Professional Documents
Culture Documents
MATERIALS
If you have questions, don’t hesitate to ask your Trainer for assistance.
If you have already some knowledge and skills covered in this module
because you have been working for some time; or already completed training
in this area; or if you can demonstrate competence to your Trainer in a
particular skill, talk to your Trainer so you don’t have to undergo the same
training again. If you have a qualification or Certificate of Competency from
previous training show it to him/her. If the skills you acquired are
consistent with and relevant to this module, they become part of the
evidence. You can present these for RPL. If you are not sure about your
competence skills, discuss this with your Trainer.
In this module, you will find the activities for you to complete and
relevant information sheets for each learning outcome. Each learning
outcome may have more than one learning activity.
I
TABLE OF CONTENTS
Page
HOW TO USE THIS COMPETENCY-BASED LEARNING MATERIAL I
TABLE OF CONTENTS II
LIST OF COMPETENCIES III
MODULE CONTENT IV
LEARNING OUTCOME SUMMARY 1
(LO # 2 Prepare Installer)
LEARNING EXPERIENCES 3
INFORMATION SHEET 1.2.1 Portable Bootable Devices 5
Self-Check 1.2-1 8
Answer Key 1.2.1 9
Task Sheet 1.2-1 Create Portable Bootable Devices 10
Performance Criteria Checklist 1.2-1 11
INFORMATION SHEET 1.2-2 Customize Operating System Installer 12
Self-Check 1.2-2 36
Answer Key 1.2-2 37
Task Sheet 1.2-2 Customize Operating System Installer 38
Performance Criteria Checklist 1.2-2 39
INFORMATION SHEET 1.2-3 Installation Portable Application 40
Self-Check 1.2-3 47
Answer Key 1.2-3 48
Task Sheet 1.2-3 Install Portable Application 49
Performance Criteria Checklist 1.2-3 50
REFERENCES 51
DEFINITION OF TERMS 52
II
COMPETENCY-BASED LEARNING MATERIALS
List of Competencies
Installing and
Install and Configure ELC724331
1. Configuring Computer
Computer System
System
III
MODULE CONTENT
System
LEARNING OUTCOMES:
At the end of this module you MUST be able to:
1. Assemble computer hardware.
2. Prepare Installer.
3. Install operating system and drivers for peripherals/ devices.
4. Install application software.
5. Conduct testing and documentation.
IV