Professional Documents
Culture Documents
SECTION – A
SECTION – B
a) CO1 5
Derive an expression for the expression of the extension in a tapered circular bar?
b) CO1 5
In a tensile test on a steel tube of external diameter of 18 mm & internal diameter 12 mm, an
axial pull of 2KN produces stretch of 6.72 x 10 -3 mm in a length of 100 mm and a lateral
contraction of 3.62x10-4 mm in outer diameter calculate the value of three modullii &
c) CO1 5
Poisson’s ratio of the material
What is the meant by COP? Set up relation for the COP of a heat pump and that of a
a) CO2 refrigerator. Proceed to show that 5
(COP) heat pump = 1 + (COP) refrigerator
b) CO2 Compare SI engine with CI engine 5
What is meant by comfort air-conditioning? Give brief description of its various type
c) CO2 5
SECTION – C
a) CO1 10
An aluminum rod is rigidly attached between a steel rod & bronze rod as given in figure.
Axial load are applied at the position indicated. Find maximum value of P that will not
exceed a stress in steel of 140 MPa, in aluminum of 90 MPa & in bronze of 100 MPa
b) CO1 10
What do you understand by refrigeration & also explain construction & working of domestic
a) CO2 10
refrigeration with neat sketch
With neat sketch explain the working principle of four stroke spark ignition engine with P-
b) CO2 10
V diagram.