The document reports test results for properties and sieve analysis of fine aggregate samples 01 and 05. For both samples:
1) Specific gravity, water absorption, silt content, bulk density, and fineness modulus were tested according to Indian standards.
2) Sieve analysis was conducted according to Indian standards to determine particle size distribution and compliance with grading zone IV standards.
3) Both samples met most standards except for higher silt content and fines less than 0.075mm sieve size.
The document reports test results for properties and sieve analysis of fine aggregate samples 01 and 05. For both samples:
1) Specific gravity, water absorption, silt content, bulk density, and fineness modulus were tested according to Indian standards.
2) Sieve analysis was conducted according to Indian standards to determine particle size distribution and compliance with grading zone IV standards.
3) Both samples met most standards except for higher silt content and fines less than 0.075mm sieve size.
The document reports test results for properties and sieve analysis of fine aggregate samples 01 and 05. For both samples:
1) Specific gravity, water absorption, silt content, bulk density, and fineness modulus were tested according to Indian standards.
2) Sieve analysis was conducted according to Indian standards to determine particle size distribution and compliance with grading zone IV standards.
3) Both samples met most standards except for higher silt content and fines less than 0.075mm sieve size.