Professional Documents
Culture Documents
BLUE GAS
SUPPLY AND INSTALLATION
“GEARING TOWARDS EXCELLENCE”
SOUTH LUZON OFFICE : BLOCK 2 WILLIAMSBURG COR COLUMBUS
STREET MAHNATTAN VILLAGE, SAN FRANCISCO, SAN PABLO
CITY, LAGUNA, REGION 4-A (CALABARZON)
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
1
BLUE GAS
SUPPLY AND INSTALLATION
OUR HISTORY
Blue Gas Supply and Installation, was founded on April 11, 2018 by Engr. John Paulo
Matabang. As a Licensed Mechanical Engineer, his 2 year-experience in Liquefied Petroleum
Gas as a Technical Services Engineer catering Industrial and Commercial accounts including big
food chain companies in the Philippines has lead him to start his own Supply and Installation
Company as he saw its potential in the market. He also has an experience in one of the
prominent LPG Supplier Storage plant in Batangas City, Philippines as a Plant Operations
Engineer. He is also a trained and licensed LPG Technician conducted by the Philippine Liquefied
Petroleum Gas Association, Inc. Graduating Top 3 in his class during the training, the results
were submitted to Department of Energy for recognition.
Currently, the company distributes LPG Supply and accessories in some of the parts of
Southern Luzon covering Laguna, Batangas, and Quezon Provinces. It also has a design and
installation arm covering National Capital Region and CALABARZON areas.
MISSION
“To Serve the Filipino community with safe, quality and effective LPG supply and installation”
VISION
“To be the number one LPG supplier and installer in Southern Luzon and National Capital Region
with competent engineers who are dedicated in the safety, and efficiency of work”
CORE VALUES
Health, Safety, and Security – We in Blue Gas always prioritize the safety and welfare of our
employees as well as our customers. When we say Safety, we mean business.
Quality and Excellence – We are always committed in ensuring that our workmanship in every
project that we do to satisfy the needs of our customers.
We always gear ourselves towards excellence.
Efficiency – We at Blue Gas always practice the correct design and proper installation that will
always tailored fit to clients’ requirements which is based on both international and local
standards.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
2
BLUE GAS
SUPPLY AND INSTALLATION
HEALTH SAFETY SECURITY & ENVIRONMENT POLICY
As part of our core values, we value Health, Safety, and Security for each of our
employees as well as our customers. We also work in according to the conservation of the
Environment.
It is part of our policy that all our employees on all levels are involved in Health, Safety,
Security and Environment Assessments in all of our activities and projects
Through a well cascaded Health and Safety Programs, we believe that all risks are well
assessed and managed if not totally eliminated to prevent our employees in having accidents
resulting to fatality.
We will make extra measures in securing all assets within our workplace will be secured.
These will also include our stakeholders and company image.
It is important to give our employees proper trainings and education to give them higher
level of competencies in Health, Safety, Security and Environment especially when exposed on
the field.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
3
BLUE GAS
SUPPLY AND INSTALLATION
SAFETY MANUAL
I. OBJECTIVES
As part of our core values, we highly prioritize Health, Safety, and Security of our employees
as well as our assets to prevent any accidents that can lead to fatality.
It is a general policy of BLUE GAS SUPPLY AND INSTALLATION to secure the safety of every
employee doing the job without harming the environment. Safety will be our top responsibility
in every aspect that we are working on from the design stage up to the finish product and
services.
This manual will be accessible to all of our employees on all levels to increase their level of
awareness that the main goal of our company is to have a Safe Working Environment with Zero
Accident.
During mobilization, BLUE GAS SUPPLY AND INSTALLATION shall coordinate with the Site
Owner to request for a Site Induction for the safety of our personnel inside the work area.
1. Safety Requirement
Perform company standard safety provision, including but not limited to the following:
1.1. Deploy an accredited Safety Officer at all times.
1.2. Coordinate with site Owners and undergo Site Safety Induction to become aware of any
hazard inside and outside the workplace
1.3. Conduct Toolbox Meetings/Orientation daily to discuss about safety and risk hazards
within the workplace (!5 mins max)
1.4. Workers must Fill-up the Job Hazard Analysis before doing the job in order to further
assess the workplace in accordance to the scope of works
1.5. Provide all workforce with appropriate Personal Protective Equipment which include 100%
Pure cotton uniform, long pants, hard hat, safety shoes, eye glasses, and cotton gloves.
These PPEs will all be visible if required by the client. Proper PPEs will also be worn by
Supervisor and or Safety Officer.
1.6. All workforce must perform daily housekeeping and maintain the work area clean and
safe to walk through
1.7. Provide appropriate safety signage which are required by the Owner to prevent any
accident inside the workplace.
2. BLUE GAS SUPPLY AND INSTALLATION shall take full responsibility for all activities in
the work site, until work is fully completed and turn over process is done with the Owners.
Duties and responsibilities include the following:
2.1. Attend all coordination meetings together with other contractors and the owner/s by our
company representative/s
2.2. Follow company or owner designs, specifications, and standards for which has
been agreed upon during coordination meetings. BLUE GAS SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
4
BLUE GAS
SUPPLY AND INSTALLATION
must verify the scope with the updated and appropriate plan drawings to execute the
work accordingly. Should there be any changes, it must be inquired from the owner by
our company representative/s.
2.3. Submit progress reports depending on the requirement of the client and daily time
records to be posted by company representative
2.4. Secure all materials intended for project use at all times (during working hours and
non-working hours)
2.5. Conduct assessment of the work area upon project completion. Submit turnover
certificate, completion certificate and other appropriate documents to Owners. The
contractor must also request for the acceptance of project from the Company
Representative.
3. Upon completion of the scope, the contractors remove all temporary facilities, if there
are any installed or built in the area. All used and unused materials must be removed
accordingly. The contractor must demobilize from the area and leave it with a clean
environment.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
5
BLUE GAS
SUPPLY AND INSTALLATION
1. Eye Protection – provide appropriate protection against all hazards such as flying objects
or debris, hazardous or irritant chemicals that can possibly hit the eyes. Eye Protection
must be comfortable to use and cannot be a distraction workers’ eyesight. It must be
durable and can be easily cleaned to maintain its good condition.
2. Head Protection – Hard hats for the protection from impact penetration from falling
debris, flying objects, blows, and from limited electric shocks and burns. It must be made
of non-combustible or slow burning materials. Total weight of complete hard hat must
not be more than .45 kgs. (16 ounces).
3. Hand and Arm Protection – Gloves shall be used for workers handling sharp edged
equipment/tools and objects, hot metals and electrical equipment. Glove materials for
each scope of work must be selected accordingly. Gloves must not restrain movement
of the hands and fingers. Damaged and torn gloves must be immediately changed to
prevent hand injury.
4. Safety belts and Harness – Workforce working at a height of 6 meters (20 feet) or more
above water or ground, temporary or permanent platform, scaffold construction or where
otherwise exposed to the possibility of falls hazardous to life or limb, shall be secured
by safety belts and life lines.
5. Safety Shoes – Workers shall always wear approved safety shoes and leg protection
for whenever necessary as determined by the nature of work.
6. Ear Plugs and Ear Muffs – Wear these PPE in designated areas where the noise level
exceeds to 85 Decibels.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
6
BLUE GAS
SUPPLY AND INSTALLATION
1. General Guidelines:
1.1. Welding on enclosed containers filled with explosives and flammable substances is
prohibited. Container/s must be first thoroughly cleaned and found completely free
of combustible gases or vapors.
1.2. Welding area which is passed by workers or people other than the welders shalle be
enclosed by means of suitable screens at least 2 m. (6.5 ft) high and preferably
painted with light flat paint. Screens must be opaque and made of non-combustible
materials.
1.3. A portable fire extinguisher must be in place during welding and cutting activities.
1.4. Secure authorization from a Safety Officer before engagement to welding and cutting
activities. He shall issue a work permit indicating all the risks and hazards involved
during the activity. All risks and hazards must be at least mitigated if not totally
eliminated.
1.5. All workers who will be involved in welding and cutting activities must wear
appropriate Personal Protective Equipment such as goggles, helmet or head shields,
hand shields and suitable aprons.
1. General Guidelines:
1.1. When working at heights, always secure that scaffolding is 100% in good condition
of the correct materials and strength for the purpose of work being done.
1.2. All materials and parts not in use of intended for re-use in scaffolding works must be
kept in good condition and be separated for other materials unsuitable for scaffolding.
1.3. Always secure hand tools from falling below the ground to avoid having accident.
1.4. For heights over 20 meters, scaffolding must be designed by structural engineer and
be approved by appropriate authority. Structural steel when used as load bearing
members of scaffolding shall be destressed at welded or bent joints.
1.5. Scaffold shall be supervised by the person in charge for construction during erection,
and dismantling.
1.6. All workers working at heights must be familiar on how to use Safety Harness and
Lifeline.
1.7. Do not use scaffolding without having inspected by an authorized scaffold inspector
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
7
BLUE GAS
SUPPLY AND INSTALLATION
4. GOOD HOUSEKEEPING PRACTICE
As per Occupational Safety and Health Standards, Rule 1060 “Premises of Establishment”,
good housekeeping must be maintained at all times through cleanliness of building, yards,
machines, equipment, regular waste disposal, and orderly arrangement of processes,
operations, storage and filling of materials.
1. General Guidelines:
1.1. Always keep all materials in order and in place before, during, and after work
execution.
1.2. Do not leave any tools where they can be a threat for the safety of workers and
passer’s by. Put them in proper container if not in use.
1.3. Keep job site clean at all times.
1.4. Segregate all disposable materials and identify if it is non-combustible or
combustible materials.
5. SAFETY SIGNAGES
Based on Department Order No. 13 Series 1998, “Guidelines Governing Occupational Safety
and Health in Construction Industry” under Section 9 “Construction Safety Signages”,
Construction Safety Signages must be in place to warn the workers and the public of the threats
and hazards existing in the workplace.
1. General Guidelines:
1.1. BLUE GAS SUPPLY AND INSTALLATION must provide all the necessary safety
signages required in a work site prior to entry in project site.
1.2. Sinages must be in place in the following areas:
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
8
BLUE GAS
SUPPLY AND INSTALLATION
1.2. Fire alarm must be activated if fire cannot be eliminated by a portable fire
extinguisher. Activation must be done by the nearest guard or authorized personnel
on duty.
1.3. Stop all activities and go to assembly area unless it is already “Fire Out”
1.4. Coordinate with site supervisor at all times for the status.
2.1. EARTHQUAKE
2.1.1. Remain calm to protect self and others.
2.1.2. Look for a safe area until the shaking stops.
2.1.3. Practice DROP, COVER, AND HOLD ON
2.1.3.1. DROP – drop down on the floor
2.1.3.2. COVER – take cover under a sturdy material. Protect your head and
neck.
2.1.3.3. HOLD ON – Hold on to your protection and be prepared to move on
it.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
9
BLUE GAS
SUPPLY AND INSTALLATION
LIQUEFIED PETROLEUM GAS PIPING INSTALLATION
I. GENERAL PROVISION
a. All LPG Piping installers must be trained and certified as LPG Technicians. Training
is being conducted by Philippine LPG Association (PLPGA) and LPG Industry
Association.
b. Piping installation must be within standards referring to NFPA 58 and NFPA 54.
c. Piping installation must meet the capacity or consumption of the end-user’s
connected appliances/equipment
d. Piping system must be installed with suitable shut-off valves for each
appliance/equipment.
e. Unused pipe ends must be capped or plugged
f. Piping System must be properly supported with brackets or hangers. (use proper
pipe span below)
C. FITTINGS
a. Recommended: Welded Fittings (Butt Weld)
b. Threaded Fittings: for 50mm Dia or less
c. Materials: Forged Carbon Steel
i. Male and Female Threads should be tapered and of the same form
d. Schedule 80 must be used for threading
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
10
BLUE GAS
SUPPLY AND INSTALLATION
D. GASKETS
E. VALVES
a. Threaded Type : Use 600 – 800 W.O.G stainless/carbon steel
b. Use Single Body Type Valve
c. Recommended Brand : KITZ – Japan Made, Jamesbury, Worcester – UK Brand,
MT-Valve, Miyairi – Japanese Brand, Schmidt – Germa
BRAND ORIGIN
KITZ JAPAN
MIYAIRI JAPAN
JAMESBURY UK
WORCESTER UK
SHMIDT GERMANY
G. THREAD SEALANTS
a. Rector Seal
b. Teflon Tape is acceptable
H. CORROSION PROTECTION
a. For Above Ground: Apply 2 Coats Epoxy Primer & 2 Coats Lemon Yellow For Vapor
Line
b. For Under Ground: Apply 2 Coats Primer oxide & wrap with Denso Tape.
i. Clean Pipe properly by using steel brush and cloth before applying primer
coating
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
11
BLUE GAS
SUPPLY AND INSTALLATION
LIQUEFIED PETROLEUM GAS PIPING COMMISSIONING
I. GENERAL PROVISION
a. Commissioning of LPG pipeline Is testing for leaks with all its fittings clearing it
with air before introducing LPG for consumer operations.
b. Acceptable Methods for Commissioning:
i. Replace air by an inert gas (N2 or CO2) before introducing LPG (Vapor or
Liquid)
ii. Replace air by LPG Vapor at a minimum level before introducing a required
safe level of LPG.
c. The commissioning team must first evaluate each Methods and consider safety
and environmental concerns before doing this activity.
II. DISPLACING AIR WITH INERT GAS ((N2 or CO2) FOLLOWD BY LPG VAPOR
a. Secure necessary permits from the authorizing body for the site to be
commissioned to ensure that the activity is permitted and of the correct
standards.
b. Ensure that all appurtenances (e.g. pressure gauges, level gauges) have been
tested or certified before doing the commissioning activity.
c. Confirm the vessel or system to be supplied by inert gas for testing.
d. Connect the source of inert gas to suitable vessel connection to be tested.
e. Ensure that the line is connected with pressure gauge and adjustable pressure
control valve to monitor pressure during testing.
f. The vessel or system must be purged of air and other contaminants leaving it full
of just inert gas.
g. For Storage Tanks, ensure that liquid inlet/outlet, bleed valves, vent pipes are
closed. Pressure Relief Valves(PRV) must also be tested before fitting it to the
shell.
h. Raise pressure in the inert gas inlet line to just above atmospheric pressure.
i. Maintaining a positive pressure in the inert gas line, slowly open drain valve
followed by the top vapor line valve. Purge air from the vessel at a velocity not
exceeding 1 m/sec(3-ft/sec). Displace air slowly with inert gas until vessel of
pipeline is free of air.
j. Close vapor outlet valve and check if there is remaining positive pressure on the
inlet and close inert gas inlet valves.
k. Vent inert gas and LPG vapor to a recommended safe area.
l. Connect source of LPG vapor to drain valve connection and introduce LPG vapor
into vessel slowly and steadily, maintaining a positive pressure of .34 to 1 bar (5-
15 psig) while inert gas is bled-off from the top connection.
m. Close the inert gas vent valve when the vessel is completely replaced with LPG
Vapor. Continue to introduce LPG vapor to pressurize the vessel. Small amount of
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
12
BLUE GAS
SUPPLY AND INSTALLATION
LPG can be slowly introduced into the vessel allowing it to vaporize. (Liquid LPG
should not reach MDPE pipes)
i. For Pipeline-commissioning, pressure must stop at 15 psig.
n. Upon reaching the vapor pressure of the LPG source in the vessel, LPG liquid may
be pumped until maximum liquid level is obtained. (For Vessel).
o. Check that all fittings and appurtenances are free of leak during filling. Fill the
vessel until safe liquid level is obtained.
p. Close all vessels and control valves leaving it out of service until advice from the
site owner is acquired.
q. After commissioning, issue a detailed report of the Methodology, Equipment and
Materials used, and date for documentation purposes.
a. Secure necessary permits from the authorizing body for the site to be
commissioned to ensure that the activity is permitted and of the correct
standards.
b. Ensure that all appurtenances (e.g. pressure gauges, level gauges) have been
tested or certified before doing the commissioning activity.
c. Ensure that all appurtenances (e.g. pressure gauges, level gauges) have been
tested or certified and fitted properly before doing the commissioning activity.
d. Assess the area to ensure that it is safe to proceed with the commissioning
e. Connect source of LPG vapor to drain valve connection of vessel or pipeline.
Ensure that all lines are included with adjustable pressure controller and purged of
air or other contaminants.
f. Introduce LPG vapor into vessel slowly and steadily, raise a positive pressure of
.34 to 1 bar (5-15 psig) while air is being bled off on the vent valve on top. Purge
air from the vessel at a velocity not exceeding 1 m/sec(3-ft/sec), but maintain
positive pressure on the LPG Vapor Inlet.
g. Strictly monitor bleeding of Air/LPG mixture through a burner which must be
located in safe area. Include flame trap in the line to the burner. Continuously
displace air with LPG Vapor until the vessel is air free. Check the area regularly to
maintain the safety of this operation. Instruct every personnel not to inhale vapor.
h. LPG and air mixture is inevitable in this process. The possibility that the one being
vented is LPG vapor rather than air. If time is not an issue, stop the whole operation
to let LPG vapor to rest at the lower portion of the vessel this would allow Air to
bleed off at the top most vent valve.
i. When air is completely bled off, continuously pressurize the vessel with LPG vapor
to allow liquid LPG to be introduced. For MDPE pipeline, vapor pressure should be
maintained at 15 psig and no liquid shall be permitted.
j. Fill the vessel by using pump until it reached the maximum safe liquid-level. Stop
the pump and close all valves after filling.
k. Ensure that air/LPG vapor mixture have been removed from the vessel.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
13
BLUE GAS
SUPPLY AND INSTALLATION
l. After commissioning, issue a detailed report of the Methodology, Equipment and
Materials used, and date for documentation purposes.
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
14
BLUE GAS
SUPPLY AND INSTALLATION
SERVICES OFFERED:
COMPLETED PROJECTS:
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
15
BLUE GAS
SUPPLY AND INSTALLATION
II. a. Name INSTALLATION OF MDPE UNDERGROUND PIPING AT STI - BGC
b. Scope of Works: Excavation of Existing Driveway, MDPE Pipe Laying,
Restoration of Driveway.
c. Total Project Cost: Php 50,000
d. Project Location: Bonifacio Global City
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
16
BLUE GAS
SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
17
BLUE GAS
SUPPLY AND INSTALLATION
HON. LOR
t
CITY MAYOR
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
18
BLUE GAS
SUPPLY AND INSTALLATION
is a business name registered in this office pursuant to the provisions of Act 3883, as amended by
Act 4147 and Republic Act No. 863, and in compliance with the applicable rules and regulations
prescribed by the Department of Trade and Industry.
This certificate issued to
Certificate of
Business Name Registration
and issue the same on this 21st day of March 2018 in the Philippines.
RAMON M. LOPEZ
Secretary
TRN 8797882
Documentary Stamp Tax Paid PhP 30.00
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
19
BLUE GAS
SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
20
BLUE GAS
SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
21
BLUE GAS
SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
22
BLUE GAS
SUPPLY AND INSTALLATION
BLUE GAS SUPPLY AND INSTALLATION
+63 977 834 6067 bluegassi@gmail.com @bgsinstallation
23