Professional Documents
Culture Documents
)/999OJA000511//4)
DISTANCE LEARNING PROGRAMME JEE(Advanced)
TEST # 04
(Academic Session : 2022 - 2023) 13-11-2022
JEE(Main + Advanced) : LEADER TEST SERIES / JOINT PACKAGE COURSE (PHASE-II)
12th Undergoing/Pass Students
GENERAL %
1. This sealed booklet is your Question Paper. Do not break the seal till you are told to do so.
2. Use the Optical Response sheet (ORS) provided separately for answering the questions.
3. Blank spaces are provided within this booklet for rough work.
5. After breaking the seal of the booklet, verify that the booklet contains 23 pages and that all the
23 questions in each subject and along with the options are legible. If not, contact the invigilator for
replacement of the booklet.
6. You are allowed to take away the Question Paper at the end of the examination.
7. The ORS will be collected by the invigilator at the end of the examination.
8. Do not tamper with or mutilate the ORS. Do not use the ORS for rough work.
9. Write your name, form number and sign with pen in the space provided for this purpose on the ORS.
Do not write any of these details anywhere else on the ORS. Darken the appropriate bubble
under each digit of your form number.
10. Use a BLACK BALL POINT PEN to darken the bubbles on the ORS.
13. The ORS is machine-gradable. Ensure that the bubbles are darkened in the correct way.
14. Darken the bubbles ONLY IF you are sure of the answer. There is NO WAY to erase or
"un-darken" a darkened bubble.
16. The question paper has three parts : Physics, Chemistry and Mathematics.
PART-1 : PHYSICS
SECTION-I (i) : (Maximum Marks: 18)
This section contains SIX (06) questions.
Each question has FOUR options. ONLY ONE of these four options is the correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
4. Figure shows a square current carrying loop PQRS of side 10 cm and current I = 5A the magnetic
moment M of the loop is :
⃗
0999OJA111522004 LTS-1/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
5. If the B-H curves of two samples of P and Q of iron are as shown below, then which one of the following
statements is correct ?
LTS-2/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (ii) : (Maximum Marks: 16)
This section contains FOUR (04) questions.
Each question has FOUR options for correct answer(s). ONE OR MORE THAN ONE of these four
option(s) is (are) correct option(s).
For each question, choose the correct option(s) to answer the question.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
(A) Conductor B will be in equilibrium if the distance between the conductors is 0.01 m–1.
π
(B) Conductor B performs SHM with period 50
s.
(C) Equilibrium of conductor B is stable.
(D) Equilibrium of conductor B is unstable.
0999OJA111522004 LTS-3/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
9. A particle with charge 'q' is travelling with velocity 'v' parallel to a wire with a uniform linear charge
distribution λ per unit length. The wire also carries a current I as shown in the fig. The velocity with which
particle travels in a straight line parallel to the wire at a distance 'r' away is. [C = Speed of light in medium]
λ λ λC 2 2λ
(A) (B) (C) (D)
μ∈I 2μ ∈ I I μ∈I
10. A single circular loop of wire with radius 0.02 m carries a current of 8.0 A. It is placed at the centre of a
long solenoid that has length 0.65m, radius 0.080 m and 1300 turns. (Axis of circular loop coincide with
axis of solenoid). Let 'i' be the current in solenoid.
(A) If i = 100 mA, the magnetic field at the center of coil can be zero.
(B) If i = 44 mA, the magnetic field at the center of coil can be zero.
(C) If i = 100 mA, the magnetic field at the center of coil can be 8π × 10–5 T.
(D) If i = 100 mA, the magnetic field at the center of coil can be 16π × 10–5 T.
LTS-4/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (iii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
Initially system is at rest. Now a constant horizontal force F = 72N is applied on block B at t = 0 as
shown. Answer the following :
11. Work done by friction on 5kg block in initial two seconds is :
(A) 300 J (B) 250 J (C) –300 J (D) zero
12. Which of following is incorrect (for initial two second) ?
(A) Total work done by friction on system (A + B) is negative
(B) Total work done by friction on system (A + B) is zero
(C) Work done by external force F = 72 N on block A is zero
(D) Work done by friction on block B is negative.
0999OJA111522004 LTS-5/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
13. If current i is passed through the coils the maximum torque in the coil is :-
(A) 2 k (B) πnir2B j (C) πnir 2 B^j (D) πnir 2 Bk
–πnir B^ ^
−
^
14. The angular velocity of the ball when it has rotated through an angle θ is (θ < 180°) is :-
−−−−−−−−−−− −−−−−−−−−−−
10 πniB 5 πniB
(A) √ sin θ (B) √ sin θ
7 m 14 m
−−−−−−−−−−− −−−−−−−−−−
5 πniB 5 πniB
(C) √ cos θ (D) √ sin θ
14 m 7 m
LTS-6/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (iv) : (Maximum Marks: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
List-I List-II
μ 0 I L2
(P) At point O (0, 0, 0) (1)
2πa 3
–
2√2μ 0 I
(Q) At point P1 (a, 0, 0) (here a > > L) (2)
πL
–
μ 0 √5 I L 2
(R) At point P2 (0, a, 0) (here (a > > L) (3)
16π a 3
μ 0 I L2
(S) At point P3 (a, a, 0) (here a > > L) (4)
4π a 3
(A) P → 4;Q → 2;R → 3;S → 1 (B) P → 1;Q → 1;R → 2;S → 3
(C) P → 4;Q → 1;R → 2;S → 3 (D) P → 2;Q → 1;R → 4;S → 3
0999OJA111522004 LTS-7/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
cx
16. A particle of mass 'm' moves under a conservative force with potential energy U(x) = where c & a are
x2 + a2
positive constants. (Assume in each case particle is located at stable equilibrium)
List-I List-II
−
− −−
c
(P) Position of unstable equilibrium is (1) Less than √
ma
For the particle to be confined in −
− −−
c
(Q) the region the velocity of particle at x = –a (2) Just more than √
ma
must be
−
− −−
For particle to reach x = +∞, velocity of 2c
(R) (3) Just more than √
particle at x = –a must be ma
LTS-8/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-III : (Maximum Marks: 24)
This section contains SIX (06) questions.
The answer to each question is a SINGLE DIGIT INTEGER ranging from 0 to 9, both inclusive.
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
9 2
2. The potential energy of a body is given by U = – . The position(in m) at which it’s speed can be
x 2 x
maximum is
3. The coercivity of a small magnet where the ferromagnet gets demagnetized is 3 × 103 A m–1. The current
required (in A) to be passed in a solenoid of length 10 cm and number of turns 100, so that the magnet
gets demagnetized when inside the solenoid, is :
0999OJA111522004 LTS-9/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
4. A solid cylindrical conductor of radius R carries a current along its length. The current density J, however,
is not uniform over the cross section of the conductor but is a function of the radius according to J = br,
μ 0 br 21
where b is a constant, the magnetic field B. at r 1 < R is . then find value of N.
N
Nμ 0 i
5. Magnetic field at the centre of a rectangle of length 'ℓ' and width d, carrying a current i, is given by ,
πd
then find value of N (here ℓ >> d)
6. Figure shows a square loop 10 cm on each side in the x-y plane with its centre at the origin. An infinite
wire is at z = 12 cm above y-axis. What is torque on loop due to magnetic force? If torque is expressed as
12x ×10–6 N-m, fill value of x.
LTS-10/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-IV : (Maximum Marks: 8)
This section contains ONE (01) question.
Question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
perpendicular B and
E ⃗ ≠ B ⃗ , B ≠ 0, E ⃗ ⃗
0999OJA111522004 LTS-11/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
PART-2 : CHEMISTRY
SECTION-I (i) : (Maximum Marks: 18)
This section contains SIX (06) questions.
Each question has FOUR options. ONLY ONE of these four options is the correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
5. Arrange the following in increasing order of deviation from normal tetrahedral angle
(A) P4 < PH3 < H2O (B) PH3 < H3O < P4
(C) P4 < H2O < PH3 (D) H2O < PH3 < P4
6. For, a given reaction A → Product, rate is 1 × 10–4 Ms–1 when [A] = 0.01 M and rate is 1.41 × 10–4 Ms–1
when [A] = 0.02 M. Hence, rate law is :
d[A] d[A]
(A) − = k[A]2 (B) − = k[A]
dt dt
d[A] k d[A]
(C) − = [A] (D) = k[A]1 2
/
dt 4 dt
LTS-12/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (ii) : (Maximum Marks: 16)
This section contains FOUR (04) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
0999OJA111522004 LTS-13/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
SECTION-I (iii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
If this metal is melted then it's density in molten form is 1.2 gm/cc. (NA = 6 × 1023)
11. Density of solid metal in gm/cc is -
(A) 3 (B) 1.6 (C) 1.5 (D) 0.75
12. Percentage of empty space in molten state of metal will be -
(A) 20% (B) 25.6 % (C) 45.6% (D) 40.8%
Paragraph for Questions 13 and 14
According to the concept of resonance, whenever a single Lewis structure cannot describe a molecule
accurately, a number of structures with similar energy, position of nuclei, bonding and non bonding pairs
of electrons are taken as the canonical structures of the hybrid which describes the molecule correctly.
13. Which of the following has maximum bond order in their actual structure
(A) O3 (B) CO2 (C) ClO 4 ⊖
(D) SO 4 2
−
14. In which of the following bond order between any two atoms is more than 2
(A) HN3 (B) CO 3 2
−
(C) C2H4 (D) ClO 3⊖
LTS-14/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (iv) : (Maximum Marks: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
List- I
Assume : edge length of the cube to be 'α'.
(P) a (1) distance between nearest particles in simple cubic crystal
a distance between nearest particles in body centred cubic
(Q) – (2)
√ 2 crystal
– distance between nearest particles in face centred cubic
(R) √ 3 (3)
a
2 crystal
– distance between next nearest particles in simple cubic
(S) √ 2a (4)
crystal
The CORRECT option is
(A) P → 4;Q → 1;R → 2;S → 3 (B) P → 1;Q → 3;R → 4;S → 2
(C) P → 3;Q → 4;R → 1;S → 2 (D) P → 1;Q → 3;R → 2;S → 4
16. List-I (Silicates) List-II (Character)
(P) Be3Al2Si6O18 (1) 2 corner 'O' shared between adjacent unit
(Q) Na2Fe5(OH)2Si8O22 (2) 3 corner 'O' shared between adjacent unit
(R) Mg3(OH)2Si4O10 (3) Si is sp3 hybridised
(S) Sc2Si2O7 (4) Non-planar
(A) P → 1,3,4;Q → 1,2,3,4;R → 2,3,4;S → 3,4 (B) P → 1,4;Q → 1,3,4;R → 1,2,4;S → 1,3,4
(C) P → 1,3,4;Q → 2,3,4;R → 3,4;S → 2,4 (D) P → 1,3;Q → 1,3;R → 3,4;S → 2,3,4
0999OJA111522004 LTS-15/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
SECTION-III : (Maximum Marks: 24)
This section contains SIX (06) questions.
The answer to each question is a SINGLE DIGIT INTEGER ranging from 0 to 9, both inclusive.
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
XeF2, ClF3, H2O, [XeF5]–, I3–, BCl3, XeF4, SF4, PCl5, SF6, IF7
2. The number of (P–O–P) linkages present in P4O12–4
3. Find the number of molecules in which p–p sideways overlapping is present.
(Assume edge length in each case is 100 unit) given –2 = 1.4 and –3 = 1.7
√ √
Fill your answer as sum of digits (excluding decimal places) till you get the single digit answer.
6. The number of atoms in 200 gm of an FCC crystal with density d = 10 gm cm–3 and cell edge as 200 pm
is equal to x × 1025. Find x.
LTS-16/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-IV : (Maximum Marks: 8)
This section contains ONE (01) question.
Question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
0999OJA111522004 LTS-17/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
PART-3 : MATHEMATICS
SECTION-I (i) : (Maximum Marks: 18)
This section contains SIX (06) questions.
Each question has FOUR options. ONLY ONE of these four options is the correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
sec2 x
[Note: 'C' is constant of integration]
ℓn| sin 2x| ℓn| cos 2x|
(A) + C (B) + C
2 2
ℓn(tan x) ℓn| cos x + sin x|
(C) + C (D) + C
2 2
log x − log2 x + x 2
4. ∫ dx is
x3
log x + 2x log x
(A) + C (B) log2x + 2xlogx + C
2x 2
log2 x + 2x 2 log x log x + 2x 2 log x
(C) + C (D) + C
2x 2 2x 2
10 10
dx i 1 m
5. Let ∫ = ∑ a i ℓn(x + i) + C . If ∑ (− )1 ( + )
ai = , then the value
(x + 1)(x + 2). . . . . (x + 10)
i=1 i=1
n
of (m + n) is (where m & n are coprime numbers and C is constant of integration) -
(A) 2097 (B) 2839 (C) 2941 (D) 3055
6. A line with positive rational slope, passes through the point M(6, 0) and is at a distance of 5 from N(1, 3).
The slope of line equals :
15 8 5 8
(A) (B) (C) (D)
8 15 8 5
LTS-18/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (ii) : (Maximum Marks: 16)
This section contains FOUR (04) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
sin 2x dx
10. ∫ is equal to (Where c, c1, c2, c3 is the constant of integration)
( sin x + cos x) 2
1 π 1 π
(A) x+ cot(x + ) + c1 (B) x+ tan( − x) + c2
2 4 2 4
tan 2x sec 2x 1
(C) x− + + c3 (D) x+ +c
2 2 1 + tan x
0999OJA111522004 LTS-19/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
SECTION-I (iii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
g(x) h(x)
On the basis of above information, answer the following questions :
13. ∫ f (x) . g(x) . h(x) dx is equal to -
x5 x6 x7 x8
(A) + C (B) + C (C) + C (D) + C
5 6 7 8
14. ƒ(x), g(x), h(x) are in -
LTS-20/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-I (iv) : (Maximum Marks: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
k
Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II
(P) (a + b) is equal to (1) 0
(Q) (c – d) is equal to (2) 1
3m
(R) is equal to (3) 2
5
(S) k is equal to (4) 4
(A) P → 4;Q → 1;R → 3;S → 2 (B) P → 3;Q → 1;R → 4;S → 2
(C) P → 2;Q → 3;R → 4;S → 1 (D) P → 3;Q → 1;R → 2;S → 4
−−− −−−−−− −−−−−
2+ 1 4−x n
x 1 ℓ ∣√ − ∣
1 1 ℓ
16. Let ∫ √ dx = log∣ ∣+ sin −
x 2) + C ,
( (where ℓ , m,k ∈ N& is in
2( − 2)
x 1 x m −−
∣√ −
−−
1
−
4+x n ∣ k m
lowest terms, C is the constant of integration).
Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II
(P) ℓ= (1) 3
(Q) m= (2) 2
(R) k= (3) 1
(S) n+2= (4) 4
(A) P → 3;Q → 4;R → 2;S → 1 (B) P → 2;Q → 3;R → 1;S → 4
(C) P → 3;Q → 4;R → 1;S → 2 (D) P → 3;Q → 1;R → 2;S → 4
0999OJA111522004 LTS-21/23
ALLEN Target : JEE (Main + Advanced) 2023/13-11-2022
SECTION-III : (Maximum Marks: 24)
This section contains SIX (06) questions.
The answer to each question is a SINGLE DIGIT INTEGER ranging from 0 to 9, both inclusive.
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
√ − 1 2 9x α
where C is constant of integration, then ( α + 3β) is equal to
−−−−−−
1
√ +√
3−
−
x
2. Let ∫
3−−
dx = k(1 + √
3−
x−)m + C , then (k + 2m) is equal to (where 'C' is constant of integration)
√ 2 x
3. Number of integral values of k for which the lines x + ky = 4 and 2x – 3y = 6 intersect in the third quadrant,
is :
sin 2 xcos2 x − 1
4. If ∫ dx = + c then α + β is equal to
(sin 5 x + cos3 xsin 2 x + sin 3 xcos2 x + cos5 x)
2 α (1 + tan βx)
5. Let m and m2 are slopes of lines represented by the line pair qx2 – 2pxy + y2 – 2x + 3y + λ = 0, then value
q + q2 + 6pq
of is
p3
6. If a point (α, 2) lies between the lines x – y – 1 = 0 and 2x – 2y – 5 = 0 then number of integral values of α
is
LTS-22/23 0999OJA111522004
ALLEN Leader Test Series/Joint Package Course/Phase-II/13-11-2022
SECTION-IV : (Maximum Marks: 8)
This section contains ONE (01) question.
Question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
0999OJA111522004 LTS-23/23