Professional Documents
Culture Documents
Horn is made in the round, so there will be no joining Round 15: SC around (20)
and chaining up after each round.
Round 16: INC, SC 9, INC, SC 9 (22)
Round 1: SC 6 into magic ring. Put a stitch marker into
the 6th sc. Round 17: SC around (22)
(CROCHET UNICORN WALL HANGER)
SL ST into the last stitch (your 22nd stitch from round Round 2: Going directly into the top of the first stitch
17) and tie off leaving a long tail for assembly. from round 1. INC, SC 2, INC, SC 2 (8) Move your stitch
marker into the 8th SC.
Sew in your first tail.
Continue moving your stitch marker into the last stitch
Ears – Using G (4.0mm) hook in each round so you will know where the next round
should end.
Horn
Squish your unicorn horn until its flat, 2D triangle, with
your tail on the right side of the triangle.
Right Ear
The ears are attached the same way as the horn.
There should be 8 stitches in total. (Because the last Repeat for all flowers.
row of the ear had 16 stitches)
Fringe
Left Ear Decide how long you want your fringe to hang down
Starting at the left-side edge of your horn, count out 4 from the bottom of your wall hanging, and double it.
stitches on the body of your wall hanger. These 4
stitches will be the gap between your horn and right Mine fringe hangs down about 13 inches. So each
ear. piece of yarn is about 26 inches long.
Begin attaching your ear in the next stitch (so the 5th Pro Tip: Cutting fringe is easier if you use a template,
stitch from your horn) wrap your yarn around and around your template,
then cut all the fringe at once. I used a tote lid for my
Again, there should be 8 stitches total. fringe.
Attach fringe pieces in each stitch across the bottom of
After you sew on all 3 pieces of your unicorn, tie off your wall hanging.
and sew in all your tails.
For a fuller look, I attached one fringe piece in the first
Attaching your flowers stitch, then two fringe pieces in the second stitch and
After you make all of your flowers, line them up onto repeated that across the bottom.
your wall hanging and decide which order you want
them to go in My fringe was across 36 stitches.
Starting in the center, right under your horn, and I aligned each color section of the fringe with its
working your way out, attach each flower to the body matching color flower.
of your wall hanging.
To attach fringe, fold your fringe yarn in half, insert
Here is where I use the tails that were left after making your hook into the stitch from the back of your wall
each flower. I pull both tails down into the body of the hanging, grab the center of the fringe yarn (where its
wall hanging, thread the longest tail onto my tapestry folded) and pull it through the stitch (this creates a
needle, and secure each flower down with a few loop on your hook).
stitches.
Grab the fringe yarn with your hook and pull it through
the loop. Repeat for all your fringe.
(CROCHET UNICORN WALL HANGER)
Optional Tip: You can use a garment steamer to
straighten your fringe, then trim it with some super
sharp scissors for a finished look.
I hope you love your new Crafty Unicorn Wall Hanger! I
think these beauties are so magical and would be the
perfect addition to any unicorn themed room or
office!