Professional Documents
Culture Documents
FOX610 Compact
Ethernet/MPLS-TP Multiplexer
FOX610 Compact Ethernet/MPLS-TP Multiplexer
Design
FOX610 is designed to meet the most stringent functional, An alarm-interface provides
performance and environmental requirements of the
• 2x Alarm inputs for general purposes
demanding applications in power utility communication
• 2x Alarm output for system-alarms (NO/NC)
networks in a compact and robust 19’’ wide and 1HU
high metallic housing supporting fan-less operation. The integrated DC power supply has redundant inputs.
All interfaces are accessible on the front of FOX610.
Interfaces
On the WAN-side, FOX610 provides
MPLS-TP transport
• 2x SFP+/SFP based 10GBASE/1GBASE FOX610 supports MPLS-TP functionality for construction, operating
• 2x SFP based 1GBASE and maintaining fast and reliable packet-switched networks for
• 1x RJ45 electrical 10/100/1000BASE-T mission critical applications.
Ethernet/MPLS-TP-ports.
MPLS-TP allows provisioning of explicit co-routed bidirectional
connection-oriented paths, static routing, protection (1:1), fast
On the LAN-side, FOX610 provides
restoration mechanisms (below 50ms) and a comprehensive
• 4x SFP based 10/100/1000BASE set of functions for operation and maintenance of a network
• 4x RJ45 electrical 10/100/1000BASE-T without a dynamic control plane and IP forwarding.
Ethernet access ports.
Timing and synchronization
All electrical access ports are supporting PoE and The WAN ports support Synchronous Ethernet (SyncE) and
PoE+ (PoE+ on max. 2 ports at the same time). IEEE 1588v2 (PTP). These options allow for synchronous
timing and a very high timing precision of sub-microseconds
Local management with FOXCST is enabled that are required for various applications. The timing
by a RJ45 10/100BASE-T port. can be distributed to the LAN-side via SyncE.
Power over Ethernet Safety concept
On many locations, Ethernet connections must be provided to a FOX610 offers highest reliability and quality. For this purpose,
variety of PoE capable services like video surveillance, security the unit comes with high MTBF values and an integrated
access control, Voice over IP telephony, and industrial automation. DC power supply with redundant inputs.
FOX610 provides an embedded PoE capability to solve
issues of lack of powering infrastructure, plus the advantage Management
to make installations of this type a lot faster. All FOX610 functions are managed centrally via the management
system FOXMAN-UN or via a local craft terminal (FOXCST).
Interoperability
FOX610 is integral part of the FOX61x system family, and by this
delivers 100% compatibility to the FOX61x system platform.
Ethernet
with PoE
FOX615
Packet Survellance
Switched Network
FOX610 Ethernet
with PoE
Ethernet
with PoE Phone
FOX610
Ethernet
Survellance
RTU
Ethernet Ethernet
1 GbE/10GbE
protected with PoE
Ethernet / MPLS-TP
RTU FOX610 connections FOX610
Ethernet Survellance
with PoE
Ethernet
Phone FOX610
Smart Meter
Ethernet Ethernet
with PoE Ethernet with PoE Ethernet Ethernet
Mechanical
Interfaces (WAN)
Interfaces (LAN)
Synchronization (WAN)
Synchronous Ethernet (SyncE) According to ITU-T G.8262 to transfer clock signals over Ethernet physical layer
SyncE Message Channel (ESMC) According to ITU-T G.8264 for indication of clock quality level.
Precision Time Protocol (PTP) According to IEEE 1588-2008v2 for the synchronization of network clock and time of day (ToD)
Ethernet Functions
VLAN services (WAN & LAN) • Customer bridging acc. to IEEE 802.1Q-2011, 4096 VLANs supported
• Port-based customer VLAN tunneling (Q-in-Q)
• Port-/PCP-/DSCP-based classification (CoS) of ingress traffic with eight priority queues per port
• Maximum frame length of up to 9.216 bytes (Jumbo frames)
Port Mirroring One up to all ports (RX/TX traffic) to a single mirror port
Port Security (WAN & LAN) Ingress Storm Control (flood control, flood rate limiting)
Spanning tree protocols RSTP (Rapid Spanning Tree Protocol), acc. to IEEE 802.1D-2004
(WAN&LAN)
MPLS-TP (WAN) • MPLS-TP function acc. to IETF RFC5921
• Deterministic (static) LSP/PW configuration without the use of control plane protocols
• Co-routed bidirectional LSP supporting 1:1 linear protection environmental specification
• MPLS-TP L2 VPN support for VPWS
MPLS-TP (LAN) Ethernet ports can be used as Pseudo Wire Attachment Circuit (PWAC) ports or
Customer VLAN (CVP) ports in MPLS-TP networks
Reverse Layer 2 Gateway Protocol (R-L2GP) (WAN) According to IEEE 802.1ah on MPLS-TP ports
Alarm-inputs
Management
Functions Management and control of FOX610 with management information, Embedded software download, Alarm
collection and notification, External alarm interfacing via alarm-interface and management, DCN routing for
management traffic
FOXCST Local management system
FOXMAN-UN Central management system
Power Supply
No. of inputs 2
Input voltage nominal (min/max) –48 VDC (–40.5 VDC … –57,6 VDC)
Power consumption without PoE 30 W
Power consumption with PoE 130 W
Ambient Conditions
Storage
Transport
Operation (fanless)
Reliability
Hitachi Energy We reserve the right to make technical changes or modify the We reserve all rights in this document and in the subject matter
© 2022 Hitachi Energy. All rights reserved. contents of this document without prior notice. With regard and illustrations contained therein. Any reproduction, disclosure
4CAE001314 to purchase orders, the agreed particulars shall prevail. Hitachi to third parties or utilization of its contents – in whole or in parts
Energy Ltd. does not accept any responsibility whatsoever for – is forbidden without prior written consent of Hitachi Energy Ltd.
www.hitachienergy.com potential errors or possible lack of information in this document.