Professional Documents
Culture Documents
The
difference is usually made as follows. A stern facial expression and male colors are preferred in
bull patterns. However, soft colors close to pink are preferred in fine patterns. In addition,
creating a smiling face expression is one of the most important aspects of cow designs. You don’t
have to make a mouth like you see in the picture, but if you want to stick to the pattern, I
recommend you do it. If you want to see more examples of crochet cow patterns we have
quite a few on our site.
Abbreviations
AR – Amigurumi Magic ring
MR – Amigurumi Magic ring
App – application
ll – lift loop
sc : Single Crochet
inc : Increase
ol: ofset loops
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc”
abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
BL : Bobble Stitch – do 5dc all in the same stitch and then yarn over and pull through all the loops
on your hook (the original loop + 1 loop for each partially completed dc).
Arms
We start with brown yarn
1 р. – 6 sc in MR (6)
2 р. – 6 inc (12)
3 р. – (3 sc, 1 inc) *3 (15)
Change the yarn color to beige
4 – 5 р. 15 sc (15)
6 р. – (3 sc, dec.)*3 (12)
7 р. – (4 sc, dec.)*2 (10)
Fill the handle with holofiber. Further, do not fill, so that the hands do not bulge after being tied
into the body.
8-16 р. – 10 sc
17 р. Fold the handle in half and connect by knitting 5 sc. Fasten and cut the yarn.
We knit the second hand in the same way.
Tail
1 p. Dial with brown yarn 5 sc in MR.
2 – 5 p. – 5sc
Change yarn to body color
6-18 p. – 5 sc.
Knit a ponytail to the desired length.
Cut the yarn, leaving the tip for sewing to the body.
Legs (2 times)
We start with brown yarn
1 р. – 5 sc in MR (5)
2 р. – 5 inc (10)
3 р.- behind the back loop (half loops)10 sc (10)
4 р. – 1 inc 9 sc (11)
Change the yarn to beige
5 р.– 11 sc
6 р. – 1 inc, 10 sc (12)
7-10 р. -12 sc (12)
11 р. – 6 sc., slst. These are offset loops (ol)
Fasten the yarn, cut off.
We knit the second leg in the same way, only we knit 10 ol and do not cut the yarn!
Fill the legs tightly.
Body
Continue knitting with beige yarn. Connect the legs: 3ch, slst at the base of the last column of
the first leg, 12 sc along the first leg, 3 sc along the chain of ch, 12 sc along the second leg, 3 sc
along the back of the chain ch. (30)
We put a marker – this will now be the beginning of knitting the body.
1 р. – 30 sc (30)
2 р. – (4 sc 1inc,) * 6 (36)
3 р. – (5 sc 1inc,) * 6 (42)
4 -10 p. – 42 sc
11 р. – (5 sc, dec) * 6 (36)
12 – 13 р. – 36 sc (36)
14 р. -(4 sc, dec) * 6 (30)
15 р. – 30 sc
16 р. – (8 sc.dec)*3 (27)
17 р.- 27 sc
18 р. – (7 sc.dec)*3 (24)
19 р. – 24 sc
20 р. – (6 sc.dec)*3 (21)
We knit hands
21 р. – 5 sc, 5 sc (knit the hand), 6 sc, 5 sc ( knit a hand) (21)
22 р. – 7 sc, 1 dec., 4 sc, 1 dec., 3 sc, 1 dec., 1 sc. (18)
23 р. – 15 sc, slst. Fasten the yarn, cut, leaving the tail of the yarn for sewing.
(thus, we do not knit to the end, this is necessary so that from the back in the neck area it is
higher than from the front. So the head will look better when fastening)
The body is connected.
Head
We start with pink yarn.
Dial 6ch
1 р. – starting from the second st from 4 sc., 3 sc in one st, 3 sc along the second side of the
chain, 1 inc(12)
2 р. – inc, 3 sc, 3 пр, 3 sc, 2 inc (18)
3 р. – 1 sc, inc, 3 sc, (1 sc, inc) * 3, 3 sc, (1 sc, inc)* 2 (24)
4 р. – 2 sc, inc, 3 sc, (2 sc, inc) * 3, 3 sc, (2 sc, inc)* 2 (30)
5 р. – 30 sc
6 р. – dec., 4 sc, dec, 6 sc, dec, 6 sc, dec, 6 sc (26)
7 р. – dec, 9 sc, dec, 13 sc (24)
We knit 5 ol (the beginning next to it will now be in the middle of the head)
Change yarn color to body color
8 р. – 24 sc
9 р. – inc, 5 sc, 1 inc, 3 sc, 5 inc, 3 sc, 1 inc, 5 sc (32)
Make sure the increases are in the middle.
Face tightening
To begin with, we make a tightening.
We outline the places for tightening with pins (see photo).
Tightening using a needle with a yarn of the color of the muzzle (the yarn with which the muzzle
was knitted). First, insert the needle from the bottom of the head (so that the tip is fixed), draw
out the yarn at point 1, then insert the needle at point 3 and return to point 1. Now draw the
needle at point 5 and return to point 1. These were tightenings in the eye area. The next step is
to introduce the needle to point 4, then to point 2 and return to point 4. Return to point 1.
Fasten the yarn.
Ears (2 times)
Knit with body color
1 р. – 5sc in MR
2 р. – 5 inc- (10)
3-5 р – 10 sc (10)
6 р.- fold the handle and knit 4 sc together (attention not 5 sc, but 4sc!)
Fasten the yarn and cut off the yarn, leaving the tip for sewing.
Horns (2times)
Knit in brown
1 р. – 5sc in MR
2 р. – 1 inc, 4 sc (6)
3 р. – 1 inc, 5 sc (7)
4-6 р – 7 sc
Fasten the yarn and cut off the yarn, leaving the tip for sewing.
Sew on the horns on rows 18 and 19 (i.e. between rows 17 and 20) 3 sc apart.
Sew on the ears between rows 18 and 19 at a distance of 1-2 sc from the horns.
When sewing on the ears, first we pull them slightly, as if we are smoothing in half. And only
then sew them on.
mouth
1 р. – 5 sc in MR
2 р. – 5 inc (10)
3 р. – (1 sc, inc)*5 (15)
4 р. – fold in half and knit together on both sides 7 sc How to sew a mouth, look at the photo.
Sew on the head.
First you need to attach the head to the body with pins and only when you like the result, sew.
Sew the tail on the back. You can sew a brush to the tip of the ponytail.
Scarf
Choose the appropriate color for the scarf.
We collect the required number of loops, apply to the bull, determine the length. We knit in
pivoting rows for the back half loop 3 rows.
Yashka the goby is ready!
You can use any color for the bull, as well as the color of clothing.
In general, your imagination, a hook and straight posts !!!
Goby Yashka
from Svetlana Glotova