Professional Documents
Culture Documents
Tempdrawcreate
Tempdrawcreate
Página 1 de 3
Drawings
Manufacturing Remote Site Temporary Drawing Creation
z If the Model Shop stamp is the current rev, add your last name to the
"Mfg Approved By:" box.
z If the Model Shop stamp is not the current one, you will need to delete
it.
z If the Model Shop stamp is not there, you will need to add it
http://doc6.diebold.com/opemmancad/drawing/tempdrawcreate.html 9/17/2004
DIEBOLD - Pro/ENGINEER Help - Manufacturing Remote Site Temporary Drawi... Página 2 de 3
4. Wait for "Plotter data file has been created" message. (Note: file created
will be placed in your C:/Temp directory. The file name will be your drawing
name with a .ps extension.)
8. Under the "EDIT" pull down menu, choose "Convert to vector format"
http://doc6.diebold.com/opemmancad/drawing/tempdrawcreate.html 9/17/2004
DIEBOLD - Pro/ENGINEER Help - Manufacturing Remote Site Temporary Drawi... Página 3 de 3
be the last drawing created, not the current one you are
working on. Make sure you change it to the current drawing
you want to create.) Click "SAVE" button and wait for
hourglass to disappear. (Note: file created will be in your C:/
Temp directory)
Main Index
September 13, 2000
http://doc6.diebold.com/opemmancad/drawing/tempdrawcreate.html 9/17/2004