Professional Documents
Culture Documents
RoQuest 5000
sulphate. This product was designed to be used in direct filtration
applications for raw waters contain up to 10 NTU turbidity and colour
units of greater than 10 or for feeds that have been mistreated
chemically (e.g. the under or overfeeding of organic polymers).
RoQuest 5000 provides unique performance and If possible, inject RoQuest 5000 at least 5
application benefits: metres upstream of the multi media filters.
This distance allows proper mixing within
the feed stream before introduction into the
! Contains more than 9% soluble ferric ion and
filter. Do not use static mixers ahead of
less than 0.2% ferrous ion.
the filters, as the shear imparted by this
equipment will degrade the polymers
! Capable of producing RO quality feedwater
contained in this formulation.
in direct filtration applications (i.e.
multimedia and sand filters).
Prior to injection into the feed stream, the
RoQuest 5000 should be diluted at a rate
! Compatible with thin film and cellulose
of 4:1 using dechlorinated water.
acetate RO membranes.
Dosing Guidelines :
! Filter-aid properties resist solids
breakthrough. The typical dosage ranges are between 1 to
25 ppm. Approximately 0.25 ppm of
! Low dosage requirements. alkalinity expressed as calcium carbonate
is required per ppm of RoQuest 5000.
! Compatible with Avista’s Vitec 3000 & 5000 Following coagulant addition a minimum
scale inhibitor. of 25 ppm of residual alkalinity is
required. Over dosing of RoQuest 5000
! Effective over a wide pH range. may cause degradation in the quality of the
filtered water.
Packaging: