Professional Documents
Culture Documents
JP13049A JP13010 Metric
JP13049A JP13010 Metric
Timken Part Number JP13049A - JP13010, Tapered Roller Bearings - TS (Tapered Single)
Metric
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
RELATED PRODUCTS
RELATED PRODUCTS
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series JP13000
2.1 Kg
Bearing Weight
4.7 lb
Dimensions
130 mm
d - Bore
5.1181 in
185.000 mm
D - Cup Outer Diameter
7.2835 in
27.000 mm
B - Cone Width
1.0630 in
21.000 mm
C - Cup Width
0.8268 in
29.000 mm
T - Bearing Width
1.1417 in
8.9 mm
a - Effective Center Location3
0.35 in
283000 N
C0 - Static Radial Rating
63600 lbf
Factors
K - Factor7 1.24
radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
21.000
4.8
27.000
185.000
130.000
172.0
136.9
149.1
179.1
8.9
METRIC UNITS
ISO Factor - e 0.47
ISO Factor - Y 1.27 JP13049A - JP13010
Bearing Weight 2.1 kg TS BEARING ASSEMBLY
Number of Rollers Per Row 26
Effective Center Location 8.9 mm
K Factor 1.24
Dynamic Radial Rating - C90 50800 N
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 41100 N
NORTH CANTON, OHIO USA Static Radial Rating - C0 283000 N
Dynamic Radial Rating - C1 196000 N
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY