Professional Documents
Culture Documents
ي إعداد و تصميم المهندس خالد سلسلة دورات تخصصات النفط الدقيقة
الساحل
ي مع تحيات المهندس خالد
هاتف – واتس – تلغرام
00218927697479 – 00218913577926
بنغازي – ليبيا
1
بنغازي – ليبيا الساحل
ي إعداد و تصميم المهندس خالد سلسلة دورات تخصصات النفط الدقيقة
When a tensile load is applied into a drill string, it results in elongation of the drill string.
Oilfield unit
e = (L x T) ÷ (735,000 x W)
Where;
e = elongation, inch
T = tensile load, lb
Note:
The equations are taken from API RP 7G 16th Edition, August 1998.
Example
Determine the pipe elongation from the following data (this example will use “oilfield unit” for
calculation. 5” DP, S-135, 4-1/2” IF Connection. The pipe specification is listed below.
2
بنغازي – ليبيا الساحل
ي إعداد و تصميم المهندس خالد سلسلة دورات تخصصات النفط الدقيقة
W = 23.52 ppf
Length = 8,500 ft
Tensile load applied into the drill string is equal to pick up weight minus block weight.
e = 113.1 inch
References
Coleman, S. (2018). Well Control Quiz Online. [online] Well Control Quiz Online – Test Your
Well Control Knowledge for Free. Available at: http://wellcontrolquiz.com/ [Accessed 2 Aug.
2018].
Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed.
Texas: Springer.
Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf
Publishing.
الساحل
ي مع تحيات المهندس خالد
هاتف – واتس – تلغرام
00218927697479 – 00218913577926
بنغازي – ليبيا