Sl. No. Details Grid A-B B-C C-D 1 Effective span mm l 3450 3400 3450 2 Width of beam mm b 300 300 300 3 Depth of beam mm D 400 400 400 4 Effective Depth mm d 360 360 360 5 Mu, limit kN.m Mu, lim. 161 161 161 6 pt, limit % pt, lim 1.13 1.13 1.13 7 Factored Moment kN.m Mu Left 8.65 32.70 39.00 Mid 28.60 13.10 28.60 Right 39.00 32.70 8.65 8 Factored Shear kN Vu Left 5.00 6.00 5.00 Mid 3.00 0.00 3.00 Right 5.00 6.00 5.00 9 Equivalent Shear stress M Pa tve 0.03 0.00 0.03 10 Maximum Shear stress M Pa tc, max 3.46 3.46 3.46 11 CHECK for Max Shear stress -- -- OK OK OK 12 Type of section -- -- Left singly reinf singly reinf singly reinf Mid singly reinf singly reinf singly reinf Right singly reinf singly reinf singly reinf IF doubly reinforced, 13 Ratio -- d' / d --- --- --- 14 Stress in compression steel M Pa fsc Left --- --- --- 15 Comp stress in concrete at Asc level M Pa fcc Left --- --- --- 16 Area of Tension steel required mm2 Ast1 Left --- --- --- 17 Area of additional steel requied mm2 Ast2 Left -- -- -- 18 Area of Tension steel required mm 2 Ast Left -- -- -- 19 Area of Compression steel required mm 2 Asc Left 0 0 0 Mid 0 0 0 IF singly reinforced, 20 Min area of steel as per IS: 456-2000 mm2 Ast, min 184 184 184 21 Min area of steel as per IS: 13920-1993 mm2 Ast, min 284 284 284 22 Area of Tension steel required mm2 Ast Left 56 216 260 Mid 188 85 188 Right 260 216 56 23 Area of steel provided ( at top ) Nos.- mm Left Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 1- # 12 1- # 12 1- # 12 mm2 339 339 339 Unit Symbol RB5 RB5 RB5 Sl. No. Details Grid A-B B-C C-D 23 Area of steel provided ( at top ) Nos.- mm Mid Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 0- # 12 0- #0 0- #0 mm 2 226 226 226 Nos.- mm Right Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 1- # 12 1- # 12 1- # 12 mm2 339 339 339 24 Area of steel provided ( at bottom ) Nos.- mm Left Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 1- # 12 0- #0 1- # 12 mm 2 339 226 339 Nos.- mm Mid Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 1- # 12 0- #0 1- # 12 mm2 339 226 339 Nos.- mm Right Ast Top row 2- # 12 2- # 12 2- # 12 Nos.- mm Middle1 1- # 12 0- #0 1- # 12 mm 2 339 226 339 CHECK FOR SHEAR : 25 Factor -- b Left 11.09 11.09 11.09 Mid 11.09 16.63 11.09 Right 11.09 11.09 11.09 26 Design Shear strength of concrete M Pa tc Left 0.41 0.41 0.41 Mid 0.41 0.34 0.41 Right 0.41 0.41 0.41 27 Dia of Shear stirrups mm f 8 8 8 28 Number of legs Nos. -- 2 2 2 29 Spacing of stirrups as per Cl. 40.4 of mm sv1 Support -403 -414 -403 IS:456 mid -384 -- -384 Spacing of stirrups as per Cl. 26.5.1.5 of 30 mm sv3 270 270 270 IS:456 Spacing of stirrups as per Cl. 26.5.1.6 of 31 mm sv5 364 364 364 IS:456 32 Spacing of stirrups as per IS:13920 mm Support 90 90 90 mid 180 180 180 33 Spacing of stirrups required mm sv Support 90 90 90 mid 180 180 180 34 Spacing of stirrups provided mm sv Support 100 100 100 mid 180 180 180 CHECK FOR DEFLECTION : 35 Effective span mm L 3450 3400 3450 36 Actual L/d ratio -- -- 9.583 9.444 9.583 37 Basic value of L/d -- -- 26.00 26.00 26.00 38 fs M Pa -- 160.85 108.73 160.85 39 Modification factor for tension steel -- -- 2.00 2.00 2.00 40 % of compression steel % -- 0.31 0.21 0.31 41 Modification factor for compression steel -- -- 1.00 1.00 1.00 42 Modified L/d -- -- 52.00 52.00 52.00 43 CHECK for deflection -- -- OK OK OK STUP Consultants P.Ltd.
DESIGN OF ONEWAY SLABS
Data : Grade of Concrete = M 30 Grade of Steel = Fe 500 Clear cover to Reinforcement = 30.00 mm Effective Cover – bottom40.00 mm Limiting depth of NA= Xu, max / d= 0.456
Designed by Limit state method of design as per IS: 456-2000
References : 2. IS SP : 24 Explanatory Handbook on IS: 456