Professional Documents
Culture Documents
Use the Service Procedure provided in this bulletin to verify DTC P1444 and reprogram the
ECM to the New ECM P/N listed in Chart A, above.
SERVICE PROCEDURE
1. Use CONSULT-II to confirm DTC P1444 (EVAP Purge Volume Control S/V) is stored.
1/3
2. Determine the vehicle's Current ECM Part Number. The ECM P/N is found on top of
the CONSULT-II self-diagnosis printout (see Figure 1), or by CONSULT ECM P/N
Selection.
SYSTEM ENGINE
DATE 12/14/2001 03:02:18
P/N 23710-8U240
ECM
Part SELF-DIAG RESULTS
Number
TP010760
Figure 1
3. Compare the vehicle's ECM P/N to those shown under Current ECM P/N in Chart A on
page 1.
A. If the ECM P/N in the vehicle matches the number listed under "Current ECM P/N" in
Chart A, proceed to Step 4 below.
B. If the ECM P/N in the vehicle does not match the number listed under "Current ECM
Data P/N" in Chart A, this bulletin does not apply. Use the appropriate Electronic
Service Manual (ESM) to further diagnose and repair the incident.
4. Perform ECM reprogramming to update the ECM data to the New ECM P/N shown in
Chart A on page 1.
• ASIST users Click here to link to the "ECM Reprogramming For Nissan Vehicles"
general procedure.
• Or refer to Attachment A in the print copy of this bulletin.
Xterra
Frontier
ECM CODE KeyPad
Back Main
Up Menu
More More
TP010761
Figure 2
5. Use CONSULT-II to confirm DTC P1444 is resolved and erase the DTC code.
2/3
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the following claims coding:
DESCRIPTION PFP OP CODE SYM DIA FRT
Reprogram ECM (1) DE98AA HD 32 0.5 Hrs.
Diagnosis - DTC P1444 EK02AA 0.4 Hrs. (B15)
0.5 Hrs. (W/D22)
(1) Reference the final CONSULT-II printout and use the indicated new ECM P/N as the
PFP.
3/3