Professional Documents
Culture Documents
121
Longitudinal joint
Specification Pipe class factor (E)
t
P = 2S (DF)
(D − t)
2S
P= (DF)
(SDR − 1)
mining a design pressure rating at the speci- responding to a value from a common num-
fied temperature by arithmetic interpolation bering system that was derived from the
using the procedure in Part D.2 of PPI TR–3/ American National Standards Institute pre-
2008, HDB/PDB/SDB/MRS Policies (incor- ferred number series 10.
417
ER30NO09.008</MATH>
VerDate Mar<15>2010 14:56 Jan 03, 2012 Jkt 223216 PO 00000 Frm 00429 Fmt 8010 Sfmt 8003 Y:\SGML\223216.XXX 223216