Professional Documents
Culture Documents
DSI ALWAG-Systems DYWIDAG Cable Bolts For Mining
DSI ALWAG-Systems DYWIDAG Cable Bolts For Mining
2
Contents
Introduction .................................................................................................................. 3
Specifications ............................................................................................................... 5
Accessories .................................................................................................................. 6
Introduction
DYWIDAG Cable Bolts for Mining are
used for temporary and semi-permanent
rock reinforcement in underground
Mining. Rock bolting with prestressing
steel cable bolts combines low bolt
weight with high load-bearing capacity.
The system remains flexible even with
larger cable bolt lengths.
3
Fields of Application Main Advantages
■■ Ground control for different fields of ■■ Long cable bolts are easily displaceable in limited space
application - from coal mining to hard ■■ High load-bearing capacity at a low weight per meter
rock mining
■■ Flexible bolt lengths
■■ Bolting in limited space conditions
■■ Installation using cement cartridges, resin cartridges, cement grout or injection resin
■■ Reinforcement of roadways and
gateways
■■ Bolting in the hanging wall of longwall
T-junctions
System Description
■■ DYWIDAG Cable Bolts for Mining are available in three different versions
4
System Components
■■ End holding devices
■ Single strand fish hook
■■ Plate
■ Different designs and dimensions available on request
■■ Press sleeve
■ Anchorage for DYWIDAG Strand Thread Anchors
■ Yielding element for large ground deformation or areas
prone to rockbursts
■ Thread M30 or DYWI® Drill left-handed R32 or R38 thread
Specifications
Characteristics/Type Unit CB15.3 CB15.7 LG18.3
Nominal diameter [mm] 15.2 15.7 18.3
Nominal diameter [inch] 0.60 0.62 0.70
Cross-section [mm2] 140 150 200
Weight [kg/m] 1.09 1.17 1.56
Yield strength Rp,0.1 [N/mm2] 1,560 1,640 1,570
Tensile strength [N/mm2] 1,770 1,860 1,770
Yield load Fp,0.1 [kN] 220 251 312
Ultimate load [kN] 248 279 354
5
Installation Procedure
■■ Borehole drilling
■■ The choice of the borehole diameter
depends on the drilling machinery,
the cable bolt length, and the bond
medium
■■ Version A: Filling of the borehole
with cement grout or synthetic resin
cartridges, then insertion of the cable
bolt
■■ Version B: Insertion of the cable bolt
with factory-installed injection hose,
subsequent injection with cement grout
or injection resin
■■ Anchorage of the anchor head:
Plate and wedge or press sleeve
■■ Prestressing of anchor and wedge
sleeve using a cable bolt tensioner
Accessories
■■ Cable bolt tensioning jack
■■ Cable bolt expansion shell
■■ Dog bone coupling for slings or trusses
■■ Galvanized system components
available on request
■■ Packers and borehole seals available
on request
6
7
DSI Austria Austria
DYWIDAG-Systems International GmbH
Alfred-Wagner-Strasse 1 Argentina
4061 Pasching/Linz, Austria Australia
Phone +43-7229-610 49 0
Fax +43-7229-610 49 80 belgium
E-mail alwag@dywidag-systems.at
Bosnia and herzegovina
www.alwag.com
Brazil
Canada
Chile
Colombia
C o s t a R i ca
C r o at i a
Czech republic
Denmark
Egypt
estonia
Finland
France
Germany
Greece
GU A TEM A L A
HONDUR A S
Hong Kong
Indonesia
I ta ly
J a pa n
Korea
Lebanon
Luxembourg
Ma l a y s i a
Mexico
Netherlands
N o r way
Oman
Pa n a m a
Pa r a g u a y
Peru
POL A ND
Portugal
Q ata r
Sa u d i A r a b i a
singapore
S o u t h A f r i ca
S pa i n
Sweden
Switzerland
Ta i w a n
Thailand
Turkey
U n i t e d A r a b E m i r at e s
Please note:
This brochure serves basic information "ALWAG" (AM 952/79), "AT" (AM 6138/2003), United kingdom
purposes only. Technical data and "AT-SYSTEM” (AM 6139/2003),
U r u g u ay
04345-1/12.12-web he