Professional Documents
Culture Documents
Objective(s)
• To gain the basic knowledge of 2D drawing tools and techniques.
Problem Analysis
2D drafting and drawing is the process of creating and editing technical drawings,
as well as annotating designs. Draw the following designs.
Drawing Tools
Detailed steps of drawing tools are:
Copy :
Shortcut Key: Co
• Go to modify panel
• Press enter
• Put object the other side ( Pressing right click of mouse) and then enter
Mirror :
Shortcut key: Mi
It is use for mirror of any object to specify a first point, second point (XY axis) of
mirror line. Below described the process of mirror tool;
• Press enter
• And click second point in a straight line (Bottom end and lower end of line)
Rotate :
Shortcut key: Ro Rotate command or tools are used to rotate any object around a
base point and on certain angle. Below described the process of rotate tool ;
• Press enter
• Through all above process , your object will be rotating on a certain angle
Eraser :
Shortcut key: Era If you want to remove or delete any object from drawing, Eraser
tool would be a perfect option for you. Below described the process of Eraser
tool;
• Go to modify panel
• Press enter
• Go to modify panel
• Click the right button of mouse and select the object or line
• Now your line or object will have a replace or copy according to certain value.
Move :
Shortcut key: M Move command is used to move any object to the other side in a
specialized distance.