Professional Documents
Culture Documents
LEARNING PLAN
Before you start with the lesson answer the preliminary activity on Page 6 of
your module. In this activity you are going to list 5 importance of maintaining
hand tools. Follow the format below. Copy and answer the activity on a
separate sheet of paper.
PRELIMINARY ACTIVITY
Direction: Answer the following questions carefully. Write your answer in one
whole sheet of paper/
1.
2.
3.
4.
5.
B. Development 1 Hour Assess your prior knowledge about the topic by answering the pretest.
Pagpapaunlad LEARNING ACTIVITY: PRE-TEST Lesson 1
Direction. Select the letter of the correct answer. Write your answers on a separate sheet of
paper.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that
a screwdriver tightens screws.
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
6. Which tool is used to clean different computer components without scratching or leaving
debris?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head screwdriver
7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head screwdriver
9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a
feature that is mainly found on laptop?
a. Anti-static mat b. Torx screwdriver c. Philips head screwdriver d. Wire cutter
10. Which tool is used to blow away dust and debris from different computer parts without
touching the components?
a. Anti-static mat b. Hex driver c. Compressed air d. Wire cutter
http://www.bechtel.com/assets/files/Environmental/ToolboxSafetyTopics/20 10/
After answering the activities, read and understand the lesson on page 8-13 of your Self-
learning Module. Click this link to access the SLM.
https://drive.google.com/drive/folders/1avMN7M9BI2mLt6xh6VQn 81oYj283zGtf?
fbclid=IwAR2TtQ7qGhK4PzjNkEYP7tjE3kGfuoVwvtqh
6Itv28wO_lh54VUEZYI3HLw
C. Engagement 1 Hour After reading and understanding the lesson on page 8-13 of your module, answer the
Pakikipagpalihan following activities:
LEARNING ACTIVITY: Self-Check 1.1
Direction. Write TRUE if the statement is correct and FALSE if it is wrong. Write your
answers on a separate sheet of paper.
1. Selecting the best tool for each task requires training in the proper use of the
tools, field experience in their safe use, and following the manufacturer’s guidance and
instructions for that specific tool.
2. When obtaining the tool, all the associated tooling and consumable parts, as
recommended by the manufacturer, must be included.
3. The safe use of a tool depends on using the tool for the purpose for which it was
designed and also for other purposes where it can be used as substitute where tool is not
available.
4. All tools should be kept in good condition with regular maintenance.
Suggested
IV. LEARNING PHASES Learning Activities
Timeframe
5. Preparing for a task includes only knowing the task to be done.
2. 5.
3.
Images retrieved from Ron Gilster, PC Repair Bench Book., Wiley Publishing Inc., 10475 Crosspoint
Boulevard, Indianapolis, IN 46256 · Barry Press, Marcia Press, PC Upgrade and Repair Bible, Desktop
Edition., Wiley Publishing Inc., 10475 Crosspoint Boulevard, Indianapolis, IN 4625
D. Assimilation 10 Minutes
Paglalapat Continue answering these activities to sharpen your knowledge about hand tools used in
computer system servicing.
4. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a
feature that is mainly found on laptop?
a. Anti-static mat b. Torx screwdriver c. Philips head screwdriver d. Wire cutter
5. Which tool is used to blow away dust and debris from different computer parts without
touching the components?
a. Anti-static mat b. Hex driver c. Compressed air d. Wire cutter
6. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
8. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that
a screwdriver tightens screws?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire cutter
10. Which tool is used to retrieve parts from location that are too small for your hand to fit?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head screwdriver
VI. REFLECTION 10 Minutes Write your personal insights about the lesson using the prompts below.
I understand that .
I realize that .
I need to learn more about .
Prepared by: Ma. Lucia R. Malimata Checked by: Belinda D. Malilang