Professional Documents
Culture Documents
TEST OBJECT Live tank SF6 gas circuit breaker with one-pole separated operating mechanism
DESIGNATION 120-SFM-40AA
145 kV 3 150 A 40 kA 50 Hz
The other tests (STC, BTF, DEF, SLF, OP2, BC/CC/LC and shunt reactor current switching tests) were carried out
on circuit breaker with three-pole common operaing mechanism. The test certificate of short-circuit and
switching performance(Issue No. : 2018TC00136, 2018) provides verification of the short-circuit and switching
ratings assigned by the manufacturer.
This Type Test Certificate has been issued by KERI following exclusively the STL Guides.
The results are shown in the record of Proving Tests and the oscillograms attached hereto. The values obtained
and the general performances are considered to comply with the above Standard and to justify the ratings
assigned by manufacturer as listed on page No. 3.
The Certificate applies only to the test object. The responsibility for conformity of any apparatus having the same
dOnlyi integral
ti reproduction
ith th t t tofd this t Certificate
ith th isM permitted
f t without written permission from KERI. Electronic copies in
PDF-format or scanned version of this Certificate may be available and have the status "for information only". The sealed
version of the Certificate is the only valid version.
Song, Jae-Sung
An Acting President
2018-02-27
Table of contents
Items Sheet No.
Table of contents 2/35
Ratings 3/35
List of the tests 4/35
Test results 5/35 - 9/35
Photographs 10/35 - 11/35
Circuit diagrams and parameters 12/35 - 13/35
Drawings 14/35 - 15/35
Attachments -
Oscillograms 16/35 - 35/35
Tested by :
Lee, Kyoung-Jun KERI
Witnessed by :
Shekhar Shete CG POWER AND INDUSTRIAL SOLUTIONS LIMITED
Ghanashyam Patil CG POWER AND INDUSTRIAL SOLUTIONS LIMITED
Sudhendra Rao CG POWER AND INDUSTRIAL SOLUTIONS LIMITED
Sunil Kulthe CG POWER AND INDUSTRIAL SOLUTIONS LIMITED
Drawings :
The manufacturer has guaranteed that the test object submitted has been manufactured in accordance with the
following drawings. KERI has verified that these drawings adequately represent the test object.
The following drawings have been returned to the manufacturer and listed for reference.
Ref. No. Drawing No.(Rev. No.) Title Date
003 3922993 (1) INTERRUPTER PORCELAIN 145KV 17.06.17
004 3922528 (3) SUPPORT PORCELAIN 145KV 17.05.31
005 3922479 (0) STATIONARY ARC CONTACT 16.08.04
006 4922614 (1) MOVING ARC CONTACT 17.02.06
007 3949227 (16) STATIONARY LAMELLA CONTACT 17.07.14
008 3942819 (8) MOVING CONTACT 17.03.31
009 3922583 (5) MAIN NOZZLE 17.09.10
010 4911410 (3) AUXILIARY NOZZLE-1 17.06.22
011 4923258 (0) MECHANISM HOUSING ASSY 17.09.10
012 JN468979 (13) CLOSING SPRING 17.08.29
013 JN468980 (12) SPRING 16.10.03
014 2923053 (0) INTERUPPER ASSY 145 LEM 17.08.02
015 4922497 1/2 (0) LATCHING MECHANISM 16.08.12
016 4922497 2/2 (0) LATCHES DETAIL 16.08.12
017 1922660 (1) POLE UNIT ASSEMBLY LEM DESIGN 17.04.03
Live tank SF6 gas circuit breaker with one-pole separated operating mechanism
Manufacturer CG POWER AND INDUSTRIAL SOLUTIONS LIMITED
Designation 120-SFM-40AA
Serial number 52413C
Type of operating mechanism Single-pole separated operation, Motor-spring
Measurements uncertainty
The measurement uncertainties listed below are the expanded uncertainties at the confidence level of approximately
95 % (coverage factor = 2) guaranteed by KERI.
Test results
V V ms ms
O - 110 - 25.0
HPC 17-380-001
0.3 s
110 110 63.5 24.2
CO
O - 121 - 24.1
HPC 17-380-003
0.3 s
121 121 61.3 24.0
CO
O - 77 - 27.1
HPC 17-380-005
0.3 s
93.5 77 66.4 26.3
CO
Test requirements
Test frequency 50 Hz
Operating sequence Cs
Test results
Applied
voltage Make
Test Pre-arc Make
Operation delay
Test number Arc current time time Remarks
r.m.s. time
initiation
kV kV kA μs ms ms
Condition during Test object normally operated and showed no external damages.
and after test After tests, test object was opened at the first attempt.
Test requirements
TRV First pole : u1 = 133 kV, t1 = 67 μs, uC = 249 kV, t2 = 268 μs, td = 2 μs, RRRV = 2.0 kV/μs
Test frequency 50 Hz
Test results
Test current
Opera- Last loop TRV Arcing Break
Test number tion Making Break- di/dt th Dura- peak time time Remarks
ing Peak
tion
kA kA A/μs μs kA ms kV ms ms
HPC 17-380-018 Os - 41.5 17.9 288 61.5 10.4 252 10.4 37.4 tarc min
Test to prove
HPC 17-380-019 Os - 41.3 17.9 278 61.4 10.5 - (9.5)* -
tarc min
HPC 17-380-023 CdOs 60.0 42.4 17.9 298 57.9 10.1 252 14.0 40.8
1)
HPC 17-380-024 CdOd 116.4 41.7 - - 53.9 9.7 - 13.9 40.6
Condition during
Test object normally operated and showed no external damages.
and after test
Test results
V V ms ms
O - 110 - 23.0
HPC 17-380-025
0.3 s
110 110 69.9 22.1
CO
5 Description of tests
5.1 The tests were carried out in accordance with IEC 62271-100:2017-06, subclause 6.102.7(Alternative
operating mechanism).
5.2 The verification tests between circuit-breaker with one-pole separated operating mechanisms and
circuit-breaker with three-pole common operated mechanisms were performed and complied with the
requirement in the standard. Refer to the type test certificate of short-circuit and switching performance
with three-pole common operated mechanism (Issue No. : 2018TC00136, 2018). The end.
Photographs
Photo. HP01 : Test object after basic short-circuit tests (T100s(a) & T100s(b))
Photographs
GEN
PMS
Ig
ITMC
HVTR
Vp Vt
GEN : Generator ACB : Auxiliary circuit breaker PMS : Plasma making switch
MS : Making switch TO : Test object
ITMC : Initial transient making
BB : Back-up breaker R : Resistor current
CLR : Current limiting reactor C : Capacitor HVTR : High voltage transformer
TR : Transformer L : Reactor
Circuit parameters
Supply circuit Load circuit
Impedance Ω 0.5 Short-circuit point earthed
Frequency Hz 50
Power factor < 0.1
Neutral -
GEN
LM1
RT1
Ig Gap
CT1
CM1
It
LM2
RT2
Vt Gap
CT2
CM2
GEN : Generator ACB : Auxiliary circuit breaker Reig : Arc extension system
MS : Making switch TO : Test object Gap : Spark gap
BB : Back-up breaker R : Resistor
CLR : Current limiting reactor C : Capacitor
TR : Transformer L : Reactor
Circuit parameters
Current source Load circuit Prospective TRV
Impedance Ω 0.42 Short-circuit point earthed u1 kV 136
Frequency Hz 50 uc kV 251
Power factor < 0.1 t1 μs 65
Neutral - t2 or t3 μs 265
RRRV kV/μs 2.09
td μs 1
Injection circuit
fh Hz 698
Drawings
Drawings
20
HPC 17- 380- 001
10
Contact [ V]
- 10
- 20
6.5
Stroke [ V]
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 17/35
20
HPC 17- 380- 002
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 18/35
20
HPC 17- 380- 003
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 19/35
20
HPC 17- 380- 004
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 20/35
20
HPC 17- 380- 005
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 21/35
20
HPC 17- 380- 006
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 22/35
20
HPC 17- 380- 007
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 23/35
200 k
HPC 17- 380- 011
100 k
Vt [ V]
- 100 k
- 200 k
100 k
50 k
It [ A]
- 50 k
- 100 k
7
Stroke [ V]
10
5
Coil_Close [ A]
-5
- 10
Time [ s]
2018TC 00182 24/35
200 k
HPC 17- 380- 011
100 k
Vt [ V]
- 100 k
- 200 k
100 k
50 k
It [ A]
- 50 k
- 100 k
Time [ s]
2018TC 00182 25/35
300 k
HPC 17- 380- 018
200 k
100 k
Vt [ V]
0
- 100 k
- 200 k
- 300 k
100 k
50 k
It [ A]
0
- 50 k
- 100 k
5k
2k
Iinj [ A]
0
-2k
-5k
7
Stroke [ V]
6
6
5
10
Coil_Close [ A]
5
0
-5
- 10
10
Coil_Open [ A]
5
0
-5
- 10
Time [ s]
2018TC 00182 26/35
300 k
HPC 17- 380- 018
200 k
100 k
Vt [ V]
- 100 k
- 200 k
- 300 k
20 k
10 k
It [ A]
- 10 k
- 20 k
5k
2k
Iinj [ A]
-2k
-5k
Time [ s]
2018TC 00182 27/35
300 k
HPC 17- 380- 019
200 k
100 k
Vt [ V]
0
- 100 k
- 200 k
- 300 k
100 k
50 k
It [ A]
0
- 50 k
- 100 k
5k
2k
Iinj [ A]
0
-2k
-5k
7
Stroke [ V]
6
6
5
10
Coil_Close [ A]
5
0
-5
- 10
10
Coil_Open [ A]
5
0
-5
- 10
Time [ s]
2018TC 00182 28/35
300 k
HPC 17- 380- 019
200 k
100 k
Vt [ V]
- 100 k
- 200 k
- 300 k
20 k
10 k
It [ A]
- 10 k
- 20 k
5k
2k
Iinj [ A]
-2k
-5k
Time [ s]
2018TC 00182 29/35
300 k
HPC 17- 380- 022
200 k
100 k
Vt [ V]
0
- 100 k
- 200 k
- 300 k
100 k
50 k
It [ A]
0
- 50 k
- 100 k
5k
2k
Iinj [ A]
0
-2k
-5k
7
Stroke [ V]
6
6
5
10
Coil_Close [ A]
5
0
-5
- 10
10
Coil_Open [ A]
5
0
-5
- 10
Time [ s]
2018TC 00182 30/35
300 k
HPC 17- 380- 022
200 k
100 k
Vt [ V]
- 100 k
- 200 k
- 300 k
20 k
10 k
It [ A]
- 10 k
- 20 k
5k
2k
Iinj [ A]
-2k
-5k
Time [ s]
2018TC 00182 31/35
300 k
HPC 17- 380- 023
200 k
100 k
Vt [ V]
0
- 100 k
- 200 k
- 300 k
100 k
50 k
It [ A]
0
- 50 k
- 100 k
5k
2k
Iinj [ A]
0
-2k
-5k
7
Stroke [ V]
6
6
5
10
Coil_Close [ A]
5
0
-5
- 10
10
Coil_Open [ A]
5
0
-5
- 10
Time [ s]
2018TC 00182 32/35
300 k
HPC 17- 380- 023
200 k
100 k
Vt [ V]
- 100 k
- 200 k
- 300 k
20 k
10 k
It [ A]
- 10 k
- 20 k
5k
2k
Iinj [ A]
-2k
-5k
Time [ s]
2018TC 00182 33/35
300 k
HPC 17- 380- 024
200 k
100 k
Vt [ V]
0
- 100 k
- 200 k
- 300 k
100 k
50 k
It [ A]
0
- 50 k
- 100 k
5k
2k
Iinj [ A]
0
-2k
-5k
7
Stroke [ V]
6
6
5
10
Coil_Close [ A]
5
0
-5
- 10
10
Coil_Open [ A]
5
0
-5
- 10
Time [ s]
2018TC 00182 34/35
20
HPC 17- 380- 025
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]
2018TC 00182 35/35
20
HPC 17- 380- 026
10
Contact [ V]
- 10
- 20
7.5
7
Stroke [ V]
6.5
5.5
10
5
Coil_Close [ A]
-5
- 10
10
5
Coil_Open [ A]
-5
- 10
Time [ s]