Professional Documents
Culture Documents
Phenol-formaldehyde resin used as a cold-set binder for cores and molds which used in
the foundry industry.
Cold mounting or embedding is when a resin is mixed with a hardener (or accelerator) to
provide the mounting compound, and then the polymerization process take place to form
the block.
Application:
As Cold-set binder for cores and molds used in the foundry industry .
Specification
Uses:
Mix 100 pts of dry clean silica sand with 1 pts. Hardener (Para toluene sulphonic acid)
for 2 min. and add 2 pts. Cold set resin for 3 minutes then put the mixture in the clean
mould and released after 30 min
This gives the following bending strengths
Packaging:
Galvanized Steel drums Capacity 250 kg
Safety:
Wearing (gloves - Mask - goggles)
CITY OFFICE:
8, Shooting Club Street, 18th Floor, Dokki, Giza, Egypt
Tel: (202) 7622025, 7623380, Fax: (202)7622175
MANSOURA FOR RESINS & CHEMICAL INDUSTRIES CO. S. A. E.
Factory: Sandoub - Mansoura , Tel: (20-50) 2233152/ Fax: (20-50) 2244744
Email: adm@mriegypt.com / Website: www.mriegypt.com
CITY OFFICE:
8, Shooting Club Street, 18th Floor, Dokki, Giza, Egypt
Tel: (202) 7622025, 7623380, Fax: (202)7622175