Professional Documents
Culture Documents
The Steel plate proposed as Partition in the MBR Tank is designed using Latest IS
codes and reference from Standard Indian Authors SK Duggal & BC punmia.
The proposed Plate of 3.0m wide and 3.80m Height is basically divided in panels of
0.75m x 1.25m maximum.
The vertical height of Lx 3.8 m is divided into three horizontal plates, each of 1.225m,
1.25m & 1.25m respectively from bottom. The plate is also divided into 4 equal vertical
strips with a width of 0.75m each forming the loaded panel size as 1.25m height x
0.75m width.
Input Data:
2
Stress in Steel plate (MS) = 250 N/mm
Lx/Ly = 0.789
Design of plate:
t= thickness of plate
2
f= stress in plate = 0.88x0.6x250 132 N/mm
t = 4.62 mm
Stay/(Horizontal Stiffener)
The vertical height of 3.8 m is divided into three horizontal plates, each of
1.225m, 1.25m & 1.25m respectively from bottom
the plate is also divided into 4 equal vertical strips with a width of = 0.75 m
Tx0.75= 54150
therefore T = 72200 N
2
Area required Anet = 72200/0.8x0.6x250 601.666667 mm
2
SP 6(1) pg: 23 select ISA 75 75x75x5 mm with an area of = 727 mm
Vertical Stiffener
MR= fxZ
= 2904 Nmm
Thickness of weld = 0.7 x8mm say 6mm weld required (Vertical Stiffener)
Summary of results:
The vertical height of 3.8 m is divided into three horizontal plates, each of 1.225m, 1.25m & 1.25m
respectively from bottom
The plate is also divided into 4 equal vertical strips with a width of 0.75m each
plate thickness = 6 mm
select ISA 75 75x75x5 mm with
Stay/(Horizontal Stiffener) an area of =727mm2
Vertical Stiffener
Hence provide ISA 75x75x8
back to back angles as stiffeners
References:
Concrete Structures for Retaining Aqueous Liquids - Code of Practice IS 3370 (Part4/sec1): 2021