Professional Documents
Culture Documents
Assymodel
Assymodel
Fundamentals
Assembly Modeling
Create many simple features, not a few complex ones. Redefinition is more
difficult with complex features, It is easier to regenerate a simple sketch than a
complex one.
Create relations between dimensions in a sketch using part mode relations, not
Sketcher relations. Sketcher relations are not editable in part mode.
B. Assembly Organization
Organize your assembly in a logical assembly structure. Create subassemblies
whenever possible. See figure below:
http://doc6.diebold.com/opemmancad/fund/assymodel/assymodel.html 9/17/2004
DIEBOLD - Pro/ENGINEER Help - Assembly Modeling Página 2 de 3
Datums should be named using appropriate and logical names. This allows
SEL BY MENU functionality when referencing any datums even when
datums are layered off or not displayed.
http://doc6.diebold.com/opemmancad/fund/assymodel/assymodel.html 9/17/2004
DIEBOLD - Pro/ENGINEER Help - Assembly Modeling Página 3 de 3
D. Assembly Content
Minimize the amount of detail put into the assembly. More detail means that a
regeneration will take longer and your assembly size will be larger. Assemble
only enough components to define the assembly design (i.e. avoid assembling
unnecessary hardware parts).
Main Index
March 3, 1997
http://doc6.diebold.com/opemmancad/fund/assymodel/assymodel.html 9/17/2004