Programmable Logical Controller (PLC) Ladder Logic Instructions for Programming • PLC Introduction. (S7-200,S7-300,Allen Bradley) • Normally open • History of PLC • Normally close 1. • Specification of early PLCs • Normally open immediate • How many Types of PLC • Normally close immediate • Introduction to Relay logic • Set Bit • Programming in Relay Logic • Reset Bit • Compare PLC Components • Not • Power Supply • Positive Transition • CPU • Negative Transition 2. • Set-Reset Bit • Input/outputs • Memory • Practice of Each One Integer Math PLC Hardware • Add integer • PLC hardware configurations • Decrement word • Input and output Types 8. • Increment word 3. Interrupt • Electrical wiring for input and outputs • Relays • Enable interrupt • Contactors • Disable Interrupt • Attach interrupt • Detach interrupt PLC memory types • Return Interrupt • RAM Move 4. • ROM • Move word • EPROME • Move Byte • Move double word Timers and Counters • Introduction to Timer • On delay timer PLC Modules • Retentive on delay timer • Discreet Input Modules • Off delay timer 5. • Discreet Output modules • Practice of Each Timer Instruction • Analog input Modules Introduction to Counters • Count up • Analog Output Modules • Count down • Count up/down • Use in Ladder Logic of Each instruction Analog Module PLC Scan cycle: • Difference Between Analog and Digital inputs and • Self-Test Outputs • How to attach analog Modules • Input scan 6. • How to program and control analog devices • Logic solve Practical of Analog: • Output scan 9. • How to control a Speed of a Motor • Control a Speed of a Motor through digital input • Control a Speed of a Motor through analog input • Control the speed of motor through timed Interrupts • Furnace Temperature Control Through a PLC Programming Language • Scaling of Furnace temperature through PLC • Introduction to Ladder logic • Ladder logic history • Introduction to Step7/Microwin Human Machine Interface (HMI) • Introduction to Siemens S7-200 PLC • Introduction to HMI 7. • Introduction to RS-Logix for Allen Bradley • Use of HMI in industry • Programming Concepts and features 10. • Introduction toTD-200 HMI • Basics of ladder programming • Working and Implementation of TD-200 • Allen Bradley (Timer, Counter, Interrupt) • How to Program a TD-200 HMI • How to display Messages at TD_200 • How to show Embedded Data to HMI
Ph.: 051-4864925-26 | Web: www.sina.com.pk | www.sina.edu.pk | Email: info@sina.edu.pk | Facebook/sina.edu.pk Sina Institute of Networks & Aesthetics
Supervisory Control and Data Acquisition ( SCADA ) Software
Introduction • Introduction to SCADA Step7/Microwin • History of SCADA S7-200 Simulator 1. • Elements of SCADA PC-Simu • Fundamentals of SCADA systems TIA V13 (Totally Integrated Automation) • Use of Industrial Ethernet in SCADA systems WinCC • OPC and SCADA systems Wintr • Difference between SCADA and DCS MODBUS Industrial Communication Protocols VSPE ( Virtual Serial Port Emulator) • Introduction to Serial Communication OPC (KEPSERVER) • RS-232 interface standard WINPLC ENGINE • RS-485 interface standard Factory I/O 2. • Fieldbus ITS PLC • Modbus Industrial Controllers • DNP3.0 • TCP/IP • SNMP SIEMENS S7-200| S7-300|S7-1200 MITSUBUSHI PLC HMI (Human Machine Interface) & project with Software’s FATEK PLC Projects Using WinCC Flexible 2008 HMI (Human Machine Interface) • Introduction to HMI software Wincc flexible 2007 Tags Industrial Simulators Graphical Displays Communication DC Motors 3. • Handling of digital inputs and outputs using Wincc flexible 2007 Industrial Electric Furnace • Data Logging and event handling using Wincc Lift / Elevator • Developing communication between MODBUS and Wincc Flexible 2007 Twin Rooter • Developing communication between OPC server and Wincc Flexible 2007 Inverted Pendulum • Developing communication between Siemens S7-200 PLC and Wincc Flexible 2007 Practical • Controlling DC motor using Wincc flexible 2007 • Designing of temperature controller Wincc flexible 2007 Bit logic • Allen Bradley Communication with HMI Latch Circuit Projects with WinTr SCADA Software Proximity Sensor • Introduction to SCADA software WinTr over MODBUS Move Instruction Tags Timer Graphical Displays Traffic Signal Control Communication Bottle Filling Application on S7-200 4. • Screen designing, Alarm handling and Graph windows Simulator and PC-Simu • Handling of digital inputs and outputs using WinTr Counter • Data Logging and event handling using WinTr Hardware Interrupt • Developing communication between MODBUS and WinTr Software Interrupt High Speed Counter • Developing communication between Siemens S7-200 and WinTr Encoder Working • Project With WinTr and Remotely Access to S7-200 Motor RPM Measurement using • Interfacing of Allen Bradley with WINTR. encoder ALARM Management Analog Control • What is an alarm?? Control DC motor with analog • How many Types of Alarms PT-100 interfacing with S7-200 5. • How to check and show alarms on your screen?? Firing angle control circuit Design and • Good Alarms & Bad alarms Implementation • Warnings S71200, bit logic, timer, counter, analog • Alarms handling through Win CC and WinTr SCADA softwares interfacing Bar Graphs and History HMI-KTP 700 Programming & • How to maintained the history Interfacing with S71200 • What is Bar graph?? S7-300 Introduction 6. Box sorting project implementation • How to show charts and graphs in Screen? • How to save and convert the alarms and Bar graphs to excel format? with s7300 • Bar graphs and history through SCADA software Interfacing s7300 with winplc-engine