Report of Examination of Hoists, Lift, Lifting Machine, Chains, Ropes and Lifting Tackles Certificate No.: ESES/SVS/TC/21-22/1158 Date: 18.06.2022 Name of the Occupier (or Factory) : M/s.SVS PROJECTS INDIA PVT.LTD C/O W (DSR) Site, Situation address of Factory Near Chirec School, Kondapur, Hyderabad, Telangana - 500084 1 (a) Type of Hoist or Lift or Lifting Machinery/ : Tower Crane Capacity 6 Ton, Make: ACE, TC5540 Tackle and identification number or description. (b) Date of Construction or Reconstruction : (if ascertainable) 2 Design and Construction (Are all parts of the Hoist or : Erected on RCC Base, Height of the tower crane is 32M, Lift or Lifting Machinery / Tackle of good mechanical Boom length 50 M, Revolving Structural Lattice Jib, freely construction, sound material and adequate strength as moving trolly, Trolley rope dia 8MM, Hoist Rope dia 13MM far as ascertainable.) ,4 FALL, Counter Weight 12ton. 3 Distinguished Number of mark (if any) and : Identification No: T4191880 Description sufficient to Identify the Lifting Machine, Chain ropes or the Lifting Tackle. 4 Maintenance: Are the following parts of the Hoist or Lift : properly maintained and in good working order? If not, state what defects have been found a) Enclosure of Hoist way or Lift way : NA b) Landing gates and cage gate(s) : Not Applicable c) Interlocks on the landing gate(s) and cage gate(s) : Not Applicable d) Other gates, fastenings : Not Applicable e) Cage and Platform and fittings, guiders, : Not Applicable buffers, interior of the Hoist way or Lift way f) Over-running devices : Check & found in working condition g) Suspension ropes or chain and their attachments : Wire Rope Check and Found satisfactory. h) Safety gear i.e. arrangements for prevention : Satisfactory fall of platform or cage brakes i) Brakes : Found Satisfactory working condition j) Worm or spur gearing : Not Applicable k) Other electrical equipment : Satisfactory l) Other parts : Satisfactory 5 What parts (if any) were inaccessible : All parts accessible 6 (a)Repairs renewals or alternations (if any) required and Nil the period within which they Should be executed. : (b) Particulars of the parts of Hoists or Lifts or Lifting Nil Machinery / Tackle rejected after the examination. : 7 Maximum safe working load subject to repairs, renewals NA or alterations (if any) specified in Column (6) : 8 Others : Load test Carried out in my presence for 2.6ton Limit switch acted at 35Meter. I/We certify that on. 18.06.2022, I/We thoroughly examined the hoist, lift, lifting machine, ropes and lifting tackles and details of examinations/tests carried out is enclosed herewith that the above is a correct report of the result. Certificate Valid up to 17.12.2022