When Monitored: After current feedback monitoring is complete. Average engine speed is above 700 RPM. Set Condition: The ECM does not receive a signal from the solenoid valve indicating valve movement.
POSSIBLE CAUSES FUEL INJECTION PUMP
TEST ACTION APPLICABILITY
1 Turn the ignition on. All With the DRBIIIt, erase ECM DTC’s. Test Drive the vehicle. With the DRBIIIt, read ECM DTC’s. Is DTC P0252 present? Yes → Replace the Fuel Injection Pump in accordance with the Service Information. Perform POWERTRAIN VERIFICATION TEST VER - 5. No → Test Complete.