Professional Documents
Culture Documents
Phao MB (CMM 25-69-30)
Phao MB (CMM 25-69-30)
(CMM 25-69-30)
6. All the floats compartments are fitted with pressure relief valves
calibrated at an opening gage pressure: (2) (3)
Page 1
Page: 2
a) P = 240 hPa
b) P = 345 hPa.
c) P = 370 hPa.
Refer : ( Page 5/ 2)
7. R/H AFT float assembly is made of two polyamide backing fabrics
coated on one and both sides with polyurethane: (1)
a) Correct.
b) Incorrect.
Refer : ( Page 11/ B 2)
a) Correct.
b) Incorrect.
10. Inflate the float to a pressure to Carry out a leak test: (2) (3)
a) 150 hpa.
b) 170 hpa.
c) 200 hpa.
Refer : ( Page 505/ F.4)
a) 150 hpa.
b) 170 hpa.
Page 2
Page: 3
c) 180 hpa.
Refer : ( Page 505/ F.4)
12. After 3 hours, check the pressure drop, which should not exceed: (2)
(3)
a) 50 hpa.
b) 60 hpa.
c) 80 hpa.
Refer : ( Page 507/ F.5)
13. Standard proof pressure test inflate the float through the various
Manual inflating/deflating valves simultaneously, until pressure is
stabilized at the standard test value of: (2) (3)
a) 300 hpa.
b) 360 hpa.
c) 400 hpa.
Refer : ( Page 507/ 1.d)
a) Correct.
b) Incorrect.
a) 250 hPa.
b) 260 hPa mini.
c) 270 hPa.
Refer : ( Page 508/ f)
a) Correct.
b) Incorrect.
a) 190 hpa.
b) 200 hpa.
c) 210 hpa
Refer : ( Page 508/ D.1)
a) 150 hpa.
b) 170 hpa.
c) 180 hpa.
Refer : ( Page 508/ D.2)
(2) (3)
a) 150 hpa.
Page 4
Page: 5
b) 162 hpa.
c) 170 hpa.
Refer : ( Page 508/ D.3)
a) In case of ditching.
b) In case of serious defects found during the Minor inspection:
c) After 10 years.
d) In case of accidental inflation.
e) All.
Refer : ( Page 509/ G)
22. After repairing patch. Let the adhesive dry for at least: (1)
a) 24 hours.
b) 46 hours.
c) 64 hours.
Refer : ( Page 608/ f)
23. How many hours after the proof pressure test, perform a leak
test: (1)
a) 12 hours.
b) 20 hours.
c) 30 hours.
Refer : ( Page 608/ h)
Page 5
Page: 6
a) 0.5 daN.m.
b) 1 daN.m.
c) 2 daN.m.
Refer : ( Page 801)
a) 0.5 daN.m.
b) 1 daN.m.
c) 2 daN.m.
Refer : ( Page 801 )
a) 0.5 daN.m.
b) 1 daN.m.
c) 2 daN.m.
Refer : ( Page 801 )
a) 0.5 daN.m.
b) 0.8 daN.m.
c) 0.9 daN.m.
Refer : ( Page 801 )
Page 6