Professional Documents
Culture Documents
Elements of
Technical Drawings
1
REPRESENTATION OF AN ASSEMBLY – ISO STANDARD LINES (I)
Line Thickness
Letter Type of Line Application
(mm)
0,70 for A0-A1
A Continuous – Thick
0,50 for A2-A4
• Visible outlines
• Fictitious outlines
• Imaginary intersection of surfaces
• Dimension lines, projection lines,
intersection lines and leaders
0,35 for A0-A1
B Continuous – Thin
0,25 for A2-A4
• Hatching
• Outlines of revolved sections
• Adjacent parts and tooling
• Fold and tangent bend lines
• Short centerlines
Continuous - Thin,
0,35 for A0-A1 • Indication of repeated detail
C freehand or ruled
0,25 for A2-A4 • Break lines (other than on an axis)
with zig-zag
• Centerlines
• Pitch lines
• Alternative position of moving part
0,35 for A0-A1
E Chain - Thin
0,25 for A2-A4
• Path lines for indicating movement
• Features in front of a cutting plane
• Developed views
• Material to be removed
Chain - Thick at ends
0,35 for A0-A1
F and at change of
0,25 for A2-A4
• Sectioning planes
direction, thin elsewhere
0,70 for A0-A1 • Indication of surfaces to meet
G Chain - Thick
0,50 for A2-A4 special requirements
2
DRAWING SIZES (I) - ISO (or METRIC)
3
DRAWING SIZES (III) - ANSI vs. ISO
4
DRAWING ELEMENTS (II) - PROJECTION SYMBOL
(COMPANY NAME)
(PROJECT NAME)
(DRAWING NAME)
5
BOM, BILL OF MATERIALS (LISTA DE PIEZAS/MATERIALES) (I)
6
BOM, BILL OF MATERIALS (LISTA DE PIEZAS/MATERIALES) (III)
Lesson IIc.
Elements of Technical Drawings
GRAPHICS ENGINEERING