documents
Culture Documents
Contact Us
Welcome to Megazyme
To further support you, our valued customer, we have developed the Megazyme Mega-CalcTM to assist you in calculating the
concentration of analyte (as g/L or g/100 g) from raw absorbance data.
Use Mega-Calc
3. Insert absorbance values for the blanks and 6. Moisture content & "dwb"
samples Input the moisture content of the
If duplicate samples have been run, insert both sample. Fructan (g/100g) "dry weight
absorbance values and the program will basis" (dwb) is automatuically
automatically use the average values. If a single calculated.
set of values are input, these will be used.
5. Dilution
If samples are diluted enter the dilution factor.
4. Sample weight If samples are not diluted (e.g. samples containing
Enter the sample weight (e.g. approximately 100 upto 40% (w/w) fructan) the dilution factor is 1.
mg or 400 mg) correct to the nearest 0.1 mg. Samples containing 40-100% fructan are diluted 3-
fold, for these enter 3.
Contact Us
Further Support
To obtain further information about the
specific test, or indeed any of the Megazyme
products, please consult our web site.
www.megazyme.com