Professional Documents
Culture Documents
Oral Examination
Observation with
Questioning
The evidence must show that the candidate……
Identifies object or components to be measured. x
Obtains correct specifications from relevant source. x
Selects appropriate measuring instrument according to
x
job requirements.*
Obtains accurate measurements to the job. x
Performs calculation needed to complete work tasks.* x
Uses calculations involving fractions, percentages and x
mixed numbers to complete workplace tasks.*
Self-checks & corrects numerical computation for x
accuracy. *
Reads instruments to the limit of accuracy of the tool. x
Keeps measuring instruments free from corrosion.* x
Measuring instruments not dropped to avoid damage.* x
Cleans measuring instruments before & after using.* x
Candidate name:
Trainer’s name: JOHN JAY T. CARNECER
Institution: DNIT
Qualification Automotive Servicing NC II
Unit of Perform Mensuration and Calculation
competency:
Instructions for the trainer:
1. Observe the candidate ______________________________________________
2. Describe the assessment activity and the date on which it was undertaken.
3. Place a tick in the box to show that the candidate completed each aspect of the
activity to the standard expected in the enterprise.
4. Ask the candidate a selection of the questions from the attached list to confirm
his/her underpinning knowledge
5. Place a tick in the box to show that the candidate answered the questions
correctly.
6. Complete the feedback sections of the form.
Date of observation
Description of assessment
activity
Location of assessment
activity
The candidate…. If yes, tick the box
Selects appropriate measuring instrument
according to job requirements.*
Performs calculation needed to complete work
tasks.*
Uses calculations involving fractions,
percentages and mixed numbers to complete
workplace tasks.*
Self-checks & corrects numerical computation
for accuracy. *
Reads instruments to the limit of accuracy of
the tool.
Keeps measuring instruments free from
corrosion.*
Measuring instruments not dropped to avoid
damage.*
Cleans measuring instruments before & after
using.*
Did the candidate’s overall performance meet the Yes No
standard?
Questions Satisfactory
response