Professional Documents
Culture Documents
LAB#: 3
AIM: a) To find the weight of a given body using the parallelogram law of vectors.
APPARATUS: wooden board, stone, thread, pulleys, water, liquid (oil), beaker, slotted weights.
THEORY: If two forces (vectors) acting simultaneously at a point are represented in magnitude
and direction by the adjacent sides of a parallelogram, then their resultant is represented in
magnitude and direction, by the diagonal of the parallelogram passing through the point of
intersection of the two forces.
If a third force W is so applied at the point of intersection of the above two forces that the
common point of application of all the forces is in equilibrium, then the third force is equal in
magnitude but opposite in direction to the sum of the other two forces. This force is called the
equilibrant force.
Let P and Q be magnitudes of two forces acting at a point and θ be the angle between them. Let
R and R’ be the magnitude of their resultant and equilibrant, then R’=R=√(P2+Q2+2PQcos θ)
Responding: angle
1) A thread of appropriate length, carrying two weight hangers at its end was passed over
the pulleys and slotted weights were added in the weight hangers, as required. Another
thread is tied to the first, at the point O, between the two pulleys.
2) The given solid, whose weight is to be determined, was suspended at the end of the
string. Care was taken to see that the weight did not touch the wooden board but hung
freely. The body was pulled down a little and released to eliminate the friction of the
pulleys.
3) The weights P and Q were adjusted so that the knot was near the middle of the wooden
board. When the forces were in equilibrium, the position O of the knot was marked on the
paper, just underneath it, using a fine point pencil. The directions OX, OY and OZ of the
strings were also marked on the paper. The weights P and Q on the hangers (including the
weight of the hangers) were noted.
4) The paper was removed, and the three points marked on the paper were joined and
extended to meet at the point O. The three lines thus obtained represented the directions
of the forces acting at point O.
5) Steps 3-4 were repeated for when the stone was submerged in water and oil.
6) The forces P and Q were represented by OA and OB along OX and OY respectively and
a CONVENIENT SCALE was chosen. The parallelogram OADB is completed and the
diagonal OD was drawn. Then the parallelogram law of forces, OD gives the resultant of
P and Q in magnitude and direction. Since the system is in equilibrium, the resultant of P
and Q is equal and opposite to the third force, namely the weight of the body. The
diagonal OD is measured, and the weight of the given body is found by multiplying OD
with the scale used. The weight obtained above is also verified by using the equation: W
= √(P2+Q2+2PQcosθ).
RESULTS:
TABLE SHOWING
Body In: Trial P/g Q/g OA/cm OB/cm Diagonal Unknown Mean/N
wt wt OD/cm wt
W = OD
x scale/N
Air 1 100 100 5 5 5.1 1.001 (1.001+0.981)/2=
0.991
2 200 200 5 5 5 0.981
Water 1 100 100 5 5 4.3 0.844 (0.844+0.863)/2=
0.854
2 200 200 5 5 4.4 0.863
Liquid 1 100 100 5 5 4.4 0.863 (0.863+0.8829)/2
=0.859
2 200 200 5 5 4.5 0.8829
Diagrams
Air 1
Air 2
Water 1
Water 2
Liquid 1
Liquid 2
CALCULATIONS: 100g = 5cm
= 60o
= √(52 + 52 - 2 x 5 x 5 cos60)
= 5cm
= 49o
● Length of OD received
= √(52 + 52 - 2 x 5 x 5 cos49)
= 4.15cm
= 53.5o
● Length of OD received =
= √(52 + 52 - 2 x 5 x 5cos53.5)
= 4.5cm
● Weight of body in air W1 =
Using Scale : 5cm = 100g
5𝑐𝑚 → 𝑔 = 5 × 20 = 100𝑔
100𝑔 = 0. 1𝑘𝑔
0. 1𝑘𝑔 × 9. 81𝑁/𝑘𝑔 = 0. 981𝑁
= 1. 085kg/l
PRECAUTIONS:
1. Care should be taken to ensure that the weight hangers are not touching the wooden
board or any other object, and that the weight of the hangers is included in the
measurements.
2. The pulleys should be free from any friction to ensure that the forces acting on the knot
are accurate.
SOURCES OF ERROR:
1. Changes in temperature can affect the density of the fluid, which in turn could affect the
buoyancy force.
2. The angle between the forces could be difficult to measure accurately, leading to errors in
the calculation of the weight of the body using the parallelogram law of vectors.
CONCLUSION:
The weight of a given body was found to be 8. 829 N, the density of the solid 0.014kg/l and the
density of the liquid was determined to be 1.085kg/l
Parallelogram law –O/R/R
Drawing of parallelogram 3
Adequate 1
size 1
Proportionality 1
Appropriate 1
Total 12