Conduct a visual inspection of structural elements and take measurements based on as-built plans. Use rebar locators to determine existing reinforcement where possible. Note and photograph any cracks, deflections or defects observed. Perform load analysis to investigate stresses under gravity and lateral loads according to code requirements. Provide a findings report, observations, recommendations, and stability certificate upon completing the analysis.
Conduct a visual inspection of structural elements and take measurements based on as-built plans. Use rebar locators to determine existing reinforcement where possible. Note and photograph any cracks, deflections or defects observed. Perform load analysis to investigate stresses under gravity and lateral loads according to code requirements. Provide a findings report, observations, recommendations, and stability certificate upon completing the analysis.
Conduct a visual inspection of structural elements and take measurements based on as-built plans. Use rebar locators to determine existing reinforcement where possible. Note and photograph any cracks, deflections or defects observed. Perform load analysis to investigate stresses under gravity and lateral loads according to code requirements. Provide a findings report, observations, recommendations, and stability certificate upon completing the analysis.
ITEM DESCRIPTION COMPLY/NOT COMPLY PROVIDE REASON FOR NOT COMPLYING GEN. REQUIREMENTS 1 Conduct visual inspection of the exposed structural elements. Conduct measurements of exposed structural elements based on the as-built 2 plans provided Wherever possible, we shall determine the existing reinforcing bars 3 with the use of our Rebar locator based on the As-built Provided When discovery of any structural manifestations such as cracks, deflections or other defects, we shall note them down in the form of 4 sketches indicating the type and magnitude of such defects. We will take pictures of such observations and provide rectification recommendations and action plans. To perform gravity load as well as lateral load analysis and 5 investigate the stresses based on applicable code requirements To provide Findings, observation, Recommendation Report and Structural 6 Stability Certificate upon completion of analysis 7 8 9 10