Professional Documents
Culture Documents
1
Q3)
A scalar has only magnitude and a vector has magnitude and direction.
weight [2]
2
Horizontal Component = 7.5 * cos 40 = 5.75N
3
Q5a) Determine the reading on the Vernier Calipers:
Note 1 mark for each question in Q5.
0.28 cm
4
Q5b) Determine the reading on the Vernier Calipers:
0.60 cm
+0.09 cm
5
Q5d) Determine the reading on the Vernier Calipers:
-0.09 cm
6
Q5e) Determine the reading on the Vernier Calipers:
2 Marks for this Question.
1.40 cm
7
Q6a) Determine the reading on the Micrometer Screw Gauges:
Note 1 mark for each question in Q6.
12.18 mm
8
Q6b) Determine the reading on the Micrometer Screw Gauges:
15.09 mm
9
Q6c) Determine the reading on the Micrometer Screw Gauges:
+0.50 mm
10
Q6d) Determine the reading on the Micrometer Screw Gauges:
Q7) Briefly describe the error that will give you the same amount of
error after numerous measurements and why you get the same error.
(2 Marks).
Look up a YouTube video to help you, here is an example:
https://www.youtube.com/watch?v=DNGJTxpxX3c
11
Q8)
Q9)
Write a few sentences (at least 100 words) about the difference
between precision and accuracy. [3]
Look up a few YouTube videos to help you, here are some examples:
https://www.youtube.com/watch?v=hRAFPdDppzs
https://www.youtube.com/watch?v=0IiHPKAvo7g
12