Professional Documents
Culture Documents
Sheet № 6
1- A refrigeration installation using Freon134a comprises one compressor , one
condenser. And three evaporators of capacities 10 ton, 20 ton and 30 ton respectively.
The temperature to be maintained in the evaporator is 10 ºC , 5 ºC and -10 ºC
respectively each evaporator is fitted with an individual expansion valve. The
condenser pressure is to be maintained at 9.5 bars. The exit condition from the
evaporator is to be dry saturated vapor, and the liquid is sub-cooled by 10 ºC in the
condenser. Determine:
a)The refrigeration effect in each evaporator.
b)Mass flow rate in each evaporator .
c)Compressor power.
d)C.O.P of the system.
4- A refrigeration system using Freon-11, one compressor, one condenser and three
evaporators of capacities 5 ton, 10 ton and 15 ton respectively. The temperature to be
maintained in the evaporator are 5 ºC , -2 ºC and -10 ºC respectively.
The system is individual expansion valves and PRVs. The condenser pressure is to
be maintained at 18 bars. The vapor leaving the evaporator is dry saturated. The liquid
refrigeration is superheated by 5 ºC in the evaporator, assume isentropic compression
. Determine :
a)Mass flow rate in each evaporator .
b)Compressor power.
c) Heat reject in the condenser and heat ad to the super heater.
d)C.O.P of the system.